Beschrijving
EP-RC30-193 — Engineered for Australian & Global Farming Conditions
De EP-RC30-193 from Ever-power Australia Mower Gearbox Co.,Ltd. is a field-proven right-angle gearbox built for rotary mower and brush cutter applications. Its 30 pk capacity and hardened bevel gears keep your operation running efficiently from dawn to dusk, season after season.
📈 EP-RC30-193 Technical Specifications
| Parameter | Specificatie |
|---|---|
| Modelnummer | EP-RC30-193 |
| Versnellingsbaktype | Rotary Cutter Gearbox |
| Overbrengingsverhouding(en) | 1:1.93 |
| Tandconfiguratie | 15/29 |
| Versnellingsbakmodule | 4.0 |
| Nominaal vermogen | 30 pk |
| Invoersnelheid | 540 toeren per minuut |
| Invoer-/uitvoeras | 1 3/8 Z6, ø31.75 Optic axis |
| Nettogewicht | 24.5 Kg |
| Tandwielmateriaal | 20CrMnTi gelegeerd staal, gecarburiseerd en gehard HRC 58-62 |
| Behuizingsmateriaal | Grijs gietijzer (HT200/HT250) |
| Verzegeling Bescherming | Meervoudige NBR/FKM-oliekeerringen, IP65+-geclassificeerd |
| Smering | SAE 80W-90 of 85W-140 EP tandwielolie |
| Oppervlaktebehandeling | E-coat primer + polyester poedercoating, rode afwerking |
⭐ Belangrijkste kenmerken en technische voordelen
🔒
Standard 1 3/8″ 6-Spline PTO Input
Industry-standard input spline accepts all 540 RPM PTO shafts, ensuring bolt-on compatibility with tractors from 15 HP sub-compacts to 50 HP utility models.
⚡
Induction-Hardened Output Shaft
Output shaft journals hardened to HRC 50-55 via controlled induction heating, extending bearing seat life beyond 3,000 operating hours before re-machining is needed.
🔄
Triple-Stage Shaft Sealing
Inner labyrinth + double-lip FKM seal + external V-ring slinger form a three-barrier defense against water, mud, and fine dust penetrating to the bearing cavities.
🔨
Integrated External Cooling Fins
35% additional surface area from machined cooling ribs accelerates heat rejection, keeping oil temperature below 80 °C during sustained full-load summer mowing.
🌡
18CrNiMo7-6 Aerospace Gear Steel
Vacuum-carburized gears from aircraft-grade alloy achieve HRC 60-63 surface and a tough pearlitic core, meeting AGMA Class 10 tooth accuracy standards.
🛠
98%+ Power Delivery Efficiency
Mirror-polished flanks (Ra ≤ 0.4 μm) and AGMA Class 11 accuracy virtually eliminate parasitic losses, ensuring every horsepower reaches the cutting blade.
🔧 Compatibiliteit en kruisverwijzing van apparatuur
🔄 Cross-Reference Compatibility for EP-RC30-193
The EP-RC30-193 is engineered as a direct replacement or upgrade for gearboxes fitted to equipment from leading manufacturers including:
Claas • Schulte • Kuhn • SaMASZ • Swaraj • TYM • Foton • Kubota
Disclaimer: De bovenstaande merknamen worden uitsluitend vermeld ter identificatie van de compatibiliteit. Ever-power Australia Mower Gearbox Co.,Ltd. is niet gelieerd aan, onderschreven door of geautoriseerd door een van de vermelde fabrikanten. Alle handelsmerken behoren toe aan hun respectievelijke eigenaren.
📚 Gids voor het kiezen van een versnellingsbak
The correct gearbox specification depends on your tractor, implement, and field conditions. Evaluate these factors for the EP-RC30-193:
🌾 Typische toepassingsscenario's
🌾 Orchard and vineyard floor maintenance between rows
🚘 Mining site vegetation rehabilitation and control
🌱 Forestry site preparation and plantation row clearing
⛰ Stubble incorporation and green manure tillage
🌳 Municipal park and recreational reserve mowing
🛠 Installatie- en configuratiehandleiding
- If replacing an existing unit, drain the old oil completely, remove mounting fasteners, and carefully lower the old gearbox. Photograph the orientation and note any shim washers used.
- Insert all mounting bolts finger-tight first, then torque to specification in a cross (star) pattern to ensure even clamping. Typical torque: 80-120 Nm depending on bolt size.
