EP-RC30-193 Lawn Mower Gearbox

EP-RC30-193 Lawn Mower Gearbox

Delivering a fixed 1:1.93 gear ratio at 30 HP, the EP-RC30-193 is built specifically for operators who need maximum output torque from compact tractors. Smallholders and orchard managers value its optic-axis output and lightweight 24.5 kg body for tight-space installation on narrow mower frames.

SKU: a104b0252d50 Kategori: Teg: , , , ,

Penerangan


EP-RC30-193 — Engineered for Australian & Global Farming Conditions

The EP-RC30-193 from Ever-power Australia Mower Gearbox Co.,Ltd. is a field-proven right-angle gearbox built for rotary mower and brush cutter applications. Its 30 HP capacity and hardened bevel gears keep your operation running efficiently from dawn to dusk, season after season.

EP-RC30-193 Rotary Cutter Gearbox

📈 EP-RC30-193 Technical Specifications

Parameter Spesifikasi
Nombor Model EP-RC30-193
Jenis Kotak Gear Kotak Gear Pemotong Putar
Nisbah Gear 1:1.93
Konfigurasi Gigi 15/29
Modul Gear 4.0
Kuasa Dinilai 30 HP
Kelajuan Input 540 rpm
Aci Input/Output 1 3/8 Z6, ø31.75 Optic axis
Berat Bersih 24.5 Kg
Bahan Gear Keluli Aloi 20CrMnTi, Dikarburisasi & Diperkeras HRC 58-62
Bahan Perumahan Grey Cast Iron (HT200/HT250)
Perlindungan Meterai Meterai Minyak NBR/FKM Berbilang Bibir, Dinilai IP65+
Pelinciran Minyak Gear SAE 80W-90 atau 85W-140 EP
Rawatan Permukaan Primer E-Coat + Salutan Serbuk Poliester, Kemasan Merah

⭐ Ciri-ciri Utama & Kelebihan Kejuruteraan

🔒

Standard 1 3/8″ 6-Spline PTO Input

Industry-standard input spline accepts all 540 RPM PTO shafts, ensuring bolt-on compatibility with tractors from 15 HP sub-compacts to 50 HP utility models.

⚡

Induction-Hardened Output Shaft

Output shaft journals hardened to HRC 50-55 via controlled induction heating, extending bearing seat life beyond 3,000 operating hours before re-machining is needed.

🔄

Triple-Stage Shaft Sealing

Inner labyrinth + double-lip FKM seal + external V-ring slinger form a three-barrier defense against water, mud, and fine dust penetrating to the bearing cavities.

🔨

Integrated External Cooling Fins

35% additional surface area from machined cooling ribs accelerates heat rejection, keeping oil temperature below 80 °C during sustained full-load summer mowing.

🌡

18CrNiMo7-6 Aerospace Gear Steel

Vacuum-carburized gears from aircraft-grade alloy achieve HRC 60-63 surface and a tough pearlitic core, meeting AGMA Class 10 tooth accuracy standards.

🛠

98%+ Power Delivery Efficiency

Mirror-polished flanks (Ra ≤ 0.4 μm) and AGMA Class 11 accuracy virtually eliminate parasitic losses, ensuring every horsepower reaches the cutting blade.

Kotak gear pemotong rumput dalam kegunaan pertanian

🔧 Keserasian & Rujukan Silang Peralatan

🔄 Cross-Reference Compatibility for EP-RC30-193

The EP-RC30-193 is engineered as a direct replacement or upgrade for gearboxes fitted to equipment from leading manufacturers including:

Claas • Schulte • Kuhn • SaMASZ • Swaraj • TYM • Foton • Kubota

Penafian: Nama jenama di atas dirujuk semata-mata untuk pengenalpastian keserasian. Ever-power Australia Mower Gearbox Co.,Ltd. tidak bergabung dengan, disokong oleh atau dibenarkan oleh mana-mana pengeluar tersenarai. Semua tanda dagangan adalah milik pemilik masing-masing.

📚 Panduan Pemilihan Kotak Gear

The correct gearbox specification depends on your tractor, implement, and field conditions. Evaluate these factors for the EP-RC30-193:

📌 Katalog Standard vs Spesifikasi Tersuai
The EP-RC30-193 is available as a standard catalog item shipping in 3-5 days. If your application requires a non-standard ratio, shaft type, or mounting configuration, our engineering team offers custom designs with 4-6 week lead times. Minimum order quantities may apply.
📌 Keserasian Jenis Aci Output
The EP-RC30-193 features 1 3/8 Z6, ø31.75 Optic axis output. Verify your blade hub or implement rotor accepts this shaft type before ordering. We offer multiple output configurations — spline, taper, keyway, and flange — to match virtually any existing installation.
📌 Pertimbangan Berat dan Pemasangan
At 24.5 Kg, the EP-RC30-193 is designed for compact and sub-compact tractor implements. Confirm your implement frame and three-point hitch can support this weight plus the weight of the blade assembly. Mounting bolt pattern and orientation should match your existing layout.
📌 Matching Gear Ratio to Blade Tip Speed
For the EP-RC30-193 with ratio(s) 1:1.93, calculate your required blade tip speed: typically 4,500-5,500 m/min for standard rotary cutters, 3,000-4,000 m/min for heavy brush cutting, and 5,500-6,500 m/min for fine finish mowing. Output RPM = PTO RPM ÷ ratio. Multiply by blade diameter to get tip speed.
📌 Sizing Power Rating to Tractor PTO HP
The EP-RC30-193 is rated at 30 HP. Always select a gearbox rated at or above your tractor’s maximum PTO horsepower. For shock-load applications (mulching, brush clearing), add a 25-30% safety margin: a 60 HP tractor should use a 75+ HP rated gearbox.

