製品説明
WPDO speed reducer,; worm gear box
| 定格電力 | 2.;0~3.;0kw |
| Output Speed | 23~140rpm |
| Output Torque | 19-2745n.;M |
| Ratio | 1/10~1/60 |
Model NO.;:; WP series Manufacturing Method:; Cast Gear
Toothed Portion Shape:; Spur Gear Type:; Worm and Wormwheel
Gearing Arrangement:; Worm Output Torque:; 19-2745n.;M
Rated Power:; 2.;2~3.;0kw Input Speed:; 1400
Output Speed:; 23~140rpm Place of Origin:; ZHangZhoug,;China
Model Number:; Wpdo Brand Name:; EED
Color:; Green,;Yellow or According to Custom Extra Service:; OEM Welcome!!!
Specification:; SGS,; ISO9001 Origin:; ZHangZhoug,; China
HS Code:; Worm gear box
1.; Widely used in turbines,; shaft liners and axletrees,; good resistance to wearing,; with high precision in dimensions,; lower noise,; advanced centric running castings
2.; Without vent and highly precision
3.; The whole structure is compact and the weight is larger
1.; Notice of installation
1.;1 Thebase-plate must be plane and stoutness,; and the base-plate must be screwed downand shockproof.;
1.;2 Theconnecting shaft of prime mover,; reducer and operation device must be coaxialinstallation.;
1.;3 Thediameter tolerance zone of input and output shaft is H6,; the holes of fittings(such as couplings,; belt-pulley,; sprocket wheel and so on); must properly matethe shaft,; which prevents bearing from breakage because of over-loose mate.;
1.;4 Driverssuch as sprocket wheel and gear must be fitted close to bearings in order toreduce bending stress of hanging shaft.; 1.;5 Whiteassembling motor of WPD reducer,; it is necessary that proper amount of butterapplies to the worm shaft input hole and keyway,; avoiding assembling tootightly and rusting after using for a long time.; 1.;6 WhenOrdering or using all kinds of WPD type,; if the motor weight is binger than thecommon,; supporting set is required.;
2.; Notices of usage
2.;1 Before using,; please check carefully whether the reducer model,; distance,; ratio,; input connecting method,; output shaft structure,; input and output shaftdirection and revolving direction accord with requirement.;
2.;2 According to the requirement of selecting lubricant oil in the productmanual,; please fill proper category and brand lubricant.; And then screw on thevent-plug; Unlock the small cone-plug of vent-plug.; Only after doing these,; reducer is already for starting up running.; The proper brand and adequatelubricant oil is required,; replacing oil in time conforming to the request ofproduct manual is also necessary,; especially after using first 100 hours,; it isrequired refilling new oil.;
2.;3 Whenabnormal circumstances occur,; please stop and check reducer per solutions andreasons for faults of reducer (allowable highest oil temperature is 95,; under this temperature limit,; ifoil temperature no more goes up,; please let reducer continue running);
| 応用： | Motor, Machinery, Agricultural Machinery |
|---|---|
| 硬度： | 硬化した歯面 |
| インストール: | Horizontal Type |
| レイアウト: | 同軸 |
| Gear Shape: | Conical – Cylindrical Gear |
| ステップ： | Single-Step |
| カスタマイズ: |
利用可能
| カスタマイズされたリクエスト |
|---|
Upgrading Your Mower Gearbox for Improved Performance
If you’re looking to enhance the performance of your mower, upgrading the gearbox can be a viable option. Here’s what you should consider:
- Compatibility: Ensure that the upgraded gearbox is compatible with your mower’s make and model. Check for compatibility in terms of mounting, gear ratios, and power requirements.
- Performance Requirements: Identify the specific performance improvements you’re seeking. Whether it’s increased cutting power, improved speed, or better torque, choose a gearbox that aligns with your goals.
- Quality: Opt for a high-quality gearbox from reputable manufacturers. A superior gearbox will not only provide better performance but also greater durability and longevity.
- Professional Installation: Upgrading a gearbox might require technical expertise. Consider seeking professional assistance to ensure proper installation and integration with your mower.
- Cost-Benefit Analysis: Assess the cost of the upgrade against the expected performance gains. A well-calculated decision will help you determine if the upgrade is worth the investment.
- Warranty and Support: Choose an upgraded gearbox that comes with a warranty and reliable customer support. This provides peace of mind in case any issues arise after installation.
