Keterangan
Built to Last: EP-RC33 Multi-Ratio Rotary Cutter Gearbox
Itu EP-RC33 is built for the operator who values uptime above all else. This gearbox pertanian handles 30 / 30 / 30 HP through precision-machined spiral bevel gears, supported by premium bearings and multi-stage sealing for maximum service life.
📈 EP-RC33 Technical Specifications
| Parameter | Spesifikasi |
|---|---|
| Nomor Model | EP-RC33 |
| Jenis Gearbox | Multi-Ratio Rotary Cutter Gearbox |
| Rasio Gigi | 1:1.93 / 1:1.69 / 1:1.47 |
| Konfigurasi Gigi | 15/29, 13/22, 15/22 |
| Modul Gigi | 4.0 / 5.0 / 5.08 |
| Daya Terukur | 30 / 30 / 30 HP |
| Kecepatan Masukan | 540 rpm |
| Poros Masukan/Keluaran | 1 3/8 Z6 / Optic axis |
| Berat Bersih | 26 Kg |
| Bahan Roda Gigi | Baja Paduan 20CrMnTi, Dikarburisasi & Dikeraskan HRC 58-62 |
| Bahan Perumahan | Besi Cor Abu-abu (HT200/HT250) |
| Perlindungan Segel | Segel Oli Multi-Bibir NBR/FKM, Peringkat IP65+ |
| Pelumasan | Oli roda gigi SAE 80W-90 atau 85W-140 EP |
| Perawatan Permukaan | Primer E-Coat + Lapisan Serbuk Poliester, Warna Merah |
⭐ Fitur Utama & Keunggulan Teknik
🚀
Redundant Lubrication Groove System
Machined oil distribution grooves in the housing bore supplement splash lubrication, providing a secondary oil path to bearings if sump level drops slightly below specification.
💪
Reinforced Grey Cast Iron Housing
HT250-grade grey iron casing with 14 mm wall thickness, ribbed for vibration damping and thermal dissipation, resisting cracking from rock strikes at mowing speed.
⚙
Standard 1 3/8″ 6-Spline PTO Input
Industry-standard input spline accepts all 540 RPM PTO shafts, ensuring bolt-on compatibility with tractors from 15 HP sub-compacts to 50 HP utility models.
⚗
Induction-Hardened Output Shaft
Output shaft journals hardened to HRC 50-55 via controlled induction heating, extending bearing seat life beyond 3,000 operating hours before re-machining is needed.
🔒
Triple-Stage Shaft Sealing
Inner labyrinth + double-lip FKM seal + external V-ring slinger form a three-barrier defense against water, mud, and fine dust penetrating to the bearing cavities.
⚡
Integrated External Cooling Fins
35% additional surface area from machined cooling ribs accelerates heat rejection, keeping oil temperature below 80 °C during sustained full-load summer mowing.
🔧 Kompatibilitas dan Referensi Silang Peralatan
🔄 Cross-Reference Compatibility for EP-RC33
The EP-RC33 is engineered as a direct replacement or upgrade for gearboxes fitted to equipment from leading manufacturers including:
McConnel • Fendt • Iseki • YTO • Massey Ferguson • Deutz-Fahr • Woods • Krone
Penafian: Nama merek di atas hanya dirujuk untuk identifikasi kompatibilitas. Ever-power Australia Mower Gearbox Co.,Ltd. tidak berafiliasi dengan, didukung oleh, atau diotorisasi oleh produsen mana pun yang tercantum. Semua merek dagang milik pemiliknya masing-masing.
📚 Panduan Pemilihan Transmisi
The EP-RC33 covers a specific performance envelope. Use these selection criteria to verify it aligns with your operational parameters:
🌾 Skenario Aplikasi Umum
🌾 Mining site vegetation rehabilitation and control
🚘 Forestry site preparation and plantation row clearing
🌱 Stubble incorporation and green manure tillage
⛰ Municipal park and recreational reserve mowing
🌳 Silage paddock management and pasture renovation
🛠 Panduan Instalasi & Pengaturan
- Before operating at full load, run through a graduated break-in sequence: 30 minutes at half-throttle, then 30 minutes at three-quarter throttle, before engaging full PTO speed.
- Inspect the implement mounting pad for flatness using a straightedge. Any warping exceeding 0.5 mm should be corrected before the new gearbox is installed.
- Use Nord-Lock washers or thread-locking compound on all mounting bolts to prevent vibration-induced loosening during operation.
