제품 설명
Company Profiles
ZHangZhoug Xihu (West Lake) Dis.hai Reducer is a leading manufacturer of gear motor and gearbox.
Since 1991, we have specialized in manufacturing a wide range of gear motor and gear box including:
- helical gear motor
- helical bevel gear motor
- parallel shaft helical gear motor
- helical worm gear motor
- hoist drive
- heavy-duty helical gearbox
- heavy-duty helical bevel gearbox
- gear motor for car parking system
- sprial bevel gearbox
제품 설명
제품 설명
E series gear motor is combined with helical gear and worm gear. It is 90° for input and output shaft.
Mounting position: footed mounting, flange mounting and shaft mounting etc.
Technical data:
Output speed:0.12~397rpm
Rated output torque:10~4200N*m
Motor power: 0.12~22KW
Product Parameters
| Product features | |||||||
| 1. Economical operation, low noise and high permitted overhung loads. | |||||||
| 2. Due to their outstanding efficiency, these drives can be used in every industrial sector and tailored to individual torque and speed requirements. | |||||||
| General Technical data | |||||||
| Housing material | HT250 high-strength cast iron | ||||||
| Housing hardness | HBS190-240 | ||||||
| Pinion material | 20CrMnTiH | ||||||
| Gear material | 20CrMnTiH | ||||||
| Surface hardness of gears | HRC58°~62 ° | ||||||
| Gear core hardness | HRC33~40 | ||||||
| Input /output shaft material | 40CrMnTiH | ||||||
| Input / Output shaft hardness | HRC25~30 | ||||||
| Machining precision of gears | accurate grinding, 6~7 Grade | ||||||
| Lubricating oil | GB L-CKC220 | ||||||
| Heat treatment | tempering, cementiting, quenching, etc. | ||||||
| Efficiency | 94%~96% (depends on the transmission stage) | ||||||
| Noise (MAX) | 60~68dB | ||||||
| Temp. rise (MAX) | 40°C | ||||||
| Temp. rise (Oil)(MAX) | 50°C | ||||||
| Vibration | ≤20µm | ||||||
| 백래시 | ≤20Arcmin | ||||||
| Brand of bearings | China Top brand C&U,LYC,TMB or other brands requested, | ||||||
| Brand of oil seal | CTY— ZheJiang or other brands requested | ||||||
| E —- series helical-worm gear motor | |||||||
| S-series single stages | |||||||
| Model | 출력축 직경 | Center Height | Output Flange Dia. | Power | Ratio | Permitted Torque | Output Speed |
| Solid (mm) | (mm) | (mm) | (kw) | (Nm) | (RPM) | ||
| E37 | 20k6 | 80j6 | 80/120 | 0.12~1.5 | 6.72~160 | 105 | 8.4~397 |
| E47 | 25k6 | 100j6 | 110/160 | 0.12~1.5 | 7.5~212 | 190 | 6.6~192 |
| E57 | 30k6 | 112j6 | 130/200 | 0.18~3.0 | 7.5~212 | 340 | 6.5~194 |
| E67 | 35k6 | 140j6 | 130/200 | 0.25~5.5 | 7.45~215 | 565 | 6~189 |
| E77 | 45k6 | 180j6 | 180/250 | 0.37~7.5 | 7.9~257 | 1200 | 3.5~177 |
| E87 | 60m6 | 225h6 | 250/350 | 0.55~15 | 8.52~277 | 2600 | 1.0~171 |
| E97 | 70m6 | 280h6 | 350/450 | 1.5~22 | 8.26~282 | 4185 | 4.9~177 |
| E- series double stages | |||||||
| Model | 출력축 직경 | Center Height | Output Flange Dia. | Power | Ratio | Permitted Torque | Output Speed |
| Solid (mm) | (mm) | (mm) | (kw) | (Nm) | (RPM) | ||
| E37D17 | 20k6 | 80j13 | 80/120 | 0.12 | 110~202 | 89 | 6.8~13 |
| E47D17 | 25k6 | 100j13 | 110/160 | 0.12~0.18 | 180~438 | 255 | 3.2~7.4 |
| E57D17 | 30k6 | 112j13 | 130/200 | 0.12~0.25 | 131~655 | 311 | 2.1~9.9 |
| E67D37 | 35k6 | 140j13 | 130/200 | 0.12~0.37 | 246~1363 | 600 | 1.0~5.6 |
| E77D37 | 45k6 | 180j13 | 180/250 | 0.12~1.1 | 219~3540 | 1230 | 0.39~6.4 |
| E87D57 | 60m6 | 225h13 | 250/350 | 0.12~1.5 | 205~7643 | 2810 | 0.18~6.9 |
| E97D57 | 70m6 | 280h13 | 350/450 | 0.12~3.0 | 179~11267 | 4420 | 0.12~7.7 |
회사 소개
ZHangZhoug Xihu (West Lake) Dis.hai Reducer Co., LTD is professionally manufacturing gear motor and gear box, with more than 20+years experience,
And an industrial and trading company have been set up in ZheJiang , known as “ZheJiang Teguosi Transmission Equipment Co., Ltd”, and shorten as ” DHC•TGS”, mainly researching and developing high-quality transmission equipment, providing complete sets of equipment for the global intelligent industry in accordance with European standards, National standards and Enterprise standards.
