Descripción
Reliable Compact Right-Angle Gearbox for Every Field: EP-19455-KW
When your lawn mower gearbox needs to perform without question, the EP-19455-KW delivers. Rated for 20 HP at 540 rpm, its carburized spiral bevel gears and environmentally sealed housing handle everything from fine pasture topping to aggressive brush clearing.
📈 EP-19455-KW Technical Specifications
| Parámetro | Especificación |
|---|---|
| Número de modelo | EP-19455-KW |
| Tipo de caja de cambios | Compact Right-Angle Gearbox |
| Relación(es) de transmisión | 1:1 |
| Configuración de los dientes | 19/19 |
| Módulo de engranajes | 4.23 |
| Potencia nominal | 20 HP |
| Velocidad de entrada | 540 rpm |
| Eje de entrada/salida | ø25 Optical axis |
| Peso neto | 9 Kg |
| Material de engranajes | Acero aleado 20CrMnTi, carburizado y endurecido HRC 58-62 |
| Material de vivienda | Grey Cast Iron (HT200/HT250) |
| Protección de sellado | Retenes de aceite multilabios NBR/FKM, con clasificación IP65+ |
| Lubricación | Aceite para engranajes SAE 80W-90 o 85W-140 EP |
| Tratamiento de superficies | Imprimación electroforética + recubrimiento en polvo de poliéster, acabado rojo. |
⭐ Características clave y ventajas de ingeniería
⚗
500-Hour Extended Oil Intervals
Large sump capacity with high-grade EP oil enables 500-hour drain intervals, reducing maintenance frequency during the busiest planting and cultivation seasons.
🔒
Oil-Bath Splash Lubrication
Generous sump with directional baffles ensures all gear teeth and bearing races are oil-wetted at all times, even at the lowest recommended operating speed.
⚡
Magnetic Drain Plug
Neodymium drain plug captures ferrous wear particles from break-in and normal operation, protecting gears and bearings from abrasive recirculation damage.
🔄
High-Capacity Oil Sump Design
30% larger oil volume compared to standard models, reducing operating temperature by 8-12 °C during sustained high-load mowing and extending lubricant life.
🔨
Split-Line O-Ring Seal
Precision-machined housing split line with fluorocarbon O-ring eliminates the gasket creep and re-torque requirements of traditional paper or RTV gasket joints.
🌡
Low-Backlash Preloaded Assembly
Bearing preload and controlled gear mesh clearance hold total backlash below 0.08 mm, critical for reversing-load applications and precision-cut implements.
🔧 Compatibilidad de equipos y referencias cruzadas
🔄 Cross-Reference Compatibility for EP-19455-KW
The EP-19455-KW is engineered as a direct replacement or upgrade for gearboxes fitted to equipment from leading manufacturers including:
Dongfeng • John Deere • AGCO • Rhino • LS Tractor • Fella • Sonalika • Branson
Descargo de responsabilidad: Las marcas mencionadas anteriormente se utilizan únicamente para identificar la compatibilidad. Ever-power Australia Mower Gearbox Co., Ltd. no está afiliada, respaldada ni autorizada por ninguno de los fabricantes mencionados. Todas las marcas registradas pertenecen a sus respectivos propietarios.
📚 Guía de selección de cajas de cambios
A well-matched gearbox delivers years of trouble-free service. Follow this guide to confirm the EP-19455-KW is the optimal choice for your needs:
🌾 Escenarios de aplicación típicos
🌾 Rotary cutting of improved pasture on dairy and beef farms
🚘 Solar farm ground cover and weed management
🌱 Firebreak establishment and maintenance mowing
⛰ Disc mowing of grass and legume hay crops
🌳 Airfield perimeter and runway strip grass management
🛠 Guía de instalación y configuración
- Primero, apriete todos los tornillos de montaje a mano y, a continuación, aplique el par de apriete especificado siguiendo un patrón en cruz (o estrella) para asegurar una sujeción uniforme. Par de apriete típico: 80-120 Nm, según el tamaño del tornillo.
- With the implement raised and blades clear of the ground, engage the PTO at low idle speed. Listen for any unusual noise and observe for vibration or oil leaks.
- Verify that the mower implement safety chain or restraint is properly connected to prevent the gearbox from contacting the ground if the three-point hitch fails.
