Industrial-Strength Power Harrow Gearbox — Reliable Power for Soil Cultivation
When soil cultivation efficiency is your priority, the gearbox connecting your tractor to the power harrow becomes the most critical component on the implement. Our agricultural gearbox for Power Harrow applications uses advanced gear technology to maximize power transfer while minimizing heat generation and mechanical wear. The power harrow gearbox distributes PTO torque across multiple vertical tine shafts via an internal gear train. Bolted to the harrow’s main beam, it ensures each set of tines counter-rotates to crumble clods without inverting the soil profile.
Didukung oleh kontrol kualitas yang ketat dan diuji di laboratorium sebelum pengiriman, setiap unit memenuhi standar ketat yang dituntut oleh petani profesional Australia yang tidak mampu menanggung kerusakan di tengah musim.
📊 Detailed Specifications — Power Harrow Agricultural Gearbox
Kita power harrow gearbox is manufactured to the following specifications. Custom engineering is available for non-standard soil cultivation applications.
| Parameter | Nilai |
|---|---|
| Kekerasan Inti Gigi | HRC 30 |
| Gear Surface Hardness | HRC 57 – 62 |
| Ambient Temperature Range | -20°C to +120°C |
| Sertifikasi Mutu | ISO 9001:2015 |
| Jenis Gigi Utama | Spiral Bevel Gears |
| Maximum Input Torque | 1000 Nm |
| Bantalan Utama | Needle Roller Bearings |
| Jenis Sumbat Pembuangan | Steker segi enam standar |
| Berat Bersih | 28 kg |
| Input Shaft Spline | 6-spline (1-3/8″) / 21-spline (1-3/4″) |
| Parameter | Nilai |
|---|---|
| Rentang Kecepatan Keluaran | 378 – 2038 RPM |
| Bahan Perumahan | Besi Grafit Bulat |
| Jenis Segel Poros | Ptfe Rotary Seal |
| Perlindungan Beban Berlebih | Torque limiter |
| Jumlah Tahap Gigi | 1 |
| Centre Distance | 140 mm |
| Sistem Pengecatan | 3-coat marine grade |
| Diameter Poros Keluaran | 40 mm |
| Torsi Kontinu Maksimum | 200 – 1000 Nm |
| Rasio Gigi yang Tersedia | 1:1.93 to 1:2.5 |
Hubungi kami tim teknik for a detailed specification sheet tailored to your power harrow model and soil cultivation conditions.
💰 Total Cost of Ownership — Power Harrow Gearbox Analysis
Before you buy a power harrow gearbox on price alone, consider these engineering facts about our Power Harrow Pilihan unit versus anggaran:
| Spesifikasi | Low-Cost Alternative | Our Engineered Power Harrow Gearbox |
|---|---|---|
| Kebisingan & Getaran | 85+ dB(A) — requires hearing protection | Rasio tumpang tindih heliks >1,5 menghilangkan beban pada satu gigi. |
| Sistem Penyegelan | Single-lip NBR rubber seal, no dust excluder | PTFE rotary seal + stainless wear sleeve for maximum chemical resistance |
| Desain Perumahan | Recycled aluminium casting with porosity issues | Spheroidal graphite iron (SG700), CNC-machined bearing bores, integrated cooling fins |
| Garansi & Dukungan | Garansi 12 bulan tidak termasuk seal dan bearing. | 24-month warranty backed by ISO 9001 and batch traceability |
| Expected Service Life | 500-1,000 hours — frequent replacement needed | 5,000-8,000 hours demonstrated in Australian commercial operations |
| Perlindungan Permukaan | No primer — surface rust within weeks | Cathodic e-coat + powder coat, 1000-hr salt spray test |
Petani yang beralih ke produk kami Power Harrow gearbox Laporan tersebut menyatakan bahwa investasi tersebut akan balik modal dalam musim pertama melalui penghapusan waktu henti dan pengurangan biaya perawatan. Kualitas adalah investasi, bukan pengeluaran.
