Australian-Proven Sunflower Harvester Gearbox — Built for Harsh Field Conditions
A quality gearbox separates productive sunflower harvesting from costly downtime. Our Sunflower Harvester agricultural gearbox is the product of advanced metallurgy, precision manufacturing, and extensive field validation across diverse Australian farming environments. The sunflower header gearbox drives specialized pans, stalk choppers, and conveyors designed for sunflower heads. Mounted on the header frame, it provides the torque to cut thick sunflower stalks while gently conveying heads to the threshing system without seed loss.
Whether you are replacing a failed OEM unit or upgrading to a more durable solution, this gear drive offers drop-in compatibility with leading sunflower harvester brands and models — backed by engineering support from specification to installation.
📊 Detailed Specifications — Sunflower Harvester Agricultural Gearbox
私たちの sunflower harvester gearbox is manufactured to the following specifications. Custom engineering is available for non-standard sunflower harvesting applications.
| パラメータ | 価値 |
|---|---|
| Ambient Temperature Range | -20°C to +105°C |
| 正味重量 | 38 kg |
| Mounting Configuration | 4-bolt square |
| 石油生産能力 | 2.9 litres |
| 出力軸タイプ | Hex output |
| Rated Power Capacity | 18 – 120 HP (13-90 kW) |
| ハウジング材 | Spheroidal Graphite Iron |
| Drain Plug Type | Sight glass + drain combo |
| Maximum Continuous Torque | 120 – 400 Nm |
| 塗装システム | 2コート工業用 |
| パラメータ | 価値 |
|---|---|
| プライマリーギアタイプ | 平歯車 |
| Module / Diametral Pitch | M3 |
| 利用可能なギア比 | 1:1.47 to 1:2.5 |
| ベアリングの設計寿命（L10） | 5000 hours minimum |
| 反発 | ≤ 10 arc-minutes |
| 1mの距離での騒音 | ≤ 76 dB(A) |
| 潤滑方法 | Splash/bath |
| プライマリーベアリング | Tapered Roller Bearings |
| 過負荷保護 | Slip clutch |
| 出力軸径 | 30 mm |
お問い合わせ先 エンジニアリングチーム for a detailed specification sheet tailored to your sunflower harvester model and sunflower harvesting conditions.
💰 Total Cost of Ownership — Sunflower Harvester Gearbox Analysis
The table below documents measurable differences between our premium Sunflower Harvester gearbox and budget alternatives. Each advantage translates directly into reduced downtime:
| 仕様 | Low-Cost Alternative | Our Engineered Sunflower Harvester Gearbox |
|---|---|---|
| Expected Service Life | Unpredictable — many fail within first season | 4,000-6,000 hours MTBF (Mean Time Between Failures) |
| Spare Parts | No individual parts — must buy complete gearbox | Complete rebuild kits off-the-shelf |
| Operating Efficiency | 82-87% — high fuel consumption penalty | 96-98% — minimal heat generation, lower fuel costs |
| 住宅設計 | Recycled aluminium casting with porosity issues | FEA最適化された強化リブ付きダクタイル鋳鉄、肉厚は業界平均の2倍 |
| Gear Material & Treatment | Mild carbon steel with induction hardening | 18CrNiMo7-6 aerospace-grade steel, shot-peened root fillets for fatigue life |
| シーリングシステム | Single-lip NBR rubber seal, no dust excluder | Cassette-type metal-cased seal with integrated dirt rejection lip |
| 騒音と振動 | 50メートル離れた場所からでも聞こえる甲高い音 | Balanced rotating assembly, vibration below 2.5 mm/s RMS |
The numbers speak clearly: superior materials, tighter tolerances, and longer service life add up to a gearbox that costs less per operating hour than any alternative on the market. Get in touch to discuss your requirements.
