Deskripsi Produk
| Product Features | Description |
| Product Models | T2, T4, T6, T7, T8, T10, T12, T16, T20, T25, Z2, Z4, Z6, Z7, Z8, Z10, Z12, Z16, Z20, Z25, JRTM2, JRTM4, JRTM6, JRTM7, JRTM8, JRTM10, JRTM12, JRTM16, JRTM20, JRTM25 |
| Pemeliharaan | Clean internally and replace lubricant after initial use of 2 weeks or 100-200 hours. For long-term use, replace lubricant every half to 1 year or every 1000-2000 hours |
| Lubricant | China Petroleum’s all-effect gear oil of 90-120 degrees. Under low speed and light load conditions, it is recommended to use all-effect gear oil of 90 degrees. Under heavy load and high temperature conditions, it is recommended to use all-effect gear oil of 120 degrees |
| Deskripsi Produk | The T series spiral bevel gear steering gearbox is widely used in food, pharmaceutical, chemical, steel, metallurgy, textile, plastic, paper and other machinery equipment, assembly lines and other industries |
| Technical Features | The gearbox has a high rigidity FC-25 cast iron casing. The gears are made of high-quality high-purity alloy steel 20CrMnTi carburized and quenched, and ground. The shaft is tempered alloy steel with high load-bearing capacity. It is equipped with a heavy load-bearing tapered roller bearing. The oil seal has a double lip seal, which has dustproof and oil leakage prevention capabilities |
| Performance Features | The T series spiral bevel gear steering gearbox is standardized and has many varieties. The speed ratio is all actual transmission ratios, with an average efficiency of 98%. It can run CZPT and reverse, with smooth low-speed or high-speed transmission, low noise, small vibration, and large bearing force |
| Technical Parameters | Speed ratio range: 1/1, 1.5/1, 2/1, 2.5/1, 3/1, 4/1, 5/1. Torque range: 11.2 – 5713 Nm. Power range: 0.014 – 335 kW |
·Product Models: T2, T4, T6, T7, T8, T10, T12, T16, T20, T25, Z2, Z4, Z6, Z7, Z8, Z10, Z12, Z16, Z20, Z25, JRTM2, JRTM4, JRTM6, JRTM7, JRTM8, JRTM10, JRTM12, JRTM16, JRTM20, JRTM25.
·Maintenance: The gearbox should be cleaned internally and the lubricant should be replaced after the initial use of 2 weeks or 100-200 hours. For long-term use, the lubricant should be replaced every half to 1 year or every 1000-2000 hours.
·Lubricant: The product uses China Petroleum’s all-effect gear oil of 90-120 degrees. Under low speed and light load conditions, it is recommended to use all-effect gear oil of 90 degrees. Under heavy load and high temperature conditions, it is recommended to use all-effect gear oil of 120 degrees.
·Product Description: The T series spiral bevel gear steering gearbox is widely used in food, pharmaceutical, chemical, steel, metallurgy, textile, plastic, paper and other machinery equipment, assembly lines and other industries.
·Technical Features: The gearbox has a high rigidity FC-25 cast iron casing. The gears are made of high-quality high-purity alloy steel 20CrMnTi carburized and quenched, and ground. The shaft is tempered alloy steel with high load-bearing capacity. It is equipped with a heavy load-bearing tapered roller bearing. The oil seal has a double lip seal, which has dustproof and oil leakage prevention capabilities.
·Performance Features: The T series spiral bevel gear steering gearbox is standardized and has many varieties. The speed ratio is all actual transmission ratios, with an average efficiency of 98%. It can run CZPT and reverse, with smooth low-speed or high-speed transmission, low noise, small vibration, and large bearing force.
RFQ
Q:What information should I tell you to confirm speed reducer?
A: Model/Size, Transmission Ratio, Shaft directions & Order quantity.
Q:What if I don’t know which gear reducer I need?
A:Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.
Q:What should I provide if I want to order NON-STANDERD speed reducers?
A: Drafts, Dimensions, Pictures and samples if possible.
Q:What is the MOQ?
A: It is OK for 1 or small pieces trial order for quality testing.
Q:How long should I wait for the feedback after I send the inquiry?
A: Within 6 hours
Q:What is the payment term?