Our products had been Certified by CE,CCC,CQC,XT.
As a leading brand of domestic transmission equipment, it is also a National High-tech Enterprise, a director of the China Heavy Machinery Industry Association, and a Parking Equipment Working Committee and a Bridge Crane Professional Committee.
Your reliable supplier ,we assure you the utmost reliability and security for both product and services
Our Advantages
Our Advantages: Your professional supplier with 20+years experience
Widely Used In Different Industries
Package
Plastic bag + wooden carton
자주 묻는 질문
자주 묻는 질문
1.Q:What kinds of gearbox can you produce for us?
A:Main products of our company: E, D, T, and P series helical gear motor and
hoist drive
heavy-duty helical gearbox
heavy-duty helical bevel gearbox
gear motor for car parking system
sprial bevel gearbox
more than 1 hundred models and thousands of specifications
2.Q: How long is your delivery time?
A:Generally it is 5-10 days if the parts are in stock. or it is 15-40 days if the parts are not in stock.
3.Q: What is your MOQ?
A:1 Set
4.Q: :Can you make as per custom drawing?
A:Yes, we offer customized service for customers.
If you have any demand for our products please feel free to contact me. /* 2571년 1월 22일 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| 애플리케이션: | Motor, Machinery, Transmission Equipment |
|---|---|
| 경도: | 경화된 치아 표면 |
| 설치: | Horizontal Type |
| 공들여 나열한 것: | Shunting |
| Gear Shape: | Bevel |
| 단계: | Three-Step |
잔디깎이 기계 기어박스 작업 시 안전 수칙
잔디깎이 기계의 기어박스를 다룰 때는 사고와 부상을 예방하기 위해 안전에 각별히 주의해야 합니다. 다음 안전 수칙을 준수하십시오.
- 전원을 차단하세요: 정비나 조정을 하기 전에 잔디깎이의 엔진을 끄고 점화 플러그 배선을 분리하여 오작동으로 인한 시동을 방지하십시오.
- 식을 때까지 기다리세요: 변속기는 작동 중에 뜨거워질 수 있으므로 작동 후에는 식혀주십시오.
- 보호 장비를 착용하세요: 파편과 움직이는 부품으로부터 자신을 보호하기 위해 장갑, 보안경, 앞코가 막힌 신발과 같은 적절한 개인 보호 장비(PPE)를 착용하십시오.
- 잔디깎이 기계를 안정시키세요: 기어박스 작업을 시작하기 전에 잔디깎이 기계가 평평한 곳에 놓여 있고 제대로 고정되어 있는지 확인하십시오.
- 설명서를 읽으십시오: 기어박스 유지보수와 관련된 구체적인 안전 지침 및 절차는 잔디깎이 사용 설명서를 참조하십시오.
- 올바른 도구를 사용하십시오: 작업에 맞는 올바른 도구를 항상 사용하고, 도구가 양호한 상태인지 확인하십시오. 부적절한 도구를 사용하면 사고와 손상이 발생할 수 있습니다.
- 헐렁한 옷은 피하세요: 몸에 잘 맞고 움직이는 부분에 걸릴 위험이 없는 옷을 입으세요.
- 손대지 마세요: 엔진이 작동 중이거나 정비 작업을 하는 동안에는 손과 손가락을 기어박스 및 벨트에서 멀리하십시오.
- 적절하게 환기하세요: 밀폐된 공간에서 작업하는 경우 배기가스에 노출되지 않도록 적절한 환기를 확보하십시오.
- 한 번에 한 가지씩: 한 번에 한 가지 작업에 집중하세요. 잔디깎이 기계 기어박스를 수리할 때는 주의를 산만하게 하는 요소나 멀티태스킹을 피하십시오.