⚙ From PTO to Header/Chopper Drive — Sunflower Harvester Gearbox Anatomy
Let us examine how the gearbox in a sunflower harvester operates:
| Subsystem | 関数 |
|---|---|
| PTO Input | Power enters through a precision-machined splined coupling accepting 540 RPM (1-3/8″) or 1000 RPM (1-3/4″) PTO output. The input shaft rides on deep groove ball bearings selected specifically for the load profile of sunflower harvesting applications. |
| Gear Reduction | Precision spur gears inside the gearbox reduce PTO speed while multiplying torque to match the header/chopper drive’s demands. The sunflower header gearbox drives specialized pans, stalk choppers, and conveyors designed for sunflower heads. Mounted on the header frame, it provides the torque to cut thick sunflower stalks while gently conveying heads to the threshing system without seed loss. The gears are manufactured from carburized alloy steel, ground to tight tolerances, and profiled for quiet, efficient power transfer. |
| Output Drive | Power exits through the output shaft connecting to the sunflower harvester’s header/chopper drive. The output configuration (keyed, splined, flanged, or hollow bore) matches the implement’s drive requirements. Smooth power flow to the header/chopper drive is maintained regardless of load fluctuations during sunflower harvesting. |
| Sealing & Lubrication | The spheroidal graphite iron housing acts as a heat sink with cooling fins for convective cooling. Internal splash lubrication with synthetic 75W-90 GL-5 ensures all surfaces maintain a protective oil film. Quad-Ring Seals at each shaft opening block contaminants while retaining lubricant. |
🔄 Brand Compatibility — Sunflower Harvester Gearbox Replacement Guide
ブランド名は、お客様が互換性のある交換用ギアボックスを特定する際の参考情報としてのみ提供されています。すべての商標はそれぞれの所有者に帰属します。
私たちの Sunflower Harvester gearbox directly replaces the factory gear drive on the following sunflower harvester brands:
J-760, G7.1
✅ Compatible
G7.7, Series 500
✅ Compatible
750S, Series 518
✅ Compatible
Mk-V, Type 10A
✅ Compatible
Series 652, G1.7
✅ Compatible
569X, Type 29K
✅ Compatible
Series 133, 872R
✅ Compatible
Rebuild Kits & Parts
📚 Selection Flowchart — Find Your Perfect Sunflower Harvester Gearbox
ご注文の前に Sunflower Harvester gearbox完璧な適合性と性能を確保するために、以下の重要なパラメータを確認してください。
既存のギアボックスの識別
交換するギアボックスの銘板に記載されているブランド、モデル番号、および部品番号を記録してください。
Speeds up the matching process and ensures dimensional compatibility with your sunflower harvesting machine
Working Hours per Season
Estimate your annual operating hours for the sunflower harvester to determine appropriate service life rating
High-hour operations justify premium bearing and gear specifications for lowest cost per hour
Operating Environment
Assess exposure to dust, moisture, chemicals, and temperature extremes in your typical sunflower harvesting conditions
Determines the appropriate seal grade, surface coating, and housing material specification
トルク要求
Calculate the peak torque your sunflower harvesting application generates — including shock loads from obstacles or material variations
ギアボックスは、通常運転時に過負荷保護を作動させることなく、最大トルクを処理できなければならない。
出力軸タイプ
Identify the coupling type on your sunflower harvester — keyed, splined, flanged, or hollow bore
出力の不一致は高価なアダプタカップリングを必要とし、潜在的な故障箇所を生み出す。
回転方向
Determine whether the header/chopper drive on your sunflower harvester requires clockwise or counter-clockwise output when viewed from the drive end
回転方向が間違っていると、作業機が損傷したり、有効な作業ができなかったりします。
Required header/chopper drive Speed
Refer to your sunflower harvester manufacturer’s manual for the recommended header/chopper drive operating speed
PTO速度と合わせて、ギアボックスに必要な正確なギア比を決定します。
💡 プロのヒント： Not sure which model you need? Our selection engineers have cross-referenced thousands of sunflower harvester gearbox applications. Send us any information you have — even partial — and we will find the right match. こちらからお問い合わせください.
📝 How to Install Your New Sunflower Harvester Agricultural Gearbox
This guide covers the complete process of replacing the gearbox on your sunflower harvester. Each step includes specific details for sunflower harvesting equipment — follow them in sequence for best results.
Step 1 — Connect Output to header/chopper drive
Connect the output coupling to the header/chopper drive drive on your sunflower harvester. Ensure the shaft engagement depth meets the minimum specified in the manual. Tighten all retaining hardware to the correct torque value. After connection, rotate the output by hand to verify smooth, unrestricted movement.
