EP01-672 Lawn Mower Gearbox

EP01-672 Lawn Mower Gearbox

The EP01-672 is a 50 HP medium-duty gearbox offering 1.92:1 and 1.47:1 ratios with optic-axis output. Mid-size farming co-operatives and rental equipment depots value its combination of moderate weight (18.5 kg), proven durability, and broad ratio coverage for general-purpose rotary mowing applications.

SKU: faf46e25c058 Category: Tags: , , , ,

Description


EP01-672 — Engineered for Australian & Global Farming Conditions

The EP01-672 from Ever-power Australia Mower Gearbox Co.,Ltd. is a field-proven right-angle gearbox built for rotary mower and brush cutter applications. Its 50馬力 capacity and hardened bevel gears keep your operation running efficiently from dawn to dusk, season after season.

EP01-672 Medium-Duty Rotary Cutter Gearbox

📈 EP01-672 Technical Specifications

パラメータ 仕様
型番 EP01-672
ギアボックスタイプ Medium-Duty Rotary Cutter Gearbox
ギア比 1.92:1 / 1.47:1
歯の形状 23/12, 22/15
ギアモジュール 5.5 / 5.65
定格電力 50馬力
入力速度 540回転/分
入力/出力シャフト 1 3/8 Z6 / Optic axis
正味重量 18.5 Kg
ギア素材 20CrMnTi合金鋼、浸炭焼入れ済み、硬度HRC 58-62
ハウジング材 ねずみ鋳鉄（HT200/HT250）
シール保護 マルチリップNBR/FKMオイルシール、IP65+規格準拠
潤滑 SAE 80W-90または85W-140 EPギアオイル
表面処理 Eコートプライマー＋ポリエステル粉体塗装、赤色仕上げ

⭐ 主な特長とエンジニアリング上の利点

🌡

Interference-Fit Bearing Installation

All bearings installed with controlled interference fit using induction heating, preventing the spinning-in-bore failures common in slip-fit assemblies.

🛠

Hardened Shift Fork Mechanism

For multi-ratio models: induction-hardened shift fork and detent system provides positive gear engagement with tactile confirmation, preventing half-engagement damage.

🔬

Hot-Dip Galvanized Mounting Hardware

Grade 10.9 mounting bolts hot-dip galvanized to AS/NZS 4680, resisting corrosion in coastal and high-humidity farming regions like northern Queensland and Waikato.

⚖

Field-Rebuildable Modular Design

All internal components — gears, bearings, seals, shafts — are individually replaceable in the field with standard hand tools, eliminating the need to send units away for factory rebuild.

🚀

Dual-Lip NBR Oil Seals

Twin-lip nitrile seals with integrated dust excluder on every shaft exit, rated to IP65, preventing moisture and crop debris from entering the gear chamber.

💪

Optimized Lightweight Geometry

Finite-element-optimized casing walls remove unnecessary material while maintaining full load capacity, reducing installed weight by 15% versus previous-generation housings.

農業用芝刈り機のギアボックス

🔧 機器の互換性と相互参照

🔄 Cross-Reference Compatibility for EP01-672

The EP01-672 is engineered as a direct replacement or upgrade for gearboxes fitted to equipment from leading manufacturers including:

Rhino • LS Tractor • Fella • Sonalika • Branson • Dongfeng • John Deere • AGCO

免責事項：上記のブランド名は、互換性確認のためのみに記載されています。Ever-power Australia Mower Gearbox Co.,Ltd.は、記載されているメーカーとは一切提携、承認、または認可を受けていません。すべての商標は、それぞれの所有者に帰属します。

📚 ギアボックス選定ガイド

The correct gearbox specification depends on your tractor, implement, and field conditions. Evaluate these factors for the EP01-672:

📌 標準カタログ vs カスタム仕様
The EP01-672 is available as a standard catalog item shipping in 3-5 days. If your application requires a non-standard ratio, shaft type, or mounting configuration, our engineering team offers custom designs with 4-6 week lead times. Minimum order quantities may apply.
📌出力軸タイプの互換性
The EP01-672 features 1 3/8 Z6 / Optic axis output. Verify your blade hub or implement rotor accepts this shaft type before ordering. We offer multiple output configurations — spline, taper, keyway, and flange — to match virtually any existing installation.
📌重量と取り付けに関する考慮事項
At 18.5 Kg, the EP01-672 is designed for mid-size utility tractor attachments. Confirm your implement frame and three-point hitch can support this weight plus the weight of the blade assembly. Mounting bolt pattern and orientation should match your existing layout.
📌 ギア比とブレード先端速度のマッチング
For the EP01-672 with ratio(s) 1.92:1 / 1.47:1, calculate your required blade tip speed: typically 4,500-5,500 m/min for standard rotary cutters, 3,000-4,000 m/min for heavy brush cutting, and 5,500-6,500 m/min for fine finish mowing. Output RPM = PTO RPM ÷ ratio. Multiply by blade diameter to get tip speed.
📌トラクターPTO馬力に対する出力定格の選定
The EP01-672 is rated at 50 HP. Always select a gearbox rated at or above your tractor’s maximum PTO horsepower. For shock-load applications (mulching, brush clearing), add a 25-30% safety margin: a 60 HP tractor should use a 75+ HP rated gearbox.

