Kotak Gear Pemotong Rumput EP-RC81

Kotak Gear Pemotong Rumput EP-RC81

Rated at 80 HP with 600 RPM input compatibility, the EP-RC81 bridges the gap between standard and heavy-duty mowing. Cattle ranch operators and council vegetation teams appreciate its dual 1:1.93/1:1.46 ratio options and taper-spline output for fast blade assembly changes in the field.

SKU: d2b056b60265 Kategori: Teg: , , , ,

Penerangan


EP-RC81 — The Operator’s Choice in Heavy-Duty Rotary Cutter Gearbox Technology

Trusted by professional farmers and contractors worldwide, the EP-RC81 kotak gear mesin pemotong rumput combines 80 HP capacity with robust 28.7 Kg cast construction. Available in 1:1.93 / 1:1.46 ratio configurations, it adapts to your mowing conditions with ease.

EP-RC81 Heavy-Duty Rotary Cutter Gearbox

📈 EP-RC81 Technical Specifications

Parameter Spesifikasi
Nombor Model EP-RC81
Jenis Kotak Gear Heavy-Duty Rotary Cutter Gearbox
Nisbah Gear 1:1.93 / 1:1.46
Konfigurasi Gigi 27/14, 19/13
Modul Gear 5.5 / 7.0
Kuasa Dinilai 80 HP
Kelajuan Input 600 rpm
Aci Input/Output 1 3/8 Z6, Taper spline
Berat Bersih 28.7 Kg
Bahan Gear Keluli Aloi 20CrMnTi, Dikarburisasi & Diperkeras HRC 58-62
Bahan Perumahan Besi Tuang Mulur (QT450-10)
Perlindungan Meterai Meterai Minyak NBR/FKM Berbilang Bibir, Dinilai IP65+
Pelinciran Minyak Gear SAE 80W-90 atau 85W-140 EP
Rawatan Permukaan Primer E-Coat + Salutan Serbuk Poliester, Kemasan Merah

⭐ Ciri-ciri Utama & Kelebihan Kejuruteraan

🔨

Triple-Stage Shaft Sealing

Inner labyrinth + double-lip FKM seal + external V-ring slinger form a three-barrier defense against water, mud, and fine dust penetrating to the bearing cavities.

🌡

Integrated External Cooling Fins

35% additional surface area from machined cooling ribs accelerates heat rejection, keeping oil temperature below 80 °C during sustained full-load summer mowing.

🛠

18CrNiMo7-6 Aerospace Gear Steel

Vacuum-carburized gears from aircraft-grade alloy achieve HRC 60-63 surface and a tough pearlitic core, meeting AGMA Class 10 tooth accuracy standards.

🔬

98%+ Power Delivery Efficiency

Mirror-polished flanks (Ra ≤ 0.4 μm) and AGMA Class 11 accuracy virtually eliminate parasitic losses, ensuring every horsepower reaches the cutting blade.

⚖

4140 Chrome-Moly Output Flange

Forged steel output flange heat-treated to HRC 28-32, drilled for heavy-duty blade carriers up to 50 kg — eliminating the flex found in cast alternatives.

🚀

GGG-60 Heavy-Plate Housing

EN-GJS-600-3 ductile iron with 18 mm walls and FEA-optimized ribbing, engineered for sustained 150+ HP loads without measurable housing flex.

Kotak gear pemotong rumput dalam kegunaan pertanian

🔧 Keserasian & Rujukan Silang Peralatan

🔄 Cross-Reference Compatibility for EP-RC81

The EP-RC81 is engineered as a direct replacement or upgrade for gearboxes fitted to equipment from leading manufacturers including:

LS Tractor • Fella • Sonalika • Branson • Dongfeng • John Deere • AGCO • Rhino

Penafian: Nama jenama di atas dirujuk semata-mata untuk pengenalpastian keserasian. Ever-power Australia Mower Gearbox Co.,Ltd. tidak bergabung dengan, disokong oleh atau dibenarkan oleh mana-mana pengeluar tersenarai. Semua tanda dagangan adalah milik pemilik masing-masing.

