उत्पाद वर्णन
| Product Features | Description |
| Product Models | T2, T4, T6, T7, T8, T10, T12, T16, T20, T25, Z2, Z4, Z6, Z7, Z8, Z10, Z12, Z16, Z20, Z25, JRTM2, JRTM4, JRTM6, JRTM7, JRTM8, JRTM10, JRTM12, JRTM16, JRTM20, JRTM25 |
| Maintenance | Clean internally and replace lubricant after initial use of 2 weeks or 100-200 hours. For long-term use, replace lubricant every half to 1 year or every 1000-2000 hours |
| Lubricant | China Petroleum’s all-effect gear oil of 90-120 degrees. Under low speed and light load conditions, it is recommended to use all-effect gear oil of 90 degrees. Under heavy load and high temperature conditions, it is recommended to use all-effect gear oil of 120 degrees |
| उत्पाद वर्णन | The T series spiral bevel gear steering gearbox is widely used in food, pharmaceutical, chemical, steel, metallurgy, textile, plastic, paper and other machinery equipment, assembly lines and other industries |
| Technical Features | The gearbox has a high rigidity FC-25 cast iron casing. The gears are made of high-quality high-purity alloy steel 20CrMnTi carburized and quenched, and ground. The shaft is tempered alloy steel with high load-bearing capacity. It is equipped with a heavy load-bearing tapered roller bearing. The oil seal has a double lip seal, which has dustproof and oil leakage prevention capabilities |
| Performance Features | The T series spiral bevel gear steering gearbox is standardized and has many varieties. The speed ratio is all actual transmission ratios, with an average efficiency of 98%. It can run CZPT and reverse, with smooth low-speed or high-speed transmission, low noise, small vibration, and large bearing force |
| Technical Parameters | Speed ratio range: 1/1, 1.5/1, 2/1, 2.5/1, 3/1, 4/1, 5/1. Torque range: 11.2 – 5713 Nm. Power range: 0.014 – 335 kW |
·Product Models: T2, T4, T6, T7, T8, T10, T12, T16, T20, T25, Z2, Z4, Z6, Z7, Z8, Z10, Z12, Z16, Z20, Z25, JRTM2, JRTM4, JRTM6, JRTM7, JRTM8, JRTM10, JRTM12, JRTM16, JRTM20, JRTM25.
·Maintenance: The gearbox should be cleaned internally and the lubricant should be replaced after the initial use of 2 weeks or 100-200 hours. For long-term use, the lubricant should be replaced every half to 1 year or every 1000-2000 hours.
·Lubricant: The product uses China Petroleum’s all-effect gear oil of 90-120 degrees. Under low speed and light load conditions, it is recommended to use all-effect gear oil of 90 degrees. Under heavy load and high temperature conditions, it is recommended to use all-effect gear oil of 120 degrees.
·Product Description: The T series spiral bevel gear steering gearbox is widely used in food, pharmaceutical, chemical, steel, metallurgy, textile, plastic, paper and other machinery equipment, assembly lines and other industries.
·Technical Features: The gearbox has a high rigidity FC-25 cast iron casing. The gears are made of high-quality high-purity alloy steel 20CrMnTi carburized and quenched, and ground. The shaft is tempered alloy steel with high load-bearing capacity. It is equipped with a heavy load-bearing tapered roller bearing. The oil seal has a double lip seal, which has dustproof and oil leakage prevention capabilities.
·Performance Features: The T series spiral bevel gear steering gearbox is standardized and has many varieties. The speed ratio is all actual transmission ratios, with an average efficiency of 98%. It can run CZPT and reverse, with smooth low-speed or high-speed transmission, low noise, small vibration, and large bearing force.
RFQ
Q:What information should I tell you to confirm speed reducer?
A: Model/Size, Transmission Ratio, Shaft directions & Order quantity.
Q:What if I don’t know which gear reducer I need?
A:Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.
Q:What should I provide if I want to order NON-STANDERD speed reducers?
A: Drafts, Dimensions, Pictures and samples if possible.
Q:What is the MOQ?
A: It is OK for 1 or small pieces trial order for quality testing.
Q:How long should I wait for the feedback after I send the inquiry?
A: Within 6 hours
Q:What is the payment term?
A:You can pay via T/T(30% in advance+70% before delivery), L/C ,West Union etc
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Three-Step |
| उदाहरण: |
US$ 100/Piece
1 पीस (न्यूनतम ऑर्डर) | |
|---|
Lubrication Frequency for Mower Gearbox
The frequency of lubricating your mower gearbox depends on the manufacturer’s recommendations, usage intensity, and operating conditions. Here are some general guidelines:
- Regular Maintenance: It’s recommended to lubricate your mower gearbox at the beginning of the mowing season or after about 25-50 hours of operation.
- Heavy Usage: If you’re using your mower frequently or in challenging conditions such as dusty or wet environments, you might need to lubricate more often, perhaps every 10-20 hours of operation.
