EP-X30 Lawn Mower Gearbox

EP-X30 Lawn Mower Gearbox

The EP-X30 packs three gear ratios (1:1.47, 1:1.69, 1:1.93) into a compact 26.5 kg body rated at 35 HP. Versatility-focused operators — from market gardeners to rural fire brigades — choose the X30 to adapt one gearbox to different implements and cutting conditions throughout the year.

SKU: fecac74c0bc2 Category: Tags: , , , ,

Beschrijving


EP-X30 — The Operator’s Choice in Compact Rotary Cutter Gearbox Technology

Trusted by professional farmers and contractors worldwide, the EP-X30 versnellingsbak van de maaier combines 35 / 35 / 30 HP capacity with robust 26.5 Kg cast construction. Available in 1:1.47 / 1:1.69 / 1:1.93 ratio configurations, it adapts to your mowing conditions with ease.

EP-X30 Compact Rotary Cutter Gearbox

📈 EP-X30 Technical Specifications

Parameter Specificatie
Modelnummer EP-X30
Versnellingsbaktype Compact Rotary Cutter Gearbox
Overbrengingsverhouding(en) 1:1.47 / 1:1.69 / 1:1.93
Tandconfiguratie 15/22, 13/22, 15/29
Versnellingsbakmodule 5.08 / 5.0 / 4.0
Nominaal vermogen 35 / 35 / 30 HP
Invoersnelheid 540 toeren per minuut
Invoer-/uitvoeras 1 3/8 Z6, Optic axis, Cone base aequilate spline shaft
Nettogewicht 26.5 Kg
Tandwielmateriaal 20CrMnTi gelegeerd staal, gecarburiseerd en gehard HRC 58-62
Behuizingsmateriaal Grijs gietijzer (HT200/HT250)
Verzegeling Bescherming Meervoudige NBR/FKM-oliekeerringen, IP65+-geclassificeerd
Smering SAE 80W-90 of 85W-140 EP tandwielolie
Oppervlaktebehandeling E-coat primer + polyester poedercoating, rode afwerking

⭐ Belangrijkste kenmerken en technische voordelen

⚙

AISI 9310 vliegtuigkwaliteit tandwielen

Vacuümgeharde, cryogeen behandelde tandwielen met een hardheid van HRC 62-65 en een buigzame kern – dezelfde metaalbewerking als die gebruikt wordt in tandwielen voor helikoptertransmissies.

⚗

99% piekrendement, AGMA klasse 12

Superfijne tanden, geslepen tot ≤ 0,2 μm Ra met toonaangevende precisie, die kracht overbrengen met vrijwel geen wrijvingsverlies bij nominale snelheid en belasting.

🔒

Hypoid Gear Precision Set

High-precision hypoid gears from 20MnCr5 steel, carburized and ground to AGMA Class 9, for smooth and quiet power transfer inside disc mower hubs.

⚡

Concentric Blade-Mount Hub

Precision-machined pilot diameter and balanced bolt circle ensure vibration-free disc rotation, maintaining uniform cutting height across the full mower bar width.

🔄

Custom-Angle Bevel Tooth Geometry

Non-standard bevel angles CNC-cut for unique shaft orientations, enabling implement designs that standard 90° gearboxes cannot accommodate.

🔨

Application-Tuned Non-Standard Ratio

Gear ratio calculated specifically for target output RPM and torque, matched to the precise blade speed requirements of the intended mowing/mulching implement.

Versnellingsbak van een maaier voor agrarisch gebruik

🔧 Compatibiliteit en kruisverwijzing van apparatuur

🔄 Cross-Reference Compatibility for EP-X30

The EP-X30 is engineered as a direct replacement or upgrade for gearboxes fitted to equipment from leading manufacturers including:

Foton • Kubota • Claas • Schulte • Kuhn • SaMASZ • Swaraj • TYM

Disclaimer: De bovenstaande merknamen worden uitsluitend vermeld ter identificatie van de compatibiliteit. Ever-power Australia Mower Gearbox Co.,Ltd. is niet gelieerd aan, onderschreven door of geautoriseerd door een van de vermelde fabrikanten. Alle handelsmerken behoren toe aan hun respectievelijke eigenaren.

