وصف المنتج
Standard F Series Parallel Shaft Helical Gearbox Speed Reducer with 380V/660V 3 Phase Electric Motor 4KW 11KW
|
Input Configurations |
Direct motor coupled |
|
With IEC B5/B14 motor flange |
|
|
With IEC B5/B14 motor mounted |
|
|
With CHINAMFG input shaft |
|
|
Output Configurations
|
Solid output shaft |
|
Solid output shaft with flange |
|
|
Hollow output shaft |
|
|
Hollow output shaft and flange |
|
|
Variants of the Parallel Shaft Helical Gear Unit Series F / FF / FA / FAF |
Foot- or flange-mounted |
|
B5 or B14 flange-mounted |
|
|
Solid shaft or hollow shaft |
|
|
Hollow shaft with key connection, shrink disk, splined hollow shaft, or Torque Arm |
Technical Data:
| Housing material | Cast iron/Ductile iron |
| Housing hardness | HBS190-240 |
| Gear material | 20CrMnTi alloy steel |
| Surface hardness of gears | HRC58°~62 ° |
| Gear core hardness | HRC33~40 |
| Input / Output shaft material | 42CrMo alloy steel |
| Input / Output shaft hardness | HRC25~30 |
| Machining precision of gears | accurate grinding, 6~5 Grade |
| Lubricating oil | GB L-CKC220-460, Shell Omala220-460 |
| Heat treatment | tempering, cementiting, quenching, etc. |
| Efficiency | 94%~96% (depends on the transmission stage) |
| Noise (MAX) | 60~68dB |
| Temp. rise (MAX) | 40°C |
| Temp. rise (Oil)(MAX) | 50°C |
| Vibration | ≤20µm |
| Backlash | ≤20Arcmin |
| Brand of bearings | China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, NSK. |
| Brand of oil seal | NAK — ZheJiang or other brands requested |
Specification
|
Model |
Shaft Dia. mm |
Horizontal Center Height mm |
External Flange Dia. Mm |
Power Kw |
Ratio i |
Nominal Torque Nm |
|
|
Solid Shaft |
Hollow Shaft |
||||||
|
F/FF/FA/FAF37 |
ф25 |
ф30 |
70 |
160 |
0.12-3 |
4-138 |
180 |
|
F/FF/FA/FAF47 |
ф35 |
ф35 |
80 |
200 |
0.12-5.5 |
4-175 |
360 |
|
F/FF/FA/FAF57 |
ф35 |
ф40 |
100 |
250 |
0.18-7.5 |
4-197 |
420 |
|
F/FF/FA/FAF67 |
ф40 |
ф40 |
100 |
250 |
0.37-7.5 |
4-197 |
700 |
|
F/FF/FA/FAF77 |
ф50 |
ф50 |
120 |
300 |
0.75-11 |
4-197 |
1350 |
|
F/FF/FA/FAF87 |
ф60 |
ф60 |
155 |
350 |
1.5-22 |
4-193 |
2500 |
|
F/FF/FA/FAF97 |
ф70 |
ф70 |
180 |
450 |
2.2-30 |
4-203 |
3700 |
|
F/FF/FA/FAF107 |
ф90 |
ф90 |
200 |
450 |
3-45 |
4-205 |
6500 |
|
F/FF/FA/FAF127 |
ф110 |
ф100 |
240 |
550 |
5.5-90 |
4-202 |
10000 |
|
F/FF/FA/FAF157 |
ф120 |
ф120 |
270 |
660 |
11-160 |
4-190 |
18000 |
Company profile
Scenario
Packing
FAQ
Q1: I want to buy your products, how can I pay?
A: You can pay via T/T(30%+70%), L/C ,D/P etc.
Q2: How can you guarantee the quality?
A: One year’s warranty against B/L date. If you meet with quality problem, please send us pictures or video to check, we promise to send spare parts or new products to replace. Our guarantee not include inappropriate operation or wrong specification selection.
Q3: How we select models and specifications?
A: You can email us the series code (for example: RC series helical gearbox) as well as requirement details, such as motor power,output speed or ratio, service factor or your application…as much data as possible. If you can supply some pictures or drawings,it is nice.
Q4: If we don’t find what we want on your website, what should we do?
A: We offer 3 options:
1, You can email us the pictures, drawings or descriptions details. We will try to design your products on the basis of our
standard models.
2, Our R&D department is professional for OEM/ODM products by drawing/samples, you can send us samples, we do customized design for your bulk purchasing.
3, We can develop new products if they have good market. We have already developed many items for special using successful, such as special gearbox for agitator, cement conveyor, shoes machines and so on.
Q5: Can we buy 1 pc of each item for quality testing?
A: Yes, we are glad to accept trial order for quality testing.
Q6: How about your product delivery time?
A: Normally for 20’container, it takes 25-30 workdays for RV series worm gearbox, 35-40 workdays for helical gearmotors.
| Application: | Motor, Motorcycle, Machinery, Agricultural Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | M1-M6 |
| Samples: |
US$ 1152/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Repair or Replacement of a Mower Gearbox
Whether a mower gearbox can be repaired or needs to be replaced depends on the extent of the damage and the condition of the gearbox components. Here are some factors to consider:
- Minor Issues: If the gearbox is experiencing minor issues such as a leaking seal, damaged gasket, or a loose bolt, these problems can often be repaired without the need for a full replacement.
