Description
EP-9.279 — Engineered for Australian & Global Farming Conditions
Itu EP-9.279 dari Ever-power Australia Mower Gearbox Co.,Ltd. adalah gearbox sudut kanan yang telah teruji di lapangan, dirancang untuk aplikasi mesin pemotong rumput putar dan pemotong semak. 100 / 120 HP Kapasitas dan roda gigi bevel yang diperkeras menjaga operasi Anda tetap berjalan efisien dari pagi hingga sore, musim demi musim.
📈 EP-9.279 Technical Specifications
| Parameter | Spesifikasi |
|---|---|
| Nomor Model | EP-9.279 |
| Jenis Gearbox | High-Power Rotary Cutter Gearbox |
| Rasio Gigi | 1:1.5 / 1:1 |
| Konfigurasi Gigi | 27/18, 22/22 |
| Modul Gigi | 5.7 / 6 |
| Daya Terukur | 100 / 120 HP |
| Kecepatan Masukan | 540 rpm |
| Poros Masukan/Keluaran | 1 3/4 Z20 |
| Berat Bersih | 38 Kg |
| Bahan Gigi | Baja Paduan 20CrMnTi, Dikarburisasi & Dikeraskan HRC 58-62 |
| Bahan Perumahan | Ductile Cast Iron (QT450-10) |
| Perlindungan Segel | Segel Oli Multi-Bibir NBR/FKM, Peringkat IP65+ |
| Pelumasan | Oli roda gigi SAE 80W-90 atau 85W-140 EP |
| Perawatan Permukaan | Primer E-Coat + Lapisan Serbuk Poliester, Warna Merah |
⭐ Fitur Utama & Keunggulan Teknik
💪
Heavy-Duty Triple-Lip Seals + Scraper
Three-lip shaft seals with external scraper rings prevent soil and moisture ingress even during tillage in waterlogged or heavily saturated ground.
⚙
Dedicated Thrust Bearing Stage
Purpose-designed thrust bearings absorb the axial forces generated as tiller blades engage the soil, preventing shaft walk and premature seal extrusion.
⚗
Stainless Steel Breather Valve
Labyrinthed breather prevents pressure build-up during temperature swings while blocking water and dust ingress — a common failure point in cheaper gearboxes.
🔒
CNC-Bored Bearing Seats, IT6 Tolerance
All bearing bores finish-bored to ISO IT6 on CNC horizontal boring mills, ensuring perfect bearing fit and eliminating the fretting corrosion caused by loose seats.
⚡
Laser-Etched Traceability Code
Every housing is laser-marked with a unique serial number linking to full material, heat-treatment, and inspection records for complete supply-chain traceability.
🔄
Balanced Gear Set Assembly
Complete gear sets are dynamically balanced as a matched pair to ISO G6.3, reducing transmitted vibration to the mower frame and extending component fatigue life.
🔧 Kompatibilitas dan Referensi Silang Peralatan
🔄 Cross-Reference Compatibility for EP-9.279
The EP-9.279 is engineered as a direct replacement or upgrade for gearboxes fitted to equipment from leading manufacturers including:
McCormick • Mitsubishi • Zoomlion • Case IH • Land Pride • Mahindra • Pöttinger • TAFE
Penafian: Nama merek di atas hanya dirujuk untuk identifikasi kompatibilitas. Ever-power Australia Mower Gearbox Co.,Ltd. tidak berafiliasi dengan, didukung oleh, atau diotorisasi oleh produsen mana pun yang tercantum. Semua merek dagang milik pemiliknya masing-masing.
📚 Panduan Pemilihan Transmisi
The correct gearbox specification depends on your tractor, implement, and field conditions. Evaluate these factors for the EP-9.279:
🌾 Skenario Aplikasi Umum
🌾 Stubble incorporation and green manure tillage
🚘 Municipal park and recreational reserve mowing
🌱 Silage paddock management and pasture renovation
⛰ Construction site vegetation clearing and preparation
🌳 Roadside and highway verge vegetation management
🛠 Panduan Instalasi & Pengaturan
- Position the gearbox onto the mounting studs or bolt holes, verifying the input shaft faces the tractor PTO and the output shaft aligns with the blade hub or rotor.
- Ensure the PTO shaft has at least 50% spline overlap in all operating positions. Inadequate overlap causes rapid spline wear and potential shaft separation.