🔧 Inside the Power Harrow Gearbox — Engineering Principles
Beginilah cara kami Power Harrow gearbox converts PTO output into productive soil cultivation power:
✅ Verified Replacements for Major Power Harrow Brands
Cross-reference data is provided as a customer service. All brand names and model numbers remain the intellectual property of their respective owners.
| Manufacturer | Interchange Reference | Fitment |
|---|---|---|
| Claas | Mk-IV, Model 1411, 914Z | ✅ |
| Kubota | Series 540, Mk-IV, A-347 | ✅ |
| Capello | Type 27D, Model 1750, G2.4 | ✅ |
| John Deere | Series 617, Mk-III, G1.4 | ✅ |
| Krone | G8.3, D-558, Mk-V | ✅ |
| Grimme | Mk-II, Model 8346, Type 22D | ✅ |
Parts & Service Support
- Bearing rebuild kits with spacers and shims
- Seal & gasket replacement kits
- Matched gear pairs — pinion and wheel
- Input and output shaft assemblies
📝 Step-by-Step: How to Select Your Power Harrow Gearbox
Sebelum memesan Power Harrow gearboxKonfirmasikan parameter-parameter penting ini untuk memastikan kesesuaian dan kinerja yang sempurna:
Jam Kerja per Musim
Estimate your annual operating hours for the power harrow to determine appropriate service life rating
Pengoperasian dengan jam kerja tinggi memerlukan spesifikasi bantalan dan roda gigi premium untuk biaya per jam terendah.
Permintaan Torsi
Calculate the peak torque your soil cultivation application generates — including shock loads from obstacles or material variations
Kotak roda gigi harus mampu menangani torsi puncak tanpa mengaktifkan perlindungan beban berlebih selama pengoperasian normal.
Pola Baut Pemasangan
Measure the bolt hole positions, centre distances, and overall envelope on your power harrow’s gearbox mounting flange
Memastikan pemasangan langsung tanpa perlu modifikasi atau pelat adaptor.
Lingkungan Operasi
Assess exposure to dust, moisture, chemicals, and temperature extremes in your typical soil cultivation conditions
Menentukan tingkat penyegelan yang sesuai, lapisan permukaan, dan spesifikasi material wadah.
Jenis Poros Keluaran
Identify the coupling type on your power harrow — keyed, splined, flanged, or hollow bore
Output yang tidak sesuai memerlukan adaptor penghubung yang mahal dan menimbulkan potensi titik kegagalan.
Arah Rotasi
Determine whether the tine drive on your power harrow requires clockwise or counter-clockwise output when viewed from the drive end
Arah putaran yang salah akan merusak alat atau tidak menghasilkan pekerjaan yang bermanfaat.
Kebutuhan Daya
Match the gearbox HP rating to your tractor’s PTO horsepower output and the power harrow’s demand
Kapasitas yang terlalu rendah menyebabkan panas berlebih dan kerusakan dini; kapasitas yang terlalu tinggi menambah biaya dan bobot yang tidak perlu.
💡 Tips Profesional: Not sure which model you need? Our selection engineers have cross-referenced thousands of power harrow gearbox applications. Send us any information you have — even partial — and we will find the right match. Hubungi kami di sini.
⚙ Fitting Guide: Power Harrow Gearbox on Your power harrow
Installing a new gearbox on your harrowing implement is a straightforward process when done methodically. Allow approximately 1-2 hours for a complete replacement using standard hand tools.
Separate the PTO driveline and the output connection to the tine drive. Mark the orientation of the gearbox on the frame before removal. Use an appropriate lifting device (the gearbox may be heavier than it looks). Remove mounting bolts working from the outside in, then gently pull the gearbox away from the mounting surface.
Oleskan lapisan tipis gemuk litium pada alur poros input. Aktifkan poros penggerak PTO, pastikan alur saling terkait sepenuhnya dan cincin pengaman terkunci pada posisinya. Periksa sudut poros penggerak: ukur dengan inklinometer jika memungkinkan. Sudut di atas 15° memerlukan peningkatan sambungan CV (constant velocity) untuk mencegah kerusakan akibat getaran.
Perform an initial low-speed test: engage PTO at half speed for 10 minutes, stop, check for leaks and abnormal heat. If clear, run at full speed for 20 minutes under light load. After the initial test, perform a short field trial under actual soil cultivation conditions at reduced forward speed. Monitor gearbox temperature and sound throughout.
Mate the gearbox output to the tine drive input. If using a flanged connection, align the bolt holes and use grade 8.8 or higher fasteners torqued to specification. If keyed or splined, confirm the coupling seats fully before applying locking hardware. Verify zero binding by hand-rotating the assembly.
Complete a first-service at 10 operating hours: retorque all fasteners, change the break-in oil and replace with fresh oil of the specified grade, inspect seals and breather, and confirm the tine drive connection remains tight. This early service removes any metallic particles generated during initial gear run-in.
Ensure the power harrow is fully supported and cannot roll or tip. Shut down the tractor, remove the key, and disconnect the battery if working near electrical components. Lower all hydraulic implements to the ground. Put on safety gloves, steel-cap boots, and eye protection before beginning any work.
Thoroughly clean the harrowing implement’s gearbox mating surface. Remove all rust, paint, and sealant residue. Inspect the mounting face for any damage — dents, cracks, or corrosion that could prevent a flush fit. If mounting studs are used, verify they are tight and undamaged.