Step 2 — Fill With Lubricant
Add gear oil through the fill port. Use the grade recommended in the installation manual. Fill until oil just begins to weep from the level check hole (if provided) or reaches the bottom of the fill port. Wipe any spilled oil from the housing. Confirm the magnetic drain plug is fully seated.
Step 3 — Connect PTO Driveline
Slide the PTO driveline yoke over the gearbox input spline. Ensure full engagement — the yoke should slide past the retaining groove and click into place. Test the engagement by pulling firmly on the yoke; it should not detach. Verify that the driveline length allows adequate telescoping stroke throughout the full range of implement movement.
Step 4 — Remove Old Gearbox
Detach the driveline yoke from the gearbox input. If the gearbox also has an output coupling to the header/chopper drive, disconnect that as well. Support the gearbox from below with a hydraulic jack. Remove the mounting fasteners progressively, keeping at least two bolts finger-tight until you are ready to slide the unit out.
Step 5 — Position & Secure New Gearbox
With an assistant or hoist, position the new gearbox onto the sunflower harvester’s mounting flange. Align the locating dowels or pilot bore first, then insert the mounting bolts. Tighten in stages: first to 50% torque in a star pattern, then to 75%, then to full specification. Check for flush seating around the entire perimeter.
Step 6 — Test Run & Break-In
With the sunflower harvester raised or in a safe test position, start the PTO at idle speed. Observe the gearbox for any vibration, unusual noise, or oil seepage. Run for 20 minutes at reduced speed. If all is normal, increase to the operating PTO speed and run for an additional 10 minutes while monitoring temperature. Re-check all mountings.
Step 7 — Drain & Document Old Gearbox
Place a collection pan beneath the gearbox. Remove both the fill and drain plugs to speed drainage. While oil drains, photograph the gearbox nameplate, mounting arrangement, and driveline connection — these images are invaluable if questions arise during installation of the new unit.
⚠ 重要: For safety, never work under unsupported equipment. Use proper lifting devices when handling the gearbox unit.
🔧 Problem-Solving: Sunflower Harvester Gearbox Field Issues
Even the best-engineered gearbox may encounter operational issues over its service life. This guide covers the most common symptoms reported with sunflower harvester gearboxes and provides actionable field solutions.
⚠ PTOドライブラインとギアボックスの接続に問題があります
Likely cause: PTOヨークの係合面が損傷または摩耗している
What to do: Apply penetrating oil to the input splines and allow it to work for 5 minutes. Rotate the PTO driveline slightly while applying light pressure — the splines need to index before engaging. If the driveline yoke is worn, replace it before installation to prevent premature input bearing failure.
⚠ Abnormal Grinding or Whining Noise
Likely cause: Bearing wear or race damage
What to do: Check oil level immediately — low oil is the most common cause of gear noise in sunflower harvester gearboxes. If oil level is correct, the lubricant may have degraded — perform a complete oil change. Persistent noise indicates internal wear requiring professional assessment.
⚠ 運転中の過度の振動
Likely cause: 取り付けボルトが緩んでギアボックスが動く
What to do: Vibration in a sunflower harvester gearbox system usually originates from the driveline, not the gearbox itself. Inspect the PTO shaft U-joints — a worn joint creates a twice-per-revolution vibration pulse. Confirm the driveline is the correct length for the tractor-to-implement distance. Re-torque the gearbox mounting bolts.
⚠ Oil Leaking from Shaft Seals
Likely cause: Blocked breather vent preventing pressure relief
What to do: Inspect the breather cap — a blocked breather pressurizes the housing and forces oil past seals. Replace the breather and clean any debris. If leaking continues, replace the affected seal. Check the shaft surface under the seal for grooves or corrosion that may be cutting the seal lip.
⚠ギアボックスが過熱しています
Likely cause: ゴミが詰まった冷却フィンにより放熱性能が低下する
What to do: Measure housing temperature (normal operating range: 40-80°C depending on ambient temperature). If consistently above 90°C, verify oil volume, clean the housing, and check that the gear ratio produces the correct output speed. An incorrect ratio forces the gearbox to work harder, generating excess heat.
