उत्पाद वर्णन
WPDO speed reducer,; worm gear box
| Rated Power | 5.;5kw |
| Output Speed | 23~140rpm |
| Output Torque | 19-2745n.;M |
| Ratio | 1/10~1/60 |
Model NO.;:; WP series Manufacturing Method:; Cast Gear
Toothed Portion Shape:; Spur Gear Type:; Worm and Wormwheel
Gearing Arrangement:; Worm Output Torque:; 19-2745n.;M
Rated Power:; 5.;5kw Input Speed:; 1400
Output Speed:; 23~140rpm Place of Origin:; ZHangZhoug,;China
Model Number:; Wpdo Brand Name:; EED
Color:; Green,;Yellow or According to Custom Extra Service:; OEM Welcome!!!
Specification:; SGS,; ISO9001 Origin:; ZHangZhoug,; China
HS Code:; Worm gear box
1.; Widely used in turbines,; shaft liners and axletrees,; good resistance to wearing,; with high precision in dimensions,; lower noise,; advanced centric running castings
2.; Without vent and highly precision
3.; The whole structure is compact and the weight is larger
1.; Notice of installation
1.;1 Thebase-plate must be plane and stoutness,; and the base-plate must be screwed downand shockproof.;
1.;2 Theconnecting shaft of prime mover,; reducer and operation device must be coaxialinstallation.;
1.;3 Thediameter tolerance zone of input and output shaft is H6,; the holes of fittings(such as couplings,; belt-pulley,; sprocket wheel and so on); must properly matethe shaft,; which prevents bearing from breakage because of over-loose mate.;
1.;4 Driverssuch as sprocket wheel and gear must be fitted close to bearings in order toreduce bending stress of hanging shaft.; 1.;5 Whiteassembling motor of WPD reducer,; it is necessary that proper amount of butterapplies to the worm shaft input hole and keyway,; avoiding assembling tootightly and rusting after using for a long time.; 1.;6 WhenOrdering or using all kinds of WPD type,; if the motor weight is binger than thecommon,; supporting set is required.;
2.; Notices of usage
2.;1 Before using,; please check carefully whether the reducer model,; distance,; ratio,; input connecting method,; output shaft structure,; input and output shaftdirection and revolving direction accord with requirement.;
2.;2 According to the requirement of selecting lubricant oil in the productmanual,; please fill proper category and brand lubricant.; And then screw on thevent-plug; Unlock the small cone-plug of vent-plug.; Only after doing these,; reducer is already for starting up running.; The proper brand and adequatelubricant oil is required,; replacing oil in time conforming to the request ofproduct manual is also necessary,; especially after using first 100 hours,; it isrequired refilling new oil.;
2.;3 Whenabnormal circumstances occur,; please stop and check reducer per solutions andreasons for faults of reducer (allowable highest oil temperature is 95,; under this temperature limit,; ifoil temperature no more goes up,; please let reducer continue running);
| Application: | Motor, Machinery, Agricultural Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Layout: | Coaxial |
| Gear Shape: | Conical – Cylindrical Gear |
| Step: | Single-Step |
| अनुकूलन: |
उपलब्ध
| अनुकूलित अनुरोध |
|---|
Adjusting Tension on a Mower Gearbox Belt
Proper tension adjustment of the gearbox belt in your mower is crucial for optimal performance and belt longevity. Follow these steps to adjust the tension:
- Preparation: Turn off the mower’s engine and disconnect the spark plug wire to ensure safety.
- Locate the Adjustment Mechanism: Identify the tension adjustment mechanism on the mower. This could be a tensioning bolt, an adjustable bracket, or another mechanism depending on the mower model.
- Loosen Bolts: If your mower has tensioning bolts, slightly loosen the mounting bolts securing the gearbox in place. This allows the gearbox to move and adjust tension.
- Adjust Tension: Use the tension adjustment mechanism to increase or decrease the tension on the belt. Refer to your mower’s manual for recommended tension specifications.
- Check Tension: After adjusting, check the tension by pressing down on the belt at a midpoint between the pulleys. The belt should give a little, but not excessively. Also, check for proper alignment of the pulleys.
- Tighten Bolts: Once the tension is set correctly, tighten the mounting bolts of the gearbox to secure it in place.
- Test Operation: Reconnect the spark plug wire and start the mower to observe the belt’s operation. Listen for any unusual noises and monitor the belt for proper engagement with the pulleys.
Regularly checking and adjusting the tension of the gearbox belt ensures efficient power transmission and prevents premature wear. If you’re unsure about the proper tension adjustment, consult your mower’s manual or seek assistance from a professional.