⚠ Penting: Jika Anda mengalami kesulitan, tim dukungan teknis kami siap membantu Anda melalui proses tersebut — hubungi kami di sini.
🔧 Problem-Solving: Power Harrow Gearbox Field Issues
Diagnosis cepat menghemat waktu dan uang. Panduan pemecahan masalah ini disusun berdasarkan gejala — temukan masalah yang Anda alami, lalu ikuti tindakan yang disarankan untuk menyelesaikannya.
Remember: early intervention prevents secondary damage. If you detect any unusual behaviour from your Power Harrow gearbox, address it promptly rather than continuing to operate. Our tim teknis siap membantu mendiagnosis masalah dan mencari suku cadang pengganti dengan cepat.
📈 Engineer’s Field Notes — Power Harrow Gearbox Installations
Our agricultural gearboxes are field-proven across every Australian state and territory. Below are documented case studies from recent Power Harrow gearbox installations.
📍 Case #2: Armidale, NSW
| Pelanggan: | Ben Murdoch — broadacre cropping operation |
| Lokasi: | Armidale, NSW |
| Ukuran Ladang: | 4000 acres |
| Aplikasi: | Power Harrow gearbox for power harrow — soil cultivation |
| Alasan Pembelian: | Penggantian preventif terjadwal sebagai bagian dari program perawatan tahunan. |
“Opsi rasio khusus merupakan terobosan besar bagi operasional kami. Kami membutuhkan kecepatan output non-standar yang tidak dapat disediakan oleh pemasok lain. Tim teknik merancang solusi dalam waktu seminggu dan solusi tersebut bekerja dengan sempurna sejak hari pertama.”
— Ben Murdoch, Armidale, NSW
Paul Hutchinson — Cairns, QLD
Operasi: specialist power harrow operator | Ukuran: 3500 acres | Menggunakan: Power Harrow gearbox for soil cultivation
Alasan pembelian: Penggantian darurat di tengah musim setelah kerusakan parah pada gearbox asli.
“Fast delivery to a remote location was the initial reason I tried this supplier. The gearbox quality is what made me a repeat customer — we have now standardised on their products across our fleet of 8 power harrow machines.”
📍 Case #5: Rockhampton, QLD
| Pelanggan: | Barry Wilson — specialist power harrow operator |
| Lokasi: | Rockhampton, QLD |
| Ukuran Ladang: | 1800 acres |
| Aplikasi: | Power Harrow gearbox for power harrow — soil cultivation |
| Alasan Pembelian: | Pembuatan peralatan baru — menentukan gearbox aftermarket sebagai peningkatan OEM. |
“Our power harrow contractor business depends on zero downtime during the season. These gearboxes have given us that reliability. In 4 years of use across 11 machines, we have had exactly zero gearbox-related breakdowns.”
— Barry Wilson, Rockhampton, QLD
📚 Power Harrow Gearbox — Your Questions Answered
Can I return a gearbox if it does not fit my power harrow?
Jika Anda memberikan detail peralatan Anda sebelum memesan dan kami mengkonfirmasi kompatibilitas, pemasangan dijamin. Dalam kasus yang jarang terjadi, jika ada masalah kompatibilitas, kami menawarkan penukaran atau pengembalian dana tanpa pertanyaan untuk gearbox yang belum digunakan dalam waktu 30 hari setelah pengiriman. Tujuan kami adalah mencocokkan Anda dengan gearbox yang tepat pada pesanan pertama.
Can the output shaft be customized for my specific power harrow?
Absolutely. We manufacture gearboxes with keyed, splined, flanged, hex, and hollow-bore output shaft configurations. If your power harrow requires a non-standard output size, spline count, or connection type, our engineering team will design and machine it to your exact specifications at no additional lead time for common modifications.
How do I determine the correct gearbox model for my equipment?
Provide us with your tractor brand/model and PTO speed, the power harrow manufacturer and model, and the old gearbox part number if available. Alternatively, measure the input/output shaft dimensions and mounting bolt pattern. Our selection engineers will identify the correct match, typically within 24 hours.
Can the gearbox be serviced or rebuilt in the field?
Servis rutin (penggantian oli, penggantian seal, pemeriksaan bantalan) dapat dilakukan di tempat dengan peralatan standar. Untuk perbaikan besar, kami menyediakan kit perbaikan lengkap yang berisi semua bantalan, seal, dan gasket. Manual servis terperinci dan panduan video tersedia untuk diunduh dari portal dukungan kami.
Oli transmisi jenis apa yang Anda rekomendasikan untuk kondisi di Australia?