- Check the Manual: Consult your mower’s user manual for specific lubrication intervals and the type of lubricant to use. Different mowers and gearboxes might have varying requirements.
- Inspect Regularly: Keep an eye on the gearbox for any signs of oil leakage or unusual noise. If you notice any issues, it’s a good idea to inspect and lubricate the gearbox as needed.
Using the right type of lubricant is crucial for optimal gearbox performance. Make sure to use a high-quality lubricating oil recommended by the manufacturer. Always follow proper lubrication procedures outlined in the user manual to ensure the longevity and efficiency of your mower gearbox.
अपने लॉन मोवर के लिए सही मोवर गियरबॉक्स का चयन करना
अपने लॉन मोवर के लिए सही गियरबॉक्स का चयन करते समय अनुकूलता, प्रदर्शन और दीर्घायु सुनिश्चित करने के लिए कई महत्वपूर्ण कारकों पर विचार करना आवश्यक है:
- घास काटने की मशीन का प्रकार: रोटरी मोवर, रील मोवर और फ्लेल मोवर जैसे विभिन्न प्रकार के मोवरों के लिए विशिष्ट गियरबॉक्स डिज़ाइन की आवश्यकता हो सकती है। अपने मोवर के प्रकार के अनुरूप गियरबॉक्स चुनें।
- शक्ति और टॉर्क: अपने लॉन घास काटने की मशीन की शक्ति और टॉर्क आवश्यकताओं की गणना करें ताकि यह सुनिश्चित हो सके कि गियरबॉक्स बिना किसी तनाव के भार को संभाल सके।
- माउंटिंग अनुकूलता: सुनिश्चित करें कि गियरबॉक्स के माउंटिंग पॉइंट आपके लॉन घास काटने की मशीन के माउंटिंग पॉइंट से मेल खाते हों। सही इंस्टॉलेशन और कार्यक्षमता के लिए अनुकूलता अनिवार्य है।
- शाफ्ट का आकार और प्रकार: गियरबॉक्स और लॉन मोवर दोनों के शाफ्ट के आकार और प्रकार पर विचार करें ताकि यह सुनिश्चित हो सके कि उन्हें सुरक्षित रूप से जोड़ा जा सके।
- गियर अनुपात: अपनी विशिष्ट आवश्यकता के अनुसार वांछित कटाई या घास काटने की गति प्रदान करने वाला गियर अनुपात चुनें।
- गुणवत्ता और ब्रांड: उच्च गुणवत्ता वाले गियरबॉक्स बनाने के लिए प्रसिद्ध प्रतिष्ठित ब्रांड का चयन करें। उच्च गुणवत्ता वाले पुर्जे टिकाऊपन और बेहतर प्रदर्शन में योगदान देते हैं।
- रखरखाव संबंधी आवश्यकताएँ: गियरबॉक्स की रखरखाव संबंधी आवश्यकताओं पर विचार करें और ऐसा गियरबॉक्स चुनें जो नियमित रखरखाव करने की आपकी तत्परता के अनुरूप हो।
- बजट: गुणवत्ता महत्वपूर्ण है, लेकिन अपने बजट को ध्यान में रखें और अपनी वित्तीय सीमाओं के भीतर सर्वोत्तम गुणवत्ता वाले गियरबॉक्स का चयन करने का लक्ष्य रखें।
अपने लॉन मोवर के मॉडल और उपयोग के लिए सही गियरबॉक्स चुनने के लिए, कृपया अपने मोवर के मैनुअल या किसी पेशेवर से सलाह लें। सही गियरबॉक्स चुनने से मोवर का संचालन सुचारू रूप से होता है और उसकी आयु भी बढ़ती है।
Function of a Mower Gearbox
A mower gearbox operates through a series of gears and components that work together to transmit power and convert the rotational motion of the engine into the cutting action of the blades. Here’s how a typical mower gearbox works:
- Power Input: The mower gearbox receives power from the mower’s engine via a drive shaft.
- Gear Reduction: The gearbox contains a set of gears that are arranged in specific ratios to achieve the required torque and speed conversion. The input gear, connected to the drive shaft, meshes with one or more intermediate gears.
- Torque Conversion: As the input gear turns, it drives the intermediate gears. The gear arrangement within the gearbox results in a reduction of speed and an increase in torque. This is essential for providing the cutting blades with the necessary force to cut through vegetation.
- Blade Connection: The output shaft of the gearbox is connected to the cutting blades. As the gearbox output shaft rotates, it transfers the torque to the blades, causing them to spin.
- Blade Rotation: The rotational motion of the blades is what enables them to cut through grass and other vegetation. The increased torque generated by the gearbox allows the blades to effectively perform cutting or mulching actions.
Modern mower gearboxes are designed for efficiency, durability, and precision. They are often equipped with ball bearings, seals, and lubrication to minimize friction and ensure smooth operation. Some mower gearboxes also include additional features such as adjustable cutting heights, blade synchronization, and directional control to enhance the versatility of the mower.
editor by CX 2023-09-07