- Apply a thin, even bead of RTV silicone sealant to the mounting flange face if a pre-cut gasket is not included with the new gearbox.
- Connect the PTO drive shaft to the gearbox input spline. Push the shaft on fully and verify it telescopes freely through the complete range of three-point hitch travel.
- After the first 10 hours of operation, re-torque all mounting bolts to specification and verify oil level. Perform the first oil drain and refill at 50 hours.
- Disconnect the tractor PTO shaft and safely support the mower implement on jack stands or blocks before beginning the gearbox installation procedure.
❓ Preguntas frecuentes
⭐ Opiniones de clientes e informes de campo
Bruce K.
★★★★★
📍 Nueva Gales del Sur, Australia
Handles our prairie conditions well — cold starts at -20°C and summer dust. This gearbox just keeps working without fuss.
Henri D.
★★★★★
📍 Normandy, France
Bought for heavy hay field cutting work. Dust, heat, debris — it handles everything. The seals are particularly impressive in dirty conditions.
Yusuf A.
★★★★★
📍 Konya, Turkey
Solid replacement unit. Took minimal effort to install. Once running, it is smooth and efficient. Good value for money.
Tom W.
★★★★☆
📍 Iowa, United States
High quality comparable to European brands at roughly half the price. Gear tooth finish and bearing smoothness are both excellent.
Ahmed K.
★★★★☆
📍 Faisalabad, Pakistan
Third unit purchased for our growing fleet. Consistent quality every time. Their factory clearly has disciplined production processes.
⚖ EP-19455-KW vs. Low-Cost Alternatives
| Característica | EP-19455-KW (Ever-power) | Alternativa genérica/de bajo costo |
|---|---|---|
| Cooling Design | ✔ Machined External Cooling Fins, 35% More Area | ✘ Smooth Housing, Poor Heat Dissipation |
| Output Flange | ✔ Forged Steel, Heat-Treated HRC 28-32 | ✘ Cast Iron, Untreated, Prone to Cracking |
| Material de engranajes | ✔ 20CrMnTi Forged Alloy Steel, Carburized HRC 58-62 | ✘ 45# Carbon Steel, Surface Hardened HRC 40-45 |
| Warranty | ✔ 12-Month Full Manufacturer Warranty | ✘ 3-6 Month Limited Warranty |
| Seal Longevity | ✔ FKM/Viton Seals, 2000+ Hour Service Life | ✘ NBR Seals, 500-800 Hours Before Leaking |
| Breather | ✔ Labyrinth Stainless Steel Breather Valve | ✘ Simple Open Vent Hole, Allows Water Entry |
| Gear Forging Method | ✔ Closed-Die Forged, Grain-Flow Aligned | ✘ Open-Die Forged or Cast, Weak Grain Structure |
🔄 Productos y accesorios relacionados
Explore nuestra gama completa de componentes de transmisión agrícola including PTO shafts, gears, pulleys, chains, and sprockets — all engineered to integrate seamlessly with EP-19455-KW gearboxes.
🏆 Certificaciones y estándares de calidad
Every EP-19455-KW carries the weight of our ISO 9001:2015 quality system and 20+ years of continuous improvement. We use statistical process control (SPC) on critical gear dimensions, maintain measurement system analysis (MSA) per AIAG standards, and archive all inspection data for a minimum of 10 years. This discipline is why our field failure rate remains below 0.3%.
🏭 ¿Por qué elegir Ever-power Australia Mower Gearbox Co.,Ltd.?
We built Ever-power Australia Mower Gearbox Co.,Ltd. on the principle that no farmer should have to choose between quality and affordability. Every gearbox leaving our factory undergoes 100% dimensional inspection on Zeiss CMMs, gear geometry verification on Gleason analyzers, hydrostatic leak testing, and no-load run-in testing. This multi-stage quality gate is why Ever-power Australia Mower Gearbox Co.,Ltd. gearboxes are trusted by agricultural dealers in 45+ countries — and why our repeat order rate exceeds 85% year after year.
📞 Get Your EP-19455-KW Quote Today
Your mowing equipment deserves a gearbox engineered for the long haul. Request your EP-19455-KW quote today and join thousands of satisfied operators who made the switch to Ever-power Australia Mower Gearbox Co.,Ltd..
