EP-9.279芝刈り機用ギアボックス

EP-9.279芝刈り機用ギアボックス

Dual-rated at 100 HP and 120 HP with selectable 1:1.5 and 1:1 ratios, the EP-9.279 offers unmatched flexibility for high-power mowing. Large-scale pastoral stations and commercial land management firms choose this gearbox to switch between fast finishing and heavy-torque clearing modes without any hardware changes.

商品コード: fe7ce291d51d カテゴリー: タグ: , , , ,

説明


EP-9.279 — Engineered for Australian & Global Farming Conditions

の EP-9.279 から エバーパワー・オーストラリア・モアギアボックス株式会社 ロータリーモアやブラシカッター用途向けに設計された、現場で実績のある直角ギアボックスです。 100 / 120 HP 容量が大きく、強化されたベベルギアにより、季節を問わず、朝から晩まで効率的な操業を維持できます。

EP-9.279 High-Power Rotary Cutter Gearbox

📈 EP-9.279 Technical Specifications

パラメータ 仕様
型番 EP-9.279
ギアボックスタイプ High-Power Rotary Cutter Gearbox
ギア比 1:1.5 / 1:1
歯の形状 27/18, 22/22
ギアモジュール 5.7 / 6
定格電力 100 / 120 HP
入力速度 540回転/分
入力/出力シャフト 1 3/4 Z20
正味重量 38 Kg
ギア素材 20CrMnTi合金鋼、浸炭焼入れ済み、硬度HRC 58-62
ハウジング材 Ductile Cast Iron (QT450-10)
シール保護 マルチリップNBR/FKMオイルシール、IP65+規格準拠
潤滑 SAE 80W-90または85W-140 EPギアオイル
表面処理 Eコートプライマー＋ポリエステル粉体塗装、赤色仕上げ

⭐ 主な特長とエンジニアリング上の利点

💪

Heavy-Duty Triple-Lip Seals + Scraper

Three-lip shaft seals with external scraper rings prevent soil and moisture ingress even during tillage in waterlogged or heavily saturated ground.

⚙

Dedicated Thrust Bearing Stage

Purpose-designed thrust bearings absorb the axial forces generated as tiller blades engage the soil, preventing shaft walk and premature seal extrusion.

⚗

Stainless Steel Breather Valve

Labyrinthed breather prevents pressure build-up during temperature swings while blocking water and dust ingress — a common failure point in cheaper gearboxes.

🔒

CNC-Bored Bearing Seats, IT6 Tolerance

All bearing bores finish-bored to ISO IT6 on CNC horizontal boring mills, ensuring perfect bearing fit and eliminating the fretting corrosion caused by loose seats.

⚡

Laser-Etched Traceability Code

Every housing is laser-marked with a unique serial number linking to full material, heat-treatment, and inspection records for complete supply-chain traceability.

🔄

Balanced Gear Set Assembly

Complete gear sets are dynamically balanced as a matched pair to ISO G6.3, reducing transmitted vibration to the mower frame and extending component fatigue life.

農業用芝刈り機のギアボックス

🔧 機器の互換性と相互参照

🔄 Cross-Reference Compatibility for EP-9.279

The EP-9.279 is engineered as a direct replacement or upgrade for gearboxes fitted to equipment from leading manufacturers including:

McCormick • Mitsubishi • Zoomlion • Case IH • Land Pride • Mahindra • Pöttinger • TAFE

免責事項：上記のブランド名は、互換性確認のためのみに記載されています。Ever-power Australia Mower Gearbox Co.,Ltd.は、記載されているメーカーとは一切提携、承認、または認可を受けていません。すべての商標は、それぞれの所有者に帰属します。

📚 ギアボックス選定ガイド

The correct gearbox specification depends on your tractor, implement, and field conditions. Evaluate these factors for the EP-9.279:

📌 標準カタログ vs カスタム仕様
The EP-9.279 is available as a standard catalog item shipping in 3-5 days. If your application requires a non-standard ratio, shaft type, or mounting configuration, our engineering team offers custom designs with 4-6 week lead times. Minimum order quantities may apply.
📌出力軸タイプの互換性
The EP-9.279 features 1 3/4 Z20 output. Verify your blade hub or implement rotor accepts this shaft type before ordering. We offer multiple output configurations — spline, taper, keyway, and flange — to match virtually any existing installation.
📌重量と取り付けに関する考慮事項
At 38 Kg, the EP-9.279 is designed for large-frame tractor implements and heavy-duty mowers. Confirm your implement frame and three-point hitch can support this weight plus the weight of the blade assembly. Mounting bolt pattern and orientation should match your existing layout.
📌 ギア比とブレード先端速度のマッチング
For the EP-9.279 with ratio(s) 1:1.5 / 1:1, calculate your required blade tip speed: typically 4,500-5,500 m/min for standard rotary cutters, 3,000-4,000 m/min for heavy brush cutting, and 5,500-6,500 m/min for fine finish mowing. Output RPM = PTO RPM ÷ ratio. Multiply by blade diameter to get tip speed.
📌トラクターPTO馬力に対する出力定格の選定
The EP-9.279 is rated at 100 / 120 HP. Always select a gearbox rated at or above your tractor’s maximum PTO horsepower. For shock-load applications (mulching, brush clearing), add a 25-30% safety margin: a 60 HP tractor should use a 75+ HP rated gearbox.

🌾 一般的なアプリケーションシナリオ

🌾 Stubble incorporation and green manure tillage

🚘 Municipal park and recreational reserve mowing

🌱 Silage paddock management and pasture renovation

⛰ Construction site vegetation clearing and preparation

🌳 Roadside and highway verge vegetation management

エバーパワー・オーストラリア・モアギアボックス株式会社の製造施設

🛠 インストールとセットアップガイド

  1. ギアボックスをマウントスタッドまたはボルト穴に配置し、入力シャフトがトラクターのPTOに面し、出力シャフトがブレードハブまたはローターと一直線になっていることを確認します。
  2. PTOシャフトは、すべての動作位置において、少なくとも50%のスプライン重なりを確保してください。重なりが不十分な場合、スプラインの摩耗が急速に進み、シャフトが分離する可能性があります。
  3. Record the installation date, tractor hour meter reading, and gearbox serial number in your maintenance log for warranty and service interval tracking.
  4. If replacing an existing unit, drain the old oil completely, remove mounting fasteners, and carefully lower the old gearbox. Photograph the orientation and note any shim washers used.
  5. Insert all mounting bolts finger-tight first, then torque to specification in a cross (star) pattern to ensure even clamping. Typical torque: 80-120 Nm depending on bolt size.
  6. With the implement raised and blades clear of the ground, engage the PTO at low idle speed. Listen for any unusual noise and observe for vibration or oil leaks.
  7. Verify that the mower implement safety chain or restraint is properly connected to prevent the gearbox from contacting the ground if the three-point hitch fails.

❓よくある質問

❓ 純正OEM部品と比較して、御社の価格設定はどうですか？

当社のギアボックスは、純正品と同等またはそれ以上の素材を使用しながら、通常30～50%の低価格を実現しています。独立機関による試験では、同等以上の性能と耐用年数が確認されています。車両運行事業者にとって、大きなコスト削減につながります。

❓ このギアボックスにはどのようなギアオイルの規格が必要ですか？

通常の使用条件下では、SAE 80W-90またはSAE 85W-140 GL-5極圧ギアオイルを使用してください。-20℃以下の極寒地では、合成油の75W-90を使用することで、低温始動時の適切な流動性を確保できます。シフト交代前には必ずサイトグラスまたはオイルレベルゲージでオイルレベルを確認してください。

❓ どのトラクターブランドが互換性がありますか？

当社のギアボックスは、標準的なPTO接続部（1 3/8インチ6スプラインまたは1 3/4インチ20スプライン）を使用しており、ジョンディア、クボタ、マッセイファーガソン、ニューホランド、ケースIH、キオティ、マヒンドラなど、ほぼすべてのブランドと互換性があります。

❓ このギアボックスは動作中にどれくらい騒音が出ますか？

当社のスパイラルベベル設計は、定格負荷時において1メートル離れた場所で72～78dB(A)の騒音レベルを実現しており、ストレートベベル設計（通常82～88dB）に比べて大幅に静音化されています。作業者はギアノイズの著しい低減を実感できます。

❓ What is the difference between ratio options?