- Maintenance Considerations: Understand the maintenance requirements of the upgraded gearbox. Regular maintenance is essential to maintain its performance and longevity.
Upgrading your mower gearbox can indeed lead to improved performance, but it’s important to carefully research and choose the right gearbox for your specific needs. Consulting with experts and considering all factors can help you make an informed decision.
芝刈り機のギアボックスによくある問題とその解決方法
芝刈り機のギアボックスは、時間の経過とともに様々な問題が発生する可能性があります。以下に、よくある問題とその解決策をいくつかご紹介します。
- オイル漏れ： オイル漏れに気づいた場合は、シールとガスケットを点検してください。損傷した部品は交換し、ギアボックスに適切なオイルを補充してください。
- 奇妙な音： 異音はベアリングやギアの摩耗を示している可能性があります。ギアボックスの摩耗状態を点検し、損傷した部品は交換してください。
- 過熱： オイルレベルの低下や過剰な摩擦によって過熱が発生することがあります。オイルレベルと品質を確認し、適切な潤滑を確保してください。
- パフォーマンス不良： 芝刈り機のギアボックスが正常に作動しない場合は、ベルトの緩み、プーリーのずれ、ギアの損傷などを確認してください。必要に応じて部品を調整または交換してください。
- ベルトの滑り： ベルトが滑ると、切断ムラが生じる可能性があります。ベルトの張力を確認し、メーカーの仕様に合わせて調整してください。
- 電力不足： 芝刈り機の出力が不足している場合は、ギアボックスとベルトに異物がないか確認し、ギアが正常に作動していることを確認してください。
- 振動： 過度の振動は、ブレードのバランス不良やギアボックス部品の損傷が原因で発生する可能性があります。ブレードのバランスを調整し、ギアボックスに摩耗がないか点検してください。
- ギアが固着する： ギアが固着した場合は、異物や損傷がないか確認してください。ギアボックスを清掃し、摩耗または損傷した部品は交換してください。
- 摩耗したベアリング： ベアリングが摩耗すると、摩擦が増加し、騒音の原因となります。スムーズな動作を維持するために、摩耗したベアリングは新しいものに交換してください。
- 押収された部品： プーリーやシャフトなどの部品が固着している場合は、損傷や腐食がないか点検してください。必要に応じて、部品に潤滑油を塗布するか、交換してください。
複雑な問題が発生した場合や、修理方法がわからない場合は、芝刈り機の取扱説明書を参照するか、専門の技術者または認定サービスセンターに相談することをお勧めします。
Type of Oil for Mower Gearbox
Choosing the right oil for your mower gearbox is essential for optimal performance and longevity. The specific type of oil you should use depends on the manufacturer’s recommendations and the design of your mower gearbox. Here are the key factors to consider:
- Manufacturer’s Guidelines: Always refer to the manufacturer’s manual or guidelines for the recommended type and viscosity of oil to use in your mower gearbox.
- Viscosity: The viscosity of the oil determines its thickness and ability to flow. Mower gearboxes typically require oils with specific viscosity ratings, such as SAE 80W-90 or SAE 90. These oils provide the right balance of lubrication and protection.
- Extreme Pressure (EP) Properties: Mower gearboxes experience high loads and pressures. Choose an oil labeled as “Extreme Pressure” (EP) as it contains additives that provide extra protection under heavy loads and prevent wear.
- Synthetic vs. Conventional: Synthetic oils offer enhanced performance and stability over a wide range of temperatures. They also provide better protection against heat and oxidation. However, consult the manufacturer’s guidelines to ensure compatibility.
- Usage Conditions: Consider the operating conditions of your mower. If you frequently mow in hot weather or under heavy loads, opt for an oil that can handle these conditions without breaking down.
- Quality: Choose high-quality oils from reputable brands to ensure consistent performance and protection for your mower gearbox.
- Oil Change Intervals: Follow the recommended oil change intervals specified by the manufacturer. Regular oil changes help maintain optimal lubrication and prevent excessive wear.
- Compatibility: Ensure that the oil you choose is compatible with any seals, gaskets, and materials used in your mower gearbox.
Ultimately, using the correct type of oil in your mower gearbox will help maintain smooth operation, reduce friction, and extend the lifespan of the gearbox components.
editor by CX 2023-10-24