🌾 一般的なアプリケーションシナリオ

🌾 Municipal park and recreational reserve mowing

🚘 Silage paddock management and pasture renovation

🌱 Construction site vegetation clearing and preparation

⛰ Roadside and highway verge vegetation management

🌳 Pipeline and powerline easement clearing

エバーパワー・オーストラリア・モアギアボックス株式会社の製造施設

🛠 インストールとセットアップガイド

  1. 作業機を持ち上げ、ブレードが地面から離れている状態で、PTOを低速アイドル回転で作動させます。異音がないか、振動やオイル漏れがないかを確認してください。
  2. 3点ヒッチが故障した場合にギアボックスが地面に接触しないよう、芝刈り機の作業装置安全チェーンまたは拘束装置が正しく接続されていることを確認してください。
  3. 新しいギアボックスにプレカットガスケットが付属していない場合は、取り付けフランジ面にRTVシリコンシーラントを薄く均一に塗布してください。
  4. PTO駆動シャフトをギアボックスの入力スプラインに接続します。シャフトを完全に押し込み、3点ヒッチの全可動範囲にわたってスムーズに伸縮することを確認してください。
  5. 最初の10時間の運転後、すべての取り付けボルトを規定トルクで締め直し、オイルレベルを確認してください。50時間後に最初のオイル交換と補充を行ってください。
  6. ギアボックスの取り付け作業を開始する前に、トラクターのPTOシャフトを外し、芝刈り機をジャッキスタンドまたはブロックで安全に支えてください。
  7. 重量が25kgを超えるユニットの場合は、チェーンホイスト、エンジンクレーン、または2人作業用のリフトを使用してギアボックスを設置してください。重いギアボックスを一人で持ち上げようとしないでください。

❓よくある質問

❓ What gear oil specification does this gearbox require?

Use SAE 80W-90 or SAE 85W-140 GL-5 extreme-pressure gear oil under normal conditions. For sub-zero climates below -20 °C, a synthetic 75W-90 ensures proper cold-start flow. Always check the sight glass or dipstick before each shift.

❓ Which tractor brands are compatible?

Our gearboxes use standard PTO connections (1 3/8″ 6-spline or 1 3/4″ 20-spline) compatible with virtually every brand — John Deere, Kubota, Massey Ferguson, New Holland, Case IH, Kioti, Mahindra, and more.

❓ How noisy is this gearbox during operation?

Our spiral bevel designs produce 72-78 dB(A) at 1 metre under rated load — significantly quieter than straight-bevel alternatives (typically 82-88 dB). Operators notice a meaningful reduction in gear whine.

❓ What is the difference between ratio options?

Ratio determines the speed/torque trade-off at the output. 1:1 maintains PTO speed (high blade RPM); 1:1.93 nearly halves output speed while doubling torque. Choose based on your target blade tip speed and vegetation density.

❓ What is the lead time for standard models?

In-stock standard models ship within 3-5 business days. For models requiring custom ratios or configurations, typical lead time is 4-6 weeks. Rush production is available for urgent requirements.

⭐ お客様の声と現場レポート

★★★★★

📍 Queensland, Australia

Installed on our mulching mower for sugarcane/crop field work. Oil seal quality is excellent — no leakage despite dusty and humid conditions.

★★★★★

📍 Adana, Turkey

We run these on roadside mowing in high-temperature conditions. Absolutely no overheating after 600+ hours. Thermals are well managed.

★★★★★

📍 Saskatchewan, Canada

Perfect for our orchard floor management. The compact design fits between rows with room to spare. Very reliable day-to-day operation.

★★★★☆

📍 日本、北海道

Good quality for the price. Our crew runs these gearboxes hard and they hold up better than previous brands we have tried.

★★★★☆

📍 スペイン、カスティーリャ地方

We fitted six of these across our fleet. Every single unit has performed flawlessly through two complete cutting seasons.

農業用ギアボックスシリーズ

⚖ EP01-672 vs. Low-Cost Alternatives

特徴 EP01-672 (Ever-power) ジェネリック／低価格代替品
出力フランジ ✔ 鍛造鋼、熱処理済み、硬度HRC 28-32 ✘鋳鉄製、未処理、ひび割れしやすい
ギア素材 ✔ 20CrMnTi鍛造合金鋼、浸炭処理済み、HRC 58-62 ✘ 45#炭素鋼、表面硬化処理済み、HRC 40-45
保証 ✔ 12ヶ月間のメーカー保証 ✘ 3～6ヶ月間の限定保証
アザラシの寿命 ✔ FKM/Viton Seals, 2000+ Hour Service Life ✘ NBR Seals, 500-800 Hours Before Leaking
Breather ✔ Labyrinth Stainless Steel Breather Valve ✘ Simple Open Vent Hole, Allows Water Entry
Gear Forging Method ✔ Closed-Die Forged, Grain-Flow Aligned ✘ Open-Die Forged or Cast, Weak Grain Structure
冷却設計 ✔ 機械加工された外部冷却フィン、35% より広い面積 ✘ 滑らかな筐体、放熱不良

🔄関連商品・アクセサリー

🏆 認証と品質基準

Quality assurance is embedded in every step of EP01-672 production, certified to ISO 9001:2015 standards. All forged gear blanks are ultrasonically inspected per ASTM A388 to ensure zero internal defects. Finished gears are checked on Gleason analyzers for profile, lead, pitch, and runout accuracy. Each assembled unit is run-tested at rated speed before release.

🏭 Ever-power Australia Mower Gearbox Co.,Ltd.を選ぶ理由とは？

Ever-power Australia Mower Gearbox Co.,Ltd. was founded with a simple mission: give farmers worldwide access to durable, fairly priced power transmission components. Today, our vertically integrated operation — from raw steel procurement to finished-product testing — processes over 5500 tonnes of alloy steel annually. Our ISO 9001:2015-certified factory employs 330 skilled technicians and engineers, each contributing to our industry-leading 98.5% on-time delivery rate and less than 0.3% field return rate.

PTO駆動シャフト

📞 Get Your EP01-672 Quote Today

Whether you need a single EP01-672 replacement or a container load for your production line, we deliver. Reach out to our sales team for volume pricing and priority lead times.

見積もりを依頼する全商品を見る

Related products