विवरण
EP-01-707 — Professional-Grade Medium-Duty Rotary Cutter Gearbox for Agricultural Mowing
The EP-01-707 यह एक उद्देश्य-निर्मित है लॉन मोवर गियरबॉक्स विश्वसनीय समकोण शक्ति संचरण प्रदान करना 60 एचपी साथ 540 आरपीएम पीटीओ इनपुट। इसके स्पाइरल बेवल गियर और सीलबंद संरचना, कठिन फील्ड परिस्थितियों में हजारों घंटों तक लगातार प्रदर्शन सुनिश्चित करते हैं।
📈 EP-01-707 Technical Specifications
| पैरामीटर | विनिर्देश |
|---|---|
| मॉडल संख्या | EP-01-707 |
| गियरबॉक्स प्रकार | Medium-Duty Rotary Cutter Gearbox |
| गियर अनुपात(ओं) | 1:1.44 |
| दांतों की संरचना | 23/16 |
| गियर मॉड्यूल | 6 |
| मूल्यांकित शक्ति | 60 एचपी |
| इनपुट गति | 540 आरपीएम |
| इनपुट/आउटपुट शाफ्ट | 1 3/4 Z20 / Taper spline |
| शुद्ध वजन | 37 Kg |
| गियर सामग्री | 20CrMnTi मिश्र धातु इस्पात, कार्बराइज्ड और कठोर, एचआरसी 58-62 |
| आवास सामग्री | ग्रे कास्ट आयरन (HT200/HT250) |
| सील सुरक्षा | मल्टी-लिप एनबीआर/एफकेएम ऑयल सील, आईपी65+ रेटिंग |
| स्नेहन | SAE 80W-90 या 85W-140 EP गियर ऑयल |
| सतह का उपचार | ई-कोट प्राइमर + पॉलिएस्टर पाउडर कोट, लाल रंग का फिनिश |
⭐ मुख्य विशेषताएं और इंजीनियरिंग संबंधी लाभ
🔒
Pressurized Internal Oil Pump
Gear-driven micro-pump maintains positive lubrication pressure at all critical contacts, enabling safe operation on slopes exceeding 40° without oil starvation.
⚡
Lightweight AlSi7Mg T6 Housing
Aluminum-silicon alloy housing with T6 temper provides excellent thermal conductivity for cooler operation and natural corrosion resistance in wet haymaking environments.
🔄
Sealed-for-Life Bearing Pack
Bearings factory-packed with Mobil XHP 222 high-temp grease, delivering 1,500 hours of maintenance-free disc mower operation before re-greasing is needed.
🔨
Space-Optimized Thin-Wall Enclosure
Compact aluminum or thin-wall iron casing for applications where overall gearbox envelope and weight are hard-limited by implement frame constraints.
🌡
Multi-Position Bolt Pattern
Versatile mounting interface with tapped holes at 0°, 90°, and 180° orientations, fitting a wide range of implement frame geometries without adapter plates.
🛠
E-Coat + Powder Coat Finish
25 μm zinc-rich e-coat primer plus 80 μm polyester powder topcoat provides 1,000+ hours of ASTM B117 salt-spray corrosion resistance.
🔧 उपकरण अनुकूलता और क्रॉस-रेफरेंस
🔄 Cross-Reference Compatibility for EP-01-707
The EP-01-707 is engineered as a direct replacement or upgrade for gearboxes fitted to equipment from leading manufacturers including:
Massey Ferguson • Deutz-Fahr • Woods • Krone • McConnel • Fendt • Iseki • YTO
अस्वीकरण: ऊपर दिए गए ब्रांड नाम केवल अनुकूलता की पहचान के लिए संदर्भित हैं। एवर-पावर ऑस्ट्रेलिया मोवर गियरबॉक्स कंपनी लिमिटेड किसी भी सूचीबद्ध निर्माता से संबद्ध नहीं है, न ही उनके द्वारा समर्थित या अधिकृत है। सभी ट्रेडमार्क उनके संबंधित स्वामियों के स्वामित्व में हैं।
📚 गियरबॉक्स चयन गाइड
Choosing the right mower gearbox is critical for implement performance and longevity. Use the following criteria when evaluating the EP-01-707:
🌾 विशिष्ट अनुप्रयोग परिदृश्य
🌾 Firebreak establishment and maintenance mowing
🚘 Disc mowing of grass and legume hay crops
🌱 Airfield perimeter and runway strip grass management
⛰ Sugar cane and crop stubble field mulching
🌳 Dairy farm laneway and yard surround maintenance
🛠 स्थापना और सेटअप गाइड
- After the first 10 hours of operation, re-torque all mounting bolts to specification and verify oil level. Perform the first oil drain and refill at 50 hours.
- Disconnect the tractor PTO shaft and safely support the mower implement on jack stands or blocks before beginning the gearbox installation procedure.