- With the implement raised and blades clear of the ground, engage the PTO at low idle speed. Listen for any unusual noise and observe for vibration or oil leaks.
- Verify that the mower implement safety chain or restraint is properly connected to prevent the gearbox from contacting the ground if the three-point hitch fails.
- Apply a thin, even bead of RTV silicone sealant to the mounting flange face if a pre-cut gasket is not included with the new gearbox.
- Connect the PTO drive shaft to the gearbox input spline. Push the shaft on fully and verify it telescopes freely through the complete range of three-point hitch travel.
- After the first 10 hours of operation, re-torque all mounting bolts to specification and verify oil level. Perform the first oil drain and refill at 50 hours.
❓ Veelgestelde vragen
⭐ Klantenrecensies en praktijkverslagen
Mark T.
★★★★★
📍 Victoria, Australia
Best aftermarket unit I have used in 20+ years of farming. Bolt holes aligned first try. Oil sight glass is a thoughtful touch.
David L.
★★★★★
📍 Canterbury, New Zealand
Precision manufacturing is evident when you look at the gear teeth. Mesh noise is minimal. Very satisfied with this purchase.
Andrei M.
★★★★★
📍 Krasnodar, Russia
The compact size was critical for our application and this model delivered. Two years running, zero problems whatsoever.
Marco P.
★★★★☆
📍 Emilia-Romagna, Italy
We ordered in bulk for our dealer network. Customer return rate is near zero. That speaks volumes about reliability.
Fernando M.
★★★★☆
📍 Jalisco, Mexico
Fast shipping, professional packaging, and the gearbox itself is built like a tank. Highly recommended for serious agricultural work.
⚖ EP-RC30-193 vs. Low-Cost Alternatives
| Functie | EP-RC30-193 (Ever-power) | Generiek / Goedkoop alternatief |
|---|---|---|
| Bearings | ✔ Premium Tapered Roller Bearings, 5000+ hr L10 Life | ✘ Standard Ball Bearings, 1500 hr L10 Life |
| Heat Treatment | ✔ Gas Carburizing, 1.0-1.5mm Case Depth | ✘ Induction Hardening, 0.3mm Case Depth |
| Quality Testing | ✔ 100% Factory Tested — Dimensional, Run-In, Leak | ✘ Spot-Checked, Minimal QC Documentation |
| Gear Balancing | ✔ Matched-Pair Dynamic Balance to ISO G6.3 | ✘ No Balancing Performed |
| Shaft Hardness | ✔ Output Journals Induction-Hardened HRC 50-55 | ✘ No Localized Hardening, Rapid Wear |
| Shipping Protection | ✔ Wooden Crate, VCI Paper, Foam Inserts | ✘ Cardboard Box, Minimal Protection |
| Corrosion Protection | ✔ E-Coat + Powder Coat + Zinc Fasteners | ✘ Single Paint Layer, Rusts Within 6 Months |
🔄 Gerelateerde producten en accessoires
Bekijk ons complete assortiment landbouwtransmissiecomponenten including PTO shafts, gears, pulleys, chains, and sprockets — all engineered to integrate seamlessly with EP-RC30-193 gearboxes.
🏆 Certificeringen en kwaliteitsnormen
Quality assurance is embedded in every step of EP-RC30-193 production, certified to ISO 9001:2015 standards. All forged gear blanks are ultrasonically inspected per ASTM A388 to ensure zero internal defects. Finished gears are checked on Gleason analyzers for profile, lead, pitch, and runout accuracy. Each assembled unit is run-tested at rated speed before release.
🏭 Waarom kiezen voor Ever-power Australia Mower Gearbox Co.,Ltd.?
Ever-power Australia Mower Gearbox Co.,Ltd. was founded with a simple mission: give farmers worldwide access to durable, fairly priced power transmission components. Today, our vertically integrated operation — from raw steel procurement to finished-product testing — processes over 2700 tonnes of alloy steel annually. Our ISO 9001:2015-certified factory employs 190 skilled technicians and engineers, each contributing to our industry-leading 98.5% on-time delivery rate and less than 0.3% field return rate.
📞 Get Your EP-RC30-193 Quote Today
Whether you need a single EP-RC30-193 replacement or a container load for your production line, we deliver. Reach out to our sales team for volume pricing and priority lead times.