📚 Panduan Pemilihan Kotak Gear

Getting gearbox selection right the first time saves money and headaches. Here is a systematic approach to specifying the EP-RC81:

📌 Perumah Besi Tuang vs Perumah Aluminium
The EP-RC81 uses a ductile cast iron housing. Cast iron excels in vibration damping, impact resistance, and heat dissipation — ideal for rough, rocky mowing conditions. Aluminium is lighter and more corrosion-resistant, better suited to wet environments and weight-sensitive implements.
📌 Katalog Standard vs Spesifikasi Tersuai
The EP-RC81 is available as a standard catalog item shipping in 3-5 days. If your application requires a non-standard ratio, shaft type, or mounting configuration, our engineering team offers custom designs with 4-6 week lead times. Minimum order quantities may apply.
📌 Keserasian Jenis Aci Output
The EP-RC81 features 1 3/8 Z6, Taper spline output. Verify your blade hub or implement rotor accepts this shaft type before ordering. We offer multiple output configurations — spline, taper, keyway, and flange — to match virtually any existing installation.
📌 Pertimbangan Berat dan Pemasangan
At 28.7 Kg, the EP-RC81 is designed for large-frame tractor implements and heavy-duty mowers. Confirm your implement frame and three-point hitch can support this weight plus the weight of the blade assembly. Mounting bolt pattern and orientation should match your existing layout.
📌 Matching Gear Ratio to Blade Tip Speed
For the EP-RC81 with ratio(s) 1:1.93 / 1:1.46, calculate your required blade tip speed: typically 4,500-5,500 m/min for standard rotary cutters, 3,000-4,000 m/min for heavy brush cutting, and 5,500-6,500 m/min for fine finish mowing. Output RPM = PTO RPM ÷ ratio. Multiply by blade diameter to get tip speed.

🌾 Senario Aplikasi Lazim

🌾 Municipal park and recreational reserve mowing

🚘 Silage paddock management and pasture renovation

🌱 Construction site vegetation clearing and preparation

⛰ Roadside and highway verge vegetation management

🌳 Pipeline and powerline easement clearing

Kemudahan pengeluaran Ever-power Australia Mower Gearbox Co.,Ltd.

🛠 Panduan Pemasangan & Persediaan

  1. Position the gearbox onto the mounting studs or bolt holes, verifying the input shaft faces the tractor PTO and the output shaft aligns with the blade hub or rotor.
  2. Ensure the PTO shaft has at least 50% spline overlap in all operating positions. Inadequate overlap causes rapid spline wear and potential shaft separation.
  3. Record the installation date, tractor hour meter reading, and gearbox serial number in your maintenance log for warranty and service interval tracking.
  4. If replacing an existing unit, drain the old oil completely, remove mounting fasteners, and carefully lower the old gearbox. Photograph the orientation and note any shim washers used.
  5. Insert all mounting bolts finger-tight first, then torque to specification in a cross (star) pattern to ensure even clamping. Typical torque: 80-120 Nm depending on bolt size.
  6. With the implement raised and blades clear of the ground, engage the PTO at low idle speed. Listen for any unusual noise and observe for vibration or oil leaks.
  7. Verify that the mower implement safety chain or restraint is properly connected to prevent the gearbox from contacting the ground if the three-point hitch fails.

❓ Soalan Lazim

❓ How do I select the right gear ratio?

Match the ratio to your blade tip speed target. Lower ratios (e.g. 1:1) give higher blade RPM for finish mowing; higher ratios (e.g. 1:1.93 or above) trade speed for torque, ideal for thick brush. Calculate: output RPM = input RPM ÷ ratio.

❓ What is the expected operational lifespan?

With proper maintenance, our gearboxes typically deliver 3,000 to 5,000 operating hours. Many units in the field have exceeded 6,000 hours. Lifespan depends on operating load, maintenance compliance, and field conditions.

❓ Is this suitable for mulching applications?

Yes. Our gearboxes are widely used on mulching mowers and brush cutters. For mulching, select a model rated 25-30% above your actual PTO horsepower to provide a safety margin against the intermittent shock loads typical of mulching.