अपने लॉन मोवर के लिए सही मोवर गियरबॉक्स का चयन करना
अपने लॉन मोवर के लिए सही गियरबॉक्स का चयन करते समय अनुकूलता, प्रदर्शन और दीर्घायु सुनिश्चित करने के लिए कई महत्वपूर्ण कारकों पर विचार करना आवश्यक है:
- घास काटने की मशीन का प्रकार: रोटरी मोवर, रील मोवर और फ्लेल मोवर जैसे विभिन्न प्रकार के मोवरों के लिए विशिष्ट गियरबॉक्स डिज़ाइन की आवश्यकता हो सकती है। अपने मोवर के प्रकार के अनुरूप गियरबॉक्स चुनें।
- शक्ति और टॉर्क: अपने लॉन घास काटने की मशीन की शक्ति और टॉर्क आवश्यकताओं की गणना करें ताकि यह सुनिश्चित हो सके कि गियरबॉक्स बिना किसी तनाव के भार को संभाल सके।
- माउंटिंग अनुकूलता: सुनिश्चित करें कि गियरबॉक्स के माउंटिंग पॉइंट आपके लॉन घास काटने की मशीन के माउंटिंग पॉइंट से मेल खाते हों। सही इंस्टॉलेशन और कार्यक्षमता के लिए अनुकूलता अनिवार्य है।
- शाफ्ट का आकार और प्रकार: गियरबॉक्स और लॉन मोवर दोनों के शाफ्ट के आकार और प्रकार पर विचार करें ताकि यह सुनिश्चित हो सके कि उन्हें सुरक्षित रूप से जोड़ा जा सके।
- गियर अनुपात: अपनी विशिष्ट आवश्यकता के अनुसार वांछित कटाई या घास काटने की गति प्रदान करने वाला गियर अनुपात चुनें।
- गुणवत्ता और ब्रांड: उच्च गुणवत्ता वाले गियरबॉक्स बनाने के लिए प्रसिद्ध प्रतिष्ठित ब्रांड का चयन करें। उच्च गुणवत्ता वाले पुर्जे टिकाऊपन और बेहतर प्रदर्शन में योगदान देते हैं।
- रखरखाव संबंधी आवश्यकताएँ: गियरबॉक्स की रखरखाव संबंधी आवश्यकताओं पर विचार करें और ऐसा गियरबॉक्स चुनें जो नियमित रखरखाव करने की आपकी तत्परता के अनुरूप हो।
- बजट: गुणवत्ता महत्वपूर्ण है, लेकिन अपने बजट को ध्यान में रखें और अपनी वित्तीय सीमाओं के भीतर सर्वोत्तम गुणवत्ता वाले गियरबॉक्स का चयन करने का लक्ष्य रखें।
अपने लॉन मोवर के मॉडल और उपयोग के लिए सही गियरबॉक्स चुनने के लिए, कृपया अपने मोवर के मैनुअल या किसी पेशेवर से सलाह लें। सही गियरबॉक्स चुनने से मोवर का संचालन सुचारू रूप से होता है और उसकी आयु भी बढ़ती है।
Function of a Mower Gearbox
A mower gearbox operates through a series of gears and components that work together to transmit power and convert the rotational motion of the engine into the cutting action of the blades. Here’s how a typical mower gearbox works:
- Power Input: The mower gearbox receives power from the mower’s engine via a drive shaft.
- Gear Reduction: The gearbox contains a set of gears that are arranged in specific ratios to achieve the required torque and speed conversion. The input gear, connected to the drive shaft, meshes with one or more intermediate gears.
- Torque Conversion: As the input gear turns, it drives the intermediate gears. The gear arrangement within the gearbox results in a reduction of speed and an increase in torque. This is essential for providing the cutting blades with the necessary force to cut through vegetation.
- Blade Connection: The output shaft of the gearbox is connected to the cutting blades. As the gearbox output shaft rotates, it transfers the torque to the blades, causing them to spin.
- Blade Rotation: The rotational motion of the blades is what enables them to cut through grass and other vegetation. The increased torque generated by the gearbox allows the blades to effectively perform cutting or mulching actions.
Modern mower gearboxes are designed for efficiency, durability, and precision. They are often equipped with ball bearings, seals, and lubrication to minimize friction and ensure smooth operation. Some mower gearboxes also include additional features such as adjustable cutting heights, blade synchronization, and directional control to enhance the versatility of the mower.
editor by CX 2023-10-27