For persistent or complex issues, our engineers provide remote diagnostic support via phone and email. We can also supply rebuild kits for in-workshop repairs. Reach our support team here.
📈 Engineer’s Field Notes — Sunflower Harvester Gearbox Installations
Our agricultural gearboxes are field-proven across every Australian state and territory. Below are documented case studies from recent Sunflower Harvester gearbox installations.
Noel Dunn — Dubbo, NSW
手術： contract harvesting business | サイズ： 2000 acres | 使用： Sunflower Harvester gearbox for sunflower harvesting
購入理由： Scheduled preventive replacement as part of an annual maintenance program
「カスタム比率オプションは、当社の事業運営にとって画期的なものでした。他社では提供できない、標準外の出力速度が必要だったのですが、エンジニアリングチームが1週間以内に解決策を設計してくれ、初日から完璧に機能しました。」
📍 Case #3: Broome, WA
| お客様： | Robert Clarke — large-scale pastoral property |
| 位置： | Broome, WA |
| 農場規模： | 3500 acres |
| 応用： | Sunflower Harvester gearbox for sunflower harvester — sunflower harvesting |
| 購入理由： | Fleet standardisation — transitioning all sunflower harvester equipment to a single gearbox supplier |
“The technical support was exceptional. They asked detailed questions about our setup, recommended the correct model and ratio, and followed up after installation to confirm everything was operating correctly. That level of service is rare.”
— Robert Clarke, Broome, WA
Liam Byrne — Tamworth, NSW
手術： broadacre cropping operation | サイズ： 5000 acres | 使用： Sunflower Harvester gearbox for sunflower harvesting
購入理由： Replace failed OEM gearbox to restore sunflower harvester for the upcoming season
“We operate in a region with heavy red soil and corrosion has been a persistent problem with gearboxes. The coating on this unit is noticeably more robust — no rust after 2 full seasons of outdoor storage.”
📚 Sunflower Harvester Gearbox — Your Questions Answered
Q1: Can I return a gearbox if it does not fit my sunflower harvester?
ご注文前に機器の詳細をご提供いただき、弊社で互換性を確認させていただければ、適合は保証いたします。万が一、互換性の問題が発生した場合は、お届け後30日以内であれば、未使用のギアボックスを無条件で交換または返金いたします。弊社は、初回のご注文で最適なギアボックスをお届けすることを目指しております。
Q2: Will this gearbox fit older-model sunflower harvester equipment?
We maintain compatibility databases covering sunflower harvester models from the past 25+ years. Most older models can be directly fitted with our current gearbox range. For discontinued or rare models, send us the mounting dimensions and shaft specifications, and we will confirm fitment or design a custom adapter.
Q3: Can this gearbox withstand the shock loads generated during sunflower harvesting?
The gearbox is specifically designed for the dynamic and impact loading characteristic of sunflower harvesting applications. Case-hardened alloy steel gears absorb repetitive shocks, while the optional overload protection (shear bolt or slip clutch) safeguards against catastrophic overload events. The bearing selection and housing rigidity are both matched to sunflower harvester load profiles.
Q4: Do you provide technical support after purchase?
Yes — every purchase includes access to our engineering support team for installation guidance, troubleshooting, maintenance advice, and parts ordering. Support is available via phone, email, and our online contact form. There is no charge for technical support during or after the warranty period.
Q5: Can the output shaft be customized for my specific sunflower harvester?
Absolutely. We manufacture gearboxes with keyed, splined, flanged, hex, and hollow-bore output shaft configurations. If your sunflower harvester requires a non-standard output size, spline count, or connection type, our engineering team will design and machine it to your exact specifications at no additional lead time for common modifications.
Q6: How is the gearbox packaged for shipping?
Each gearbox is drained of shipping oil, wrapped in VCI (Vapor Corrosion Inhibitor) film, and crated in a sturdy plywood box rated for international freight. This packaging protects against moisture, impact, and corrosion during transit — even for shipments to remote Australian properties via road freight.
Q7: Which gear oil do you recommend for Australian conditions?