❓ What quality inspections do you perform?

Every gearbox undergoes 100% dimensional inspection (CMM), gear tooth geometry verification (Gleason analyzer), hardness testing, oil-leak testing, and no-load run-in testing before shipment.

❓ What warranty do you provide?

Every gearbox ships with a 12-month warranty covering material and workmanship defects under normal operating conditions. Warranty claims are handled through our dealer network with replacement units dispatched within 48 hours of approval.

⭐ Ulasan Pelanggan & Laporan Lapangan

★★★★★

📍 South Australia, Australia

Kami menyelenggara lebih 40 mesin pemotong rumput untuk kontrak majlis. Beralih kepada jenama ini telah mengurangkan kadar kegagalan kotak gear kami sebanyak lebih 60 peratus.

★★★★★

📍 Konya, Turkey

Berjalan dalam musim sejuk yang melampau (-25 °C) dan musim panas yang panas. Minyak sintetik dalam kotak gear ini mengendalikan kedua-dua keadaan ekstrem tanpa masalah.

★★★★★

📍 Iowa, United States

Kami telah menggantikan tiga kotak gear OEM dengan model ini di seluruh armada kami. Kualiti gear dan prestasi pengedapnya jauh lebih baik. Sedang membuat pesanan semula untuk musim hadapan.

★★★★☆

📍 Faisalabad, Pakistan

Third year of heavy use on our orchard floor management. Still going strong with just regular oil changes. The best aftermarket gearbox I have found.

★★★★☆

📍 Poltava, Ukraine

Good gearbox with a solid, hefty feel. Delivery to Ukraine was fast. Only needed a small spacer washer to fit our older mower model.

Julat kotak gear pertanian

⚖ EP-RC81 vs. Low-Cost Alternatives

Ciri EP-RC81 (Ever-power) Alternatif Generik / Kos Rendah
Warranty ✔ 12-Month Full Manufacturer Warranty ✘ 3-6 Month Limited Warranty
Seal Longevity ✔ FKM/Viton Seals, 2000+ Hour Service Life ✘ NBR Seals, 500-800 Hours Before Leaking
Breather ✔ Labyrinth Stainless Steel Breather Valve ✘ Simple Open Vent Hole, Allows Water Entry
Gear Forging Method ✔ Closed-Die Forged, Grain-Flow Aligned ✘ Open-Die Forged or Cast, Weak Grain Structure
Cooling Design ✔ Machined External Cooling Fins, 35% More Area ✘ Smooth Housing, Poor Heat Dissipation
Output Flange ✔ Forged Steel, Heat-Treated HRC 28-32 ✘ Cast Iron, Untreated, Prone to Cracking
Bahan Gear ✔ 20CrMnTi Forged Alloy Steel, Carburized HRC 58-62 ✘ 45# Carbon Steel, Surface Hardened HRC 40-45

🔄 Produk & Aksesori Berkaitan

🏆 Pensijilan & Piawaian Kualiti

Our production of the EP-RC81 follows ISO 9001:2015 requirements with additional internal standards that exceed baseline certification. Key processes include: 100% CMM dimensional verification, Vickers hardness mapping on every gear, hydrostatic housing leak test at 1.5× rated pressure, and a 15-minute no-load run-in test. Test reports accompany every shipment.

🏭 Mengapa Memilih Ever-power Australia Mower Gearbox Co.,Ltd.?

What sets Ever-power Australia Mower Gearbox Co.,Ltd. apart is our ability to scale seamlessly from engineering support for a single unique application to mass production of 50000+ units per year without any compromise in quality. Our 13 gear production lines, climate-controlled metrology lab, and experienced technical sales team work together to make your sourcing process as efficient as your fieldwork needs to be.

Aci pemacu PTO

📞 Get Your EP-RC81 Quote Today

Stop losing field time to gearbox failures. The EP-RC81 is built to run all season without skipping a beat. Talk to our specialists about the right configuration for your operation.

Minta Sebut HargaLayari Semua Produk

Produk berkaitan