- Record the installation date, tractor hour meter reading, and gearbox serial number in your maintenance log for warranty and service interval tracking.
- If replacing an existing unit, drain the old oil completely, remove mounting fasteners, and carefully lower the old gearbox. Photograph the orientation and note any shim washers used.
- Insert all mounting bolts finger-tight first, then torque to specification in a cross (star) pattern to ensure even clamping. Typical torque: 80-120 Nm depending on bolt size.
- Dengan alat terangkat dan mata pisau tidak menyentuh tanah, aktifkan PTO pada kecepatan idle rendah. Dengarkan apakah ada suara yang tidak biasa dan amati apakah ada getaran atau kebocoran oli.
- Pastikan rantai pengaman atau penahan alat pemotong rumput terhubung dengan benar untuk mencegah kotak roda gigi menyentuh tanah jika sambungan tiga titik gagal.
❓ Pertanyaan yang Sering Diajukan
⭐ Ulasan Pelanggan & Laporan Lapangan
Dave R.
★★★★★
📍 South Australia, Australia
Running in extreme cold (-25 °C) winters and hot summers. Synthetic oil in this gearbox handles both extremes without issue.
Ahmed K.
★★★★★
📍 Faisalabad, Pakistan
We replaced three OEM gearboxes with this model across our fleet. Gear quality and seal performance are noticeably superior. Reordering for next season.
Oleksiy H.
★★★★★
📍 Poltava, Ukraine
Third year of heavy use on our paddock clearing. Still going strong with just regular oil changes. The best aftermarket gearbox I have found.
Carlos R.
★★★★☆
📍 Córdoba, Argentina
Good gearbox with a solid, hefty feel. Delivery to Argentina was fast. Only needed a small spacer washer to fit our older mower model.
Pierre L.
★★★★☆
📍 Bordeaux, France
Handles our tropical conditions well — humidity and monsoon rain. This gearbox just keeps working without fuss.
⚖ EP-9.279 vs. Low-Cost Alternatives
| Fitur | EP-9.279 (Ever-power) | Alternatif Generik / Murah |
|---|---|---|
| Oil Level Check | ✔ Clear Sight Glass + Dipstick Standard | ✘ No Sight Glass, Must Remove Fill Plug |
| After-Sales Support | ✔ Dedicated Technical Team, Video Call Support | ✘ Email Only, 1-2 Week Response Time |
| Engineering Support | ✔ Free Application Engineering & Cross-Reference | ✘ No Technical Support Provided |
| Oil Seals | ✔ Double-Lip NBR/FKM, IP65 Rated | ✘ Single-Lip NBR, No Dust Lip |
| Dimensional Tolerance | ✔ ISO IT6-IT7, CNC Machined Throughout | ✘ ISO IT9-IT10, Partially Hand-Finished |
| Documentation | ✔ Full Drawings, Cross-Reference, Install Guide | ✘ Basic Single-Page Spec Sheet Only |
| Fastener Protection | ✔ Zinc-Flake Coated Grade 10.9 Bolts | ✘ Plain Steel Grade 8.8, Corrodes and Seizes |
🔄 Produk & Aksesoris Terkait
Browse our complete range of agricultural transmission components including PTO shafts, gears, pulleys, chains, and sprockets — all engineered to integrate seamlessly with EP-9.279 gearboxes.
🏆 Certifications & Quality Standards
Quality assurance is embedded in every step of EP-9.279 production, certified to ISO 9001:2015 standards. All forged gear blanks are ultrasonically inspected per ASTM A388 to ensure zero internal defects. Finished gears are checked on Gleason analyzers for profile, lead, pitch, and runout accuracy. Each assembled unit is run-tested at rated speed before release.
🏭 Why Choose Ever-power Australia Mower Gearbox Co.,Ltd.?
Ever-power Australia Mower Gearbox Co.,Ltd. was founded with a simple mission: give farmers worldwide access to durable, fairly priced power transmission components. Today, our vertically integrated operation — from raw steel procurement to finished-product testing — processes over 4800 tonnes of alloy steel annually. Our ISO 9001:2015-certified factory employs 295 skilled technicians and engineers, each contributing to our industry-leading 98.5% on-time delivery rate and less than 0.3% field return rate.
📞 Get Your EP-9.279 Quote Today
Whether you need a single EP-9.279 replacement or a container load for your production line, we deliver. Reach out to our sales team for volume pricing and priority lead times.