Untuk sebagian besar iklim Australia, oli gir SAE 80W-90 EP yang memenuhi spesifikasi GL-5 sangat ideal. Di daerah tropis dengan suhu tinggi yang berkelanjutan, kami merekomendasikan 85W-140. Untuk daerah selatan yang mengalami musim dingin yang sangat dingin, oli sintetis 75W-90 memberikan perlindungan start dingin yang lebih baik. Periksa kartu spesifikasi oli yang disertakan dengan girboks Anda untuk rekomendasi yang pasti.
Do you provide technical support after purchase?
Yes — every purchase includes access to our engineering support team for installation guidance, troubleshooting, maintenance advice, and parts ordering. Support is available via phone, email, and our online contact form. There is no charge for technical support during or after the warranty period.
Will this gearbox fit older-model power harrow equipment?
We maintain compatibility databases covering power harrow models from the past 25+ years. Most older models can be directly fitted with our current gearbox range. For discontinued or rare models, send us the mounting dimensions and shaft specifications, and we will confirm fitment or design a custom adapter.
What payment and ordering options do you offer?
We accept bank transfer, credit card, and purchase orders from established accounts. For large orders, we offer 30-day payment terms subject to credit approval. Orders can be placed through our website, by email, or by phone. Pro-forma invoices are available for pre-payment arrangements.
Apa saja yang tercakup dalam garansi dan berapa lama masa berlakunya?
Garansi komprehensif 24 bulan kami mencakup semua cacat material dan pengerjaan, termasuk bantalan, roda gigi, segel, dan rumah. Garansi ini berlaku sejak tanggal pembelian dan didukung oleh sistem manajemen mutu bersertifikasi ISO kami. Program garansi diperpanjang tersedia untuk pesanan dalam jumlah besar dan pesanan armada.
What is the expected lifespan under continuous soil cultivation operation?
Our Power Harrow gearbox is rated for 3,000 to 5,000+ operating hours with proper maintenance. Many customers in intensive Australian operations report achieving 5,000+ hours before requiring any internal service. Key factors affecting lifespan include oil change frequency, operating load, and environmental conditions.
⚡ Pair With These: Power Harrow Power Transmission Accessories
Maximize your soil cultivation equipment reliability with these complementary products designed to work with our Power Harrow gearbox.
-
PTO Shaft & Driveline for Power Harrow
Agricultural PTO shaft assemblies with shear-bolt or friction-clutch overload protection. Available in lengths from 600mm to 2500mm for any tractor-to-power harrow distance.
-
Koleksi Gearbox Pertanian
Browse our full range of agricultural gearboxes — from mower drives to harvester transmissions. Every unit built to the same premium standards as our Power Harrow gearbox.
📜 Australian Compliance & Regulations — Power Harrow Gearboxes
Compliance with Australian safety standards protects your workers and your business. The following standards and regulations apply to Power Harrow agricultural gearbox installations:
Regulatory Framework
AS 1636 — Agricultural Machinery Safety
AS 4024 — Pengamanan Mesin
State Workplace Safety Legislation
New South Wales — Work Health and Safety Regulation 2017
Western Australia — WHS (General) Regulations 2022
Northern Territory — WHS (National Uniform Legislation) Regulations 2011
Serving Every Agricultural Region in Australia
Kami mengantarkan Power Harrow agricultural gearboxes to every state and territory in Australia. Our logistics network covers major farming regions including the Wheatbelt, the Ord River district, and the Great Southern, the Wimmera, the Mallee, and Goulburn Valley, and the Katherine region, the Douglas Daly, and the Top End. Whether you operate in a metropolitan fringe area or a remote pastoral station, we ship directly to your property with full tracking and delivery confirmation.
🎯 Your Power Harrow Gearbox Journey Starts Here
Manufacturing Excellence — more than 20 years of Experience
We are a professional manufacturer of agricultural gearboxes and PTO drive systems. Our facility features:
- Automated heat treatment with atmosphere-controlled furnaces
- 24/7 production capability for urgent and large-volume orders
- CMM (Coordinate Measuring Machine) dimensional inspection
- Dedicated R&D team for custom and prototype gearbox development
Custom & Non-Standard Manufacturing
Our capabilities extend well beyond standard catalogue products. We design and build custom gear drives for power harrow OEMs, implement manufacturers, and agricultural engineers who need precise mechanical solutions that off-the-shelf products cannot deliver.
Send us your drawings, samples, or specifications — and receive a quotation within 24 hours.
Mitra terpercaya Anda untuk solusi gearbox pertanian — standar dan sesuai pesanan — di seluruh Australia dan dunia.