📚 Gids voor het kiezen van een versnellingsbak

Getting gearbox selection right the first time saves money and headaches. Here is a systematic approach to specifying the EP-X30:

📌 Cast Iron Housing vs Aluminium Housing
The EP-X30 uses a grey cast iron housing. Cast iron excels in vibration damping, impact resistance, and heat dissipation — ideal for rough, rocky mowing conditions. Aluminium is lighter and more corrosion-resistant, better suited to wet environments and weight-sensitive implements.
📌 Standard Catalog vs Custom Specification
The EP-X30 is available as a standard catalog item shipping in 3-5 days. If your application requires a non-standard ratio, shaft type, or mounting configuration, our engineering team offers custom designs with 4-6 week lead times. Minimum order quantities may apply.
📌 Compatibiliteit van het type uitgaande as
The EP-X30 features 1 3/8 Z6, Optic axis, Cone base aequilate spline shaft output. Verify your blade hub or implement rotor accepts this shaft type before ordering. We offer multiple output configurations — spline, taper, keyway, and flange — to match virtually any existing installation.
📌 Gewicht en montageoverwegingen
At 26.5 Kg, the EP-X30 is designed for compact and sub-compact tractor implements. Confirm your implement frame and three-point hitch can support this weight plus the weight of the blade assembly. Mounting bolt pattern and orientation should match your existing layout.
📌 Afstemming van de overbrengingsverhouding op de snelheid van de bladpunt
For the EP-X30 with ratio(s) 1:1.47 / 1:1.69 / 1:1.93, calculate your required blade tip speed: typically 4,500-5,500 m/min for standard rotary cutters, 3,000-4,000 m/min for heavy brush cutting, and 5,500-6,500 m/min for fine finish mowing. Output RPM = PTO RPM ÷ ratio. Multiply by blade diameter to get tip speed.

🌾 Typische toepassingsscenario's

🌾 Silage paddock management and pasture renovation

🚘 Construction site vegetation clearing and preparation

🌱 Roadside and highway verge vegetation management

⛰ Pipeline and powerline easement clearing

🌳 Riparian zone and waterway bank vegetation control

Ever-power Australia Mower Gearbox Co.,Ltd. productiefaciliteit

🛠 Installatie- en configuratiehandleiding

  1. With the implement raised and blades clear of the ground, engage the PTO at low idle speed. Listen for any unusual noise and observe for vibration or oil leaks.
  2. Verify that the mower implement safety chain or restraint is properly connected to prevent the gearbox from contacting the ground if the three-point hitch fails.
  3. Apply a thin, even bead of RTV silicone sealant to the mounting flange face if a pre-cut gasket is not included with the new gearbox.
  4. Connect the PTO drive shaft to the gearbox input spline. Push the shaft on fully and verify it telescopes freely through the complete range of three-point hitch travel.
  5. After the first 10 hours of operation, re-torque all mounting bolts to specification and verify oil level. Perform the first oil drain and refill at 50 hours.
  6. Disconnect the tractor PTO shaft and safely support the mower implement on jack stands or blocks before beginning the gearbox installation procedure.
  7. Voor units die meer dan 25 kg wegen, gebruik een kettingtakel, motortakel of een hijsinstallatie met twee personen om de versnellingsbak te positioneren. Probeer nooit zware versnellingsbakken in je eentje te tillen.

❓ Veelgestelde vragen

❓ What is the expected operational lifespan?

With proper maintenance, our gearboxes typically deliver 3,000 to 5,000 operating hours. Many units in the field have exceeded 6,000 hours. Lifespan depends on operating load, maintenance compliance, and field conditions.

❓ Is this suitable for mulching applications?

Yes. Our gearboxes are widely used on mulching mowers and brush cutters. For mulching, select a model rated 25-30% above your actual PTO horsepower to provide a safety margin against the intermittent shock loads typical of mulching.