- Worn Gears or Bearings: If the gears or bearings are worn or damaged, they can sometimes be replaced individually, especially if the rest of the gearbox is in good condition.
- Severe Damage: If the gearbox housing is cracked, the gears are severely damaged, or the entire unit is extensively worn, a replacement gearbox might be the more cost-effective solution.
- Cost of Repairs: Sometimes, the cost of repairing multiple components in a gearbox can be close to the cost of a new gearbox. In such cases, it might make more sense to opt for a replacement.
- Age of the Mower: If the mower itself is old and the gearbox is showing signs of wear, it might be worth considering whether it’s more economical to invest in a new mower with a new gearbox.
It’s recommended to consult a professional mechanic or technician who specializes in mower repairs. They can assess the extent of the damage, provide you with repair and replacement options, and help you make an informed decision based on the specific situation.
الاختلافات بين علب تروس جزازات العشب اليدوية والآلية
تختلف علب تروس جزازات العشب اليدوية والآلية في طريقة تشغيلها والتحكم بها ومدى سهولة استخدامها:
- عملية: تتطلب علب التروس اليدوية من المستخدم تعشيق وفصل التروس يدويًا باستخدام القابض أو ذراع. أما علب التروس الأوتوماتيكية، فتقوم بتغيير التروس تلقائيًا بناءً على السرعة وظروف الحمل.
- يتحكم: توفر علب التروس اليدوية تحكمًا مباشرًا أكبر في اختيار التروس، مما يسمح للمستخدم باختيار الترس المناسب لمهام محددة. أما علب التروس الأوتوماتيكية، فتتيح تجربة قيادة مريحة دون استخدام اليدين، حيث تتولى علبة التروس نفسها عملية تغيير التروس.
- راحة: تُعدّ علب التروس الأوتوماتيكية أكثر ملاءمة للمستخدمين الذين يفضلون تجربة قيادة سلسة وخالية من المتاعب. فهي تُغني عن الحاجة إلى تغيير التروس يدويًا، مما يجعل التشغيل أبسط وأكثر سهولة في الاستخدام.
- تعقيد: تتميز علب التروس الأوتوماتيكية بتصميم أكثر تعقيدًا مقارنة بعلب التروس اليدوية نظرًا لوجود أجهزة استشعار، وأجهزة تحكم إلكترونية، ومكونات إضافية مطلوبة للتحويل التلقائي.
- كفاءة: توفر علب التروس اليدوية تحكمًا أفضل في توصيل الطاقة، وقد تكون أكثر كفاءة في بعض الحالات. مع ذلك، تعمل علب التروس الأوتوماتيكية على تحسين تغييرات التروس لزيادة كفاءة استهلاك الوقود وتحسين الأداء.
- يكلف: تُعتبر علب التروس الأوتوماتيكية أغلى ثمناً في التصنيع والإصلاح عموماً نظراً لتعقيدها. أما علب التروس اليدوية فهي أبسط وأقل تكلفة في أغلب الأحيان.
يعتمد اختيار علبة تروس جزازة العشب اليدوية أو الأوتوماتيكية على تفضيل المستخدم، ومستوى التحكم المطلوب، والاستخدام المقصود للجزازة. ولكل نوع مزاياه وعيوبه، وينبغي أن يستند القرار إلى احتياجات المستخدم وأولوياته.
Maintaining a Mower Gearbox
Maintaining a mower gearbox is crucial to ensure its longevity, performance, and safe operation. Here are the key steps to effectively maintain a mower gearbox:
- Regular Inspection: Periodically inspect the gearbox for signs of wear, damage, or leaks. Check for any unusual noises or vibrations during operation.
- Lubrication: Follow the manufacturer’s guidelines for lubrication. Ensure the gearbox is properly lubricated with the recommended oil to minimize friction and reduce wear on moving parts.
- Cleaning: Keep the gearbox clean by removing dirt, debris, and grass clippings that can accumulate around the housing. Clean the exterior as well as the cooling fins to prevent overheating.
- Belt Tension: If the mower has belts connected to the gearbox, maintain proper belt tension according to the manufacturer’s recommendations. Loose or overly tight belts can affect the gearbox’s performance.
- Bearing Inspection: Check the bearings for any signs of wear, noise, or rough operation. Replace worn bearings to prevent damage to other components.
- Seals: Ensure that seals are intact and functioning properly. Replace damaged seals to prevent contaminants from entering the gearbox.
- Blade Maintenance: If the gearbox is associated with cutting blades, regularly sharpen and balance the blades to reduce strain on the gearbox. Replace any damaged or worn blades.
- Tighten Fasteners: Check and tighten all bolts, nuts, and fasteners that secure the gearbox components. Loose fasteners can lead to vibrations and misalignment.
- Alignment: Ensure that the gearbox is properly aligned with other components, such as the engine and cutting blades. Misalignment can cause excessive wear and reduce efficiency.
- Grease Fittings: If applicable, use grease fittings to lubricate specific components. Follow the manufacturer’s recommendations for greasing intervals.
- Professional Maintenance: If you’re unsure about certain maintenance tasks or notice significant issues, consider seeking professional maintenance or servicing for the gearbox.
By following these maintenance practices, you can extend the lifespan of the mower gearbox and ensure that it operates smoothly and efficiently during mowing operations.
editor by CX 2023-10-16