For most Australian climates, SAE 80W-90 EP gear oil meeting GL-5 specification is ideal. In tropical regions with sustained high temperatures, we recommend 85W-140. For southern regions experiencing cold winters, synthetic 75W-90 provides better cold-start protection. Check the oil specification card shipped with your gearbox for the definitive recommendation.
Q8: How does your gearbox compare to the original OEM unit?
当社のギアボックスは、測定可能なすべてのパラメータにおいて、純正品と同等またはそれ以上の性能を発揮します。主な改良点としては、ベアリングクラスのアップグレード、優れたシール材の使用、放熱性能の向上、そして純正品カタログにはないカスタムギア比のオプションなどが挙げられます。その結果、純正品と交換するだけで、通常は純正品よりも長持ちする製品が実現しました。
Q9: How do I determine the correct gearbox model for my equipment?
Provide us with your tractor brand/model and PTO speed, the sunflower harvester manufacturer and model, and the old gearbox part number if available. Alternatively, measure the input/output shaft dimensions and mounting bolt pattern. Our selection engineers will identify the correct match, typically within 24 hours.
Q10: What gear ratios are available for the sunflower harvester gearbox?
We offer a comprehensive range of ratios from 1:1 through 1:6 to match virtually any sunflower harvester configuration. Standard catalogue ratios ship within days; custom ratios can be manufactured within 2-3 weeks. Our engineers will recommend the optimal ratio based on your tractor PTO speed and sunflower harvesting requirements.
⚡ Pair With These: Sunflower Harvester Power Transmission Accessories
These products are frequently purchased alongside our Sunflower Harvester gearbox by Australian farmers optimizing their sunflower harvesting equipment.
PTO Driveline ComponentsHeavy-duty PTO driveline assemblies featuring precision cross journals, integrated guard tubes, and multi-spline connections compatible with our Sunflower Harvester gearbox. |
Agricultural Gearbox CollectionWe manufacture gearboxes for over 50 different implement types. Explore our range for consistent quality across all your agricultural equipment needs. |
⚖ Australian Standards & Sunflower Harvester Gearbox Compliance
Compliance with Australian safety standards protects your workers and your business. The following standards and regulations apply to Sunflower Harvester agricultural gearbox installations:
Standards Compliance
| Standard | Relevance |
|---|---|
| ISO 6336 — Gear Load Capacity | All gears rated and verified per international standards for tooth root fatigue and surface durability. |
| AS/NZS ISO 9001:2015 — Quality Management | Our manufacturing facility holds current certification to the international quality management standard. |
| Safe Work Australia PTO Safety Guidelines | All PTO-driven sunflower harvester equipment must incorporate compliant shaft guarding. Guard-compatible drivelines available. |
State-Level WHS Requirements
- Northern Territory — WHS (National Uniform Legislation) Regulations 2011: applies federal standards to sunflower harvesting operations territory-wide.
- Victoria — OHS Regulations 2017: specifies risk assessment requirements for sunflower harvesting machinery operations.
- Western Australia — WHS (General) Regulations 2022: includes obligations for remote farm operations involving sunflower harvesting equipment.
Nationwide Delivery — From Metro to Remote
We deliver Sunflower Harvester agricultural gearboxes to every state and territory in Australia. Our logistics network covers major farming regions including the North West Slopes, Hunter Valley, and Central West NSW, the Darling Downs, the Lockyer Valley, and the Burnett region, and the Wimmera, the Mallee, and Goulburn Valley. Whether you operate in a metropolitan fringe area or a remote pastoral station, we ship directly to your property with full tracking and delivery confirmation.
🚨 Upgrade Your Sunflower Harvester — Talk to Our Engineers
25+ Manufacturing Heritage
Producing 120,000+ agricultural gearboxes annually for customers in 60+ countries. Key capabilities: dynamic gearbox testing on calibrated absorption dynamometers, 24/7 production capability for urgent and large-volume orders, automated heat treatment with atmosphere-controlled furnaces.
We welcome custom orders: Need something different? We manufacture non-standard agricultural gearboxes to customer specifications daily. Modified ratios, custom housings, special shaft configurations, unique mounting patterns — if you can define it, we can build it.
Your trusted partner for agricultural gearbox solutions — standard and custom — across Australia and worldwide.