❓ What quality inspections do you perform?

Every gearbox undergoes 100% dimensional inspection (CMM), gear tooth geometry verification (Gleason analyzer), hardness testing, oil-leak testing, and no-load run-in testing before shipment.

❓ What warranty do you provide?

Every gearbox ships with a 12-month warranty covering material and workmanship defects under normal operating conditions. Warranty claims are handled through our dealer network with replacement units dispatched within 48 hours of approval.

❓ How do I determine the correct model for my mower?

You need four pieces of information: (1) tractor PTO HP, (2) PTO speed (540 or 1000 RPM), (3) current gearbox mounting dimensions, and (4) output shaft type. Send us these details and we will cross-reference the best match.

⭐ Klantenrecensies en praktijkverslagen

★★★★★

📍 Queensland, Australië

Bolt pattern matched my slasher perfectly. Quieter than the original gearbox it replaced and the oil stays clean much longer between changes.

★★★★★

📍 Córdoba, Argentina

Installed on our pasture topper for sugarcane/crop field work. Oil seal quality is excellent — no leakage despite dusty and humid conditions.

★★★★★

📍 Bordeaux, France

We run these on pasture maintenance in high-temperature conditions. Absolutely no overheating after 600+ hours. Thermals are well managed.

★★★★☆

📍 Adana, Turkey

Perfect for our roadside mowing. The compact design fits between rows with room to spare. Very reliable day-to-day operation.

★★★★☆

📍 Saskatchewan, Canada

Good quality for the price. Our crew runs these gearboxes hard and they hold up better than previous brands we have tried.

Assortiment landbouwversnellingsbakken

⚖ EP-X30 vs. Low-Cost Alternatives

Functie EP-X30 (Ever-power) Generiek / Goedkoop alternatief
Quality Testing ✔ 100% Factory Tested — Dimensional, Run-In, Leak ✘ Spot-Checked, Minimal QC Documentation
Gear Balancing ✔ Matched-Pair Dynamic Balance to ISO G6.3 ✘ No Balancing Performed
Shaft Hardness ✔ Output Journals Induction-Hardened HRC 50-55 ✘ No Localized Hardening, Rapid Wear
Shipping Protection ✔ Wooden Crate, VCI Paper, Foam Inserts ✘ Cardboard Box, Minimal Protection
Corrosion Protection ✔ E-Coat + Powder Coat + Zinc Fasteners ✘ Single Paint Layer, Rusts Within 6 Months
Bearings ✔ Premium Tapered Roller Bearings, 5000+ hr L10 Life ✘ Standard Ball Bearings, 1500 hr L10 Life
Heat Treatment ✔ Gas Carburizing, 1.0-1.5mm Case Depth ✘ Induction Hardening, 0.3mm Case Depth

🔄 Gerelateerde producten en accessoires

🏆 Certificeringen en kwaliteitsnormen

Our production of the EP-X30 follows ISO 9001:2015 requirements with additional internal standards that exceed baseline certification. Key processes include: 100% CMM dimensional verification, Vickers hardness mapping on every gear, hydrostatic housing leak test at 1.5× rated pressure, and a 15-minute no-load run-in test. Test reports accompany every shipment.

🏭 Waarom kiezen voor Ever-power Australia Mower Gearbox Co.,Ltd.?

What sets Ever-power Australia Mower Gearbox Co.,Ltd. apart is our ability to scale seamlessly from engineering support for a single unique application to mass production of 57000+ units per year without any compromise in quality. Our 8 gear production lines, climate-controlled metrology lab, and experienced technical sales team work together to make your sourcing process as efficient as your fieldwork needs to be.

PTO-aandrijfas

📞 Get Your EP-X30 Quote Today

Stop losing field time to gearbox failures. The EP-X30 is built to run all season without skipping a beat. Talk to our specialists about the right configuration for your operation.

Vraag een offerte aanBekijk alle producten

Related products