A:You can pay via T/T(30% in advance+70% before delivery), L/C ,West Union etc
| Aplikasi: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Three-Step |
| Contoh: |
US$ 100/Piece
1 Buah (Minimum Pemesanan) | |
|---|
Frekuensi Pelumasan untuk Gearbox Mesin Pemotong Rumput
Frekuensi pelumasan gearbox mesin pemotong rumput Anda bergantung pada rekomendasi pabrikan, intensitas penggunaan, dan kondisi pengoperasian. Berikut beberapa panduan umum:
- Perawatan Rutin: Disarankan untuk melumasi gearbox mesin pemotong rumput Anda di awal musim pemotongan rumput atau setelah sekitar 25-50 jam pengoperasian.
- Penggunaan Berat: Jika Anda sering menggunakan mesin pemotong rumput atau dalam kondisi yang menantang seperti lingkungan berdebu atau basah, Anda mungkin perlu melumasinya lebih sering, mungkin setiap 10-20 jam pengoperasian.
- Periksa Manual: Konsultasikan buku panduan pengguna mesin pemotong rumput Anda untuk mengetahui interval pelumasan spesifik dan jenis pelumas yang harus digunakan. Mesin pemotong rumput dan gearbox yang berbeda mungkin memiliki persyaratan yang berbeda pula.
- Lakukan Pemeriksaan Secara Teratur: Perhatikan transmisi untuk setiap tanda kebocoran oli atau suara yang tidak biasa. Jika Anda menemukan masalah, sebaiknya periksa dan lumasi transmisi sesuai kebutuhan.
Menggunakan jenis pelumas yang tepat sangat penting untuk kinerja gearbox yang optimal. Pastikan untuk menggunakan oli pelumas berkualitas tinggi yang direkomendasikan oleh pabrikan. Selalu ikuti prosedur pelumasan yang tepat yang diuraikan dalam buku panduan pengguna untuk memastikan umur panjang dan efisiensi gearbox mesin pemotong rumput Anda.
Choosing the Right Mower Gearbox for Your Lawn Mower
Choosing the right mower gearbox for your lawn mower involves considering several important factors to ensure compatibility, performance, and longevity:
- Mower Type: Different types of mowers, such as rotary mowers, reel mowers, and flail mowers, may require specific gearbox designs. Choose a gearbox that matches your mower type.
- Power and Torque: Calculate the power and torque requirements of your mower to ensure the gearbox can handle the load without straining.
- Mounting Compatibility: Ensure the gearbox’s mounting points match those of your mower. Compatibility is essential for proper installation and function.
- Shaft Size and Type: Consider the size and type of shafts on both the gearbox and the mower to ensure they can be connected securely.
- Gear Ratio: Choose a gear ratio that provides the desired cutting or mowing speed for your specific application.
- Quality and Brand: Opt for a reputable brand known for producing high-quality gearboxes. Quality components contribute to durability and performance.
- Maintenance Requirements: Consider the maintenance needs of the gearbox and choose one that aligns with your willingness to perform regular maintenance.
- Budget: While quality is important, consider your budget and aim for the best quality gearbox that fits within your financial constraints.
Consult your mower’s manual or a professional for guidance on selecting the right gearbox for your specific mower model and application. Choosing the right gearbox ensures efficient operation and extends the lifespan of your lawn mower.
Function of a Mower Gearbox
A mower gearbox operates through a series of gears and components that work together to transmit power and convert the rotational motion of the engine into the cutting action of the blades. Here’s how a typical mower gearbox works:
- Power Input: The mower gearbox receives power from the mower’s engine via a drive shaft.
- Gear Reduction: The gearbox contains a set of gears that are arranged in specific ratios to achieve the required torque and speed conversion. The input gear, connected to the drive shaft, meshes with one or more intermediate gears.
- Torque Conversion: As the input gear turns, it drives the intermediate gears. The gear arrangement within the gearbox results in a reduction of speed and an increase in torque. This is essential for providing the cutting blades with the necessary force to cut through vegetation.
- Blade Connection: The output shaft of the gearbox is connected to the cutting blades. As the gearbox output shaft rotates, it transfers the torque to the blades, causing them to spin.
- Blade Rotation: The rotational motion of the blades is what enables them to cut through grass and other vegetation. The increased torque generated by the gearbox allows the blades to effectively perform cutting or mulching actions.
Modern mower gearboxes are designed for efficiency, durability, and precision. They are often equipped with ball bearings, seals, and lubrication to minimize friction and ensure smooth operation. Some mower gearboxes also include additional features such as adjustable cutting heights, blade synchronization, and directional control to enhance the versatility of the mower.
editor by CX 2023-09-07