- For units weighing over 25 kg, use a chain hoist, engine crane, or two-person lift to position the gearbox. Never attempt to lift heavy gearboxes solo.
- Fill the gearbox with the recommended gear oil (SAE 80W-90 or 85W-140 EP) to the level indicated on the sight glass or dipstick. Do not overfill.
- Before operating at full load, run through a graduated break-in sequence: 30 minutes at half-throttle, then 30 minutes at three-quarter throttle, before engaging full PTO speed.
- उपकरण माउंटिंग पैड की समतलता की जांच करने के लिए स्केल का उपयोग करें। यदि उसमें 0.5 मिमी से अधिक का विचलन है, तो नया गियरबॉक्स लगाने से पहले उसे ठीक कर लें।
- संचालन के दौरान कंपन के कारण ढीले होने से बचाने के लिए सभी माउंटिंग बोल्ट पर नॉर्ड-लॉक वॉशर या थ्रेड-लॉकिंग कंपाउंड का उपयोग करें।
❓ अक्सर पूछे जाने वाले प्रश्न
⭐ ग्राहक समीक्षाएँ और फील्ड रिपोर्ट
Mark T.
★★★★★
📍 Victoria, Australia
Good quality for the price. Our crew runs these gearboxes hard and they hold up better than previous brands we have tried.
Tom W.
★★★★★
📍 Iowa, United States
We fitted six of these across our fleet. Every single unit has performed flawlessly through two complete cutting seasons.
Ahmed K.
★★★★★
📍 Faisalabad, Pakistan
Excellent for orchard floor management. The cooling fin design makes maintenance easy and keeps unplanned downtime to a minimum.
Oleksiy H.
★★★★☆
📍 Poltava, Ukraine
Runs noticeably cooler than the old gearbox it replaced. The improved cooling design and better oil volume are making a real difference.
Carlos R.
★★★★☆
📍 Córdoba, Argentina
We tested this against a competitor unit side by side. This one runs quieter, stays cooler, and the oil stayed cleaner over 200 hours.
⚖ EP-01-707 vs. Low-Cost Alternatives
| विशेषता | EP-01-707 (Ever-power) | सामान्य/कम लागत वाला विकल्प |
|---|---|---|
| Drain Plug | ✔ Magnetic Plug Captures Wear Particles | ✘ Standard Plug, No Particle Capture |
| Traceability | ✔ Laser-Etched Serial, Full Material Records | ✘ No Serial Number, No Traceability |
| Housing Machining | ✔ 5-Axis CNC, IT6 Bore Tolerance | ✘ 3-Axis CNC or Manual, IT9 Bore Tolerance |
| Spare Parts Availability | ✔ Full Inventory, Ships Within 24 Hours | ✘ Limited Stock, 4-8 Week Back-Order |
| Lead Time | ✔ 3-5 Days Standard, 4-6 Weeks Custom | ✘ 8-12 Weeks, No Expedite Option |
| Gear Accuracy | ✔ AGMA Class 8-10, CNC Ground Post Heat-Treatment | ✘ AGMA Class 5-6, Hobbed Only, No Grinding |
| Oil Capacity | ✔ Generous Sump for Extended Cooling, Sight Glass | ✘ Minimal Oil Volume, No Level Indicator |
🔄 संबंधित उत्पाद और सहायक उपकरण
हमारी संपूर्ण रेंज देखें कृषि संचरण घटक including PTO shafts, gears, pulleys, chains, and sprockets — all engineered to integrate seamlessly with EP-01-707 gearboxes.
🏆 प्रमाणन और गुणवत्ता मानक
Our manufacturing facility holds ISO 9001:2015 quality management and ISO 14001:2015 environmental management certifications. All gear steel is supplied with EN 10204 Type 3.1 mill test certificates. Heat treatment processes are monitored per CQI-9 (Special Process: Heat Treat System Assessment). Every EP-01-707 undergoes 100% dimensional inspection and functional testing before shipment.
🏭 एवर-पावर ऑस्ट्रेलिया मोवर गियरबॉक्स कंपनी लिमिटेड को क्यों चुनें?
At Ever-power Australia Mower Gearbox Co.,Ltd., we have invested over two decades building one of the most advanced agricultural gearbox production facilities in the Asia-Pacific region. Our 19000 m² campus integrates in-house forging, CNC gear cutting, automated heat treatment, precision grinding, and assembly under one roof — giving us end-to-end quality control that outsourced manufacturers simply cannot match. We produce 59000 gearbox units annually, serving OEM partners and distributors across 49+ countries on six continents, with particular strength in the Australian, North American, and European markets.
📞 Get Your EP-01-707 Quote Today
Ready to boost your mowing productivity with the EP-01-707? Our application engineers can match this gearbox to your specific tractor and implement — get a tailored recommendation today.