- Run the gearbox at no load for 5-10 minutes, then shut down and re-check oil level — new seals and bearings often absorb a small amount of initial oil.
- Bersihkan permukaan tempat pemasangan alat secara menyeluruh, hilangkan semua karat, sisa material paking lama, serpihan cat, dan kotoran yang dapat menghalangi kontak yang rapat dengan flensa gearbox.
- Posisikan kotak roda gigi pada baut atau lubang pemasangan, pastikan poros input menghadap PTO traktor dan poros output sejajar dengan hub pisau atau rotor.
- Pastikan poros PTO memiliki tumpang tindih spline minimal 50% di semua posisi pengoperasian. Tumpang tindih yang tidak memadai menyebabkan keausan spline yang cepat dan potensi pemisahan poros.
❓ Pertanyaan yang Sering Diajukan
⭐ Ulasan Pelanggan & Laporan Lapangan
Colin P.
★★★★★
📍 Tasmania, Australia
First purchase from this manufacturer and I am thoroughly impressed. Build quality, documentation, and support were all top-notch.
Yusuf A.
★★★★★
📍 Konya, Turkey
After comparing specifications across five brands, this offered the best combination of materials, weight, and price. No regrets.
Tom W.
★★★★★
📍 Iowa, United States
Fitted to my finish mower last season. Over 400 hours and counting — zero leaks, minimal noise. Excellent value for a professional-grade unit.
Ahmed K.
★★★★☆
📍 Faisalabad, Pakistan
Dioperasikan dengan traktor 40-50 HP di padang rumput berbatu. Mampu melewati bebatuan dan medan kasar tanpa masalah. Sangat terkesan dengan kualitas pembuatannya.
Oleksiy H.
★★★★☆
📍 Poltava, Ukraine
Kami membeli dua unit untuk operasional kami. Kualitas kedua unit konsisten, yang menunjukkan bahwa kontrol kualitas pabrik mereka sangat baik. Kami akan membeli lagi.
⚖ EP-RC33 vs. Low-Cost Alternatives
| Fitur | EP-RC33 (Ever-power) | Alternatif Generik / Murah |
|---|---|---|
| Lead Time | ✔ 3-5 Days Standard, 4-6 Weeks Custom | ✘ 8-12 Weeks, No Expedite Option |
| Gear Accuracy | ✔ AGMA Class 8-10, CNC Ground Post Heat-Treatment | ✘ AGMA Class 5-6, Hobbed Only, No Grinding |
| Oil Capacity | ✔ Generous Sump for Extended Cooling, Sight Glass | ✘ Minimal Oil Volume, No Level Indicator |
| Drain Plug | ✔ Magnetic Plug Captures Wear Particles | ✘ Standard Plug, No Particle Capture |
| Traceability | ✔ Laser-Etched Serial, Full Material Records | ✘ No Serial Number, No Traceability |
| Housing Machining | ✔ 5-Axis CNC, IT6 Bore Tolerance | ✘ 3-Axis CNC or Manual, IT9 Bore Tolerance |
| Spare Parts Availability | ✔ Full Inventory, Ships Within 24 Hours | ✘ Limited Stock, 4-8 Week Back-Order |
🔄 Related Products & Accessories
Browse our complete range of agricultural transmission components including PTO shafts, gears, pulleys, chains, and sprockets — all engineered to integrate seamlessly with EP-RC33 gearboxes.
🏆 Certifications & Quality Standards
Manufactured under ISO 9001:2015 and audited annually by international OEM customers, the EP-RC33 represents our commitment to world-class quality. Gear material certificates (3.1), heat-treatment records, bearing lot traceability, and final inspection reports are maintained for every production batch and available upon customer request.
🏭 Why Choose Ever-power Australia Mower Gearbox Co.,Ltd.?
At Ever-power Australia Mower Gearbox Co.,Ltd., we are not just a gearbox factory — we are a full-service power transmission partner. From initial application engineering and 3D prototype modelling through to volume production, global logistics, and after-sales technical support, we manage the complete product lifecycle. Our 29000 m² facility in China is audited annually by international OEM customers and consistently rated among the top-tier suppliers in the agricultural transmission sector.
📞 Get Your EP-RC33 Quote Today
Need the EP-RC33 shipped fast? In-stock standard models dispatch within 3-5 business days. Contact us now to confirm availability and lock in today’s pricing before your next mowing season.