Ratio determines the speed/torque trade-off at the output. 1:1 maintains PTO speed (high blade RPM); 1:1.93 nearly halves output speed while doubling torque. Choose based on your target blade tip speed and vegetation density.

⭐ お客様の声と現場レポート

★★★★★

📍 South Australia, Australia

Running in extreme cold (-25 °C) winters and hot summers. Synthetic oil in this gearbox handles both extremes without issue.

★★★★★

📍 Faisalabad, Pakistan

We replaced three OEM gearboxes with this model across our fleet. Gear quality and seal performance are noticeably superior. Reordering for next season.

★★★★★

📍 Poltava, Ukraine

Third year of heavy use on our paddock clearing. Still going strong with just regular oil changes. The best aftermarket gearbox I have found.

★★★★☆

📍 Córdoba, Argentina

Good gearbox with a solid, hefty feel. Delivery to Argentina was fast. Only needed a small spacer washer to fit our older mower model.

★★★★☆

📍 Bordeaux, France

Handles our tropical conditions well — humidity and monsoon rain. This gearbox just keeps working without fuss.

農業用ギアボックスシリーズ

⚖ EP-9.279 vs. Low-Cost Alternatives

特徴 EP-9.279 (Ever-power) ジェネリック／低価格代替品
Oil Level Check ✔ Clear Sight Glass + Dipstick Standard ✘ No Sight Glass, Must Remove Fill Plug
After-Sales Support ✔ Dedicated Technical Team, Video Call Support ✘ Email Only, 1-2 Week Response Time
Engineering Support ✔ Free Application Engineering & Cross-Reference ✘ No Technical Support Provided
Oil Seals ✔ Double-Lip NBR/FKM, IP65 Rated ✘ Single-Lip NBR, No Dust Lip
Dimensional Tolerance ✔ ISO IT6-IT7, CNC Machined Throughout ✘ ISO IT9-IT10, Partially Hand-Finished
Documentation ✔ Full Drawings, Cross-Reference, Install Guide ✘ Basic Single-Page Spec Sheet Only
Fastener Protection ✔ Zinc-Flake Coated Grade 10.9 Bolts ✘ Plain Steel Grade 8.8, Corrodes and Seizes

🔄関連商品・アクセサリー

🏆 認証と品質基準

Quality assurance is embedded in every step of EP-9.279 production, certified to ISO 9001:2015 standards. All forged gear blanks are ultrasonically inspected per ASTM A388 to ensure zero internal defects. Finished gears are checked on Gleason analyzers for profile, lead, pitch, and runout accuracy. Each assembled unit is run-tested at rated speed before release.

🏭 Ever-power Australia Mower Gearbox Co.,Ltd.を選ぶ理由とは？

Ever-power Australia Mower Gearbox Co.,Ltd. was founded with a simple mission: give farmers worldwide access to durable, fairly priced power transmission components. Today, our vertically integrated operation — from raw steel procurement to finished-product testing — processes over 4800 tonnes of alloy steel annually. Our ISO 9001:2015-certified factory employs 295 skilled technicians and engineers, each contributing to our industry-leading 98.5% on-time delivery rate and less than 0.3% field return rate.

PTO駆動シャフト

📞 Get Your EP-9.279 Quote Today

Whether you need a single EP-9.279 replacement or a container load for your production line, we deliver. Reach out to our sales team for volume pricing and priority lead times.

見積もりを依頼する全商品を見る

関連商品