- 깨끗한 작업 공간을 유지하십시오: 작업 공간을 깨끗하고 정돈된 상태로 유지하여 넘어짐 사고를 예방하고 도구를 쉽게 사용할 수 있도록 하십시오.
- 보호대 및 덮개를 교체하십시오: 정비를 마친 후에는 잔디깎이 기계를 작동하기 전에 모든 보호 장치와 덮개가 제대로 재설치되었는지 확인하십시오.
- 액체류는 올바르게 처리하십시오: 변속기에서 유체를 배출해야 하는 경우, 해당 지역 규정에 따라 폐기하십시오.
- 전문가의 도움을 받으세요: 유지 보수나 수리에 대해 확신이 서지 않거나, 작업에 전문적인 지식이 필요한 경우 전문가 또는 공인 서비스 센터에 문의하십시오.
이러한 안전 수칙을 준수하면 잔디깎이 기계의 기어박스를 안전하고 효율적으로 다룰 수 있으며, 사고 및 부상 위험을 줄일 수 있습니다.
Troubleshooting Strange Noises from a Mower Gearbox
If you hear strange noises coming from your mower gearbox, follow these steps to troubleshoot the issue:
- Identify the Noise: Determine the type of noise, such as grinding, squealing, or knocking. Different noises can indicate various problems.
- Check Lubrication: Insufficient or contaminated lubrication can cause unusual noises. Check the gearbox’s oil level and condition and replace it if necessary.
- Inspect Gears and Bearings: Worn, damaged, or misaligned gears and bearings can generate noise. Inspect these components for wear, chipping, or misalignment.
- Tighten Fasteners: Loose bolts and fasteners can lead to vibration and noise. Check and tighten all fasteners connecting the gearbox to the mower.
- Check Belt Tension: A loose or misaligned drive belt can cause noise. Adjust the belt tension according to the manufacturer’s guidelines.
- Inspect Clutch Components: If your mower has a clutch, worn or damaged clutch components can create noise. Inspect the clutch assembly for any issues.
- Examine Blade Components: If the noise is related to blade engagement, check the blade assembly for damage, alignment, and balance.
- Clean Debris: Debris, dirt, and grass clippings can accumulate in the gearbox and cause noise. Clean the gearbox thoroughly and remove any obstructions.
- 전문가의 도움을 받으세요: If you can’t identify or fix the issue, consult a professional technician or service center for diagnosis and repair.
Regular maintenance and prompt identification of unusual noises can help prevent further damage and ensure the smooth operation of your mower gearbox.
Key Components of a Mower Gearbox
A mower gearbox is a complex mechanical assembly consisting of various components that work together to transmit power and control the cutting blades. The key components of a mower gearbox include:
- Input Shaft: The input shaft is connected to the mower’s engine via a drive shaft. It receives the rotational power from the engine and transfers it to the gearbox.
- Gears: Gears are essential components responsible for transmitting and converting torque and speed. Mower gearboxes contain a set of gears, including input gears, intermediate gears, and output gears, that mesh together to achieve the desired torque and speed ratios.
- Output Shaft: The output shaft is connected to the cutting blades. It receives the torque from the gearbox and transfers it to the blades, causing them to rotate and perform the cutting action.
- Bearings: Bearings support the rotating shafts and gears within the gearbox, reducing friction and ensuring smooth movement. Ball bearings or roller bearings are commonly used to enhance the gearbox’s efficiency and longevity.
- Lubrication System: Mower gearboxes require proper lubrication to minimize friction and wear between moving parts. Lubrication ensures that the gears and bearings operate smoothly and efficiently.
- Housing: The gearbox housing encloses and protects the internal components from external elements. It also contains the lubricating oil and prevents dirt and debris from entering the gearbox.
- Seals: Seals prevent the entry of contaminants such as water, dust, and dirt into the gearbox. They play a critical role in maintaining the integrity of the lubrication system and protecting the internal components.
- Clutches and Brakes: Some mower gearboxes feature clutches and brakes that allow for engagement and disengagement of the cutting blades. These components provide control over the cutting action and enable safe operation.
- Adjustment Mechanisms: Depending on the type of mower, the gearbox may include adjustment mechanisms for setting the cutting height or angle of the blades. These mechanisms enhance the mower’s versatility and performance.
The combination of these components within the mower gearbox ensures the effective transmission of power and precise control over the cutting blades, resulting in efficient and accurate mowing operations.
editor by CX 2024-05-16
