Product Description
Agricultural CZPT ry Parts Side Delivery Rake Gearbox
The gearbox is a designed to alter the output speed of your tractors PTO shaft. Its versatile design allows
the gearbox to be used as either an increasing ratio or decreasing ratio gearbox to suit your needs.
As a decreasing ratio gearbox it will reduce 1000 rpm PTO shaft speed to 540 rpm allowing the use of equipment designed to operate at 540 rpm.
As an increasing ratio gearbox it will increase 540 rpm PTO shaft speed to 1000 rpm.
The gearbox is assembled with 2 x internal splined sleeves. One 13/8″Z6 the other 13/4″Z20. These splined sleeves allow for direct coupling to your tractors PTO shaft as the input. The gearbox is also supplied with 2 x separate shafts with matching splines. These are easily assembled to give you the required output shaft.
| Ratio | Input RPM | HP | KW | SHAFT TYPE | |||
| INPUT | OUTPUT | ||||||
| 1.88;1 | 540 | 105 | 78.3 | 13/4″Z20 | 13/4″Z20 | 13/8″Z6 | 13/8″Z6 |
| 1000 | 120 | 89.5 | SHAFT | SLEEVE | SHAFT | ||
| 1:1.88 | 540 | 120 | 89.5 | 13/8″Z6 | 13/8″Z6 | 13/4″Z20 | 13/4″Z20 |
| SLEEVE | SHAFT | ||||||
| 1000 | 120 | 89.5 | |||||
GEAR MATERIALS
20CrMnTi/20CrMnMo for your choice
CASTINGS MATERIALS
Gray cast iron HT250 according to standard GB/T 1348-2009 Ductile iron QT450-10 according to standard GB/T 1348-2009 Cast steel ZG310-570 according to standard GB/T 5613-2014
SHAFTS MATERIALS
40Cr,45#,20CrMnTi,20CrMnMo for your choice according to your request.
POWER To ensure the correct use of the product we recommand to pay attention to the specifications mentioned on CZPT technical sheet.Consider also the input rotation speed,the CZPT input and the transmission ratios.Where the rotation or other working conditions are different,please contact CZPT CZPT technical department.
LUBRICATION
The reducer is usually supplied without lubricant.The recommended quantity of lubricant is indicated on CZPT catalogue and the first replaced must be done after 50-60 hours of running,then replaced after 600-800 working hours. The emptying of the gearbox should be made immediately after the working,with the oil still hot,in order to avoid the deposition of sludge.Check frequently the oil level and top up the oil whenever necessary.
Related Products
Factory
Extensive use for agricultural machines
Guarantee: CZPT precision, high wear resistance, low noise, smooth and steady, high strength
Our factory