🌾 Senario Aplikasi Lazim

🌾 Orchard and vineyard floor maintenance between rows

🚘 Mining site vegetation rehabilitation and control

🌱 Forestry site preparation and plantation row clearing

⛰ Stubble incorporation and green manure tillage

🌳 Municipal park and recreational reserve mowing

Kemudahan pengeluaran Ever-power Australia Mower Gearbox Co.,Ltd.

🛠 Panduan Pemasangan & Persediaan

  1. If replacing an existing unit, drain the old oil completely, remove mounting fasteners, and carefully lower the old gearbox. Photograph the orientation and note any shim washers used.
  2. Insert all mounting bolts finger-tight first, then torque to specification in a cross (star) pattern to ensure even clamping. Typical torque: 80-120 Nm depending on bolt size.
  3. With the implement raised and blades clear of the ground, engage the PTO at low idle speed. Listen for any unusual noise and observe for vibration or oil leaks.
  4. Verify that the mower implement safety chain or restraint is properly connected to prevent the gearbox from contacting the ground if the three-point hitch fails.
  5. Sapukan manik pengedap silikon RTV yang nipis dan sekata pada permukaan bebibir pelekap jika gasket pra-potong tidak disertakan dengan kotak gear baharu.
  6. Sambungkan aci pemacu PTO ke spline input kotak gear. Tolak aci sepenuhnya dan sahkan ia boleh bergerak bebas melalui julat lengkap pergerakan hitch tiga titik.
  7. Selepas 10 jam pertama operasi, tork semula semua bolt pelekap mengikut spesifikasi dan sahkan paras minyak. Lakukan saliran minyak pertama dan isi semula pada 50 jam.

❓ Soalan Lazim

❓ What is the recommended oil change schedule?

Drain and replace oil after the first 50 hours of break-in. After that, change oil every 200-300 hours or at least once per season. Always drain warm oil for complete evacuation and inspect the magnetic drain plug for metallic debris.

❓ Do you manufacture custom ratios and shaft types?

Absolutely. We offer custom gear ratios, shaft profiles, and mounting configurations. Minimum order quantities apply for fully custom designs. Lead time is typically 4-6 weeks from order confirmation.

❓ What PTO shaft should I pair with this gearbox?

Use a standard agricultural PTO shaft rated for your tractor HP output with the matching spline profile. We strongly recommend shafts with shear bolt or friction clutch protection to prevent gearbox damage from sudden overloads.

❓ How does your pricing compare to genuine OEM parts?

Our gearboxes use equivalent or superior materials at typically 30-50% less than OEM pricing. Independent testing confirms comparable or better performance and service life. The savings are significant for fleet operators.

❓ What gear oil specification does this gearbox require?

Use SAE 80W-90 or SAE 85W-140 GL-5 extreme-pressure gear oil under normal conditions. For sub-zero climates below -20 °C, a synthetic 75W-90 ensures proper cold-start flow. Always check the sight glass or dipstick before each shift.

⭐ Ulasan Pelanggan & Laporan Lapangan

★★★★★

📍 Victoria, Australia

Best aftermarket unit I have used in 20+ years of farming. Bolt holes aligned first try. Oil sight glass is a thoughtful touch.

★★★★★

📍 Canterbury, New Zealand

Precision manufacturing is evident when you look at the gear teeth. Mesh noise is minimal. Very satisfied with this purchase.

★★★★★

📍 Krasnodar, Rusia

The compact size was critical for our application and this model delivered. Two years running, zero problems whatsoever.

★★★★☆

📍 Emilia-Romagna, Itali

We ordered in bulk for our dealer network. Customer return rate is near zero. That speaks volumes about reliability.

★★★★☆

📍 Jalisco, Mexico

Fast shipping, professional packaging, and the gearbox itself is built like a tank. Highly recommended for serious agricultural work.

Julat kotak gear pertanian

⚖ EP-RC30-193 vs. Low-Cost Alternatives

Ciri EP-RC30-193 (Ever-power) Alternatif Generik / Kos Rendah
Bearing ✔ Galas Penggelek Tirus Premium, Jangka Hayat L10 5000+ jam ✘ Galas Bebola Standard, Jangka Hayat L10 1500 jam
Rawatan Haba ✔ Pengkarbonan Gas, Kedalaman Sarung 1.0-1.5mm ✘ Pengerasan Induksi, Kedalaman Sarung 0.3mm
Pengujian Kualiti ✔ 100% Diuji Kilang — Dimensi, Larian Masuk, Kebocoran ✘ Dokumentasi QC Minimum, Diperiksa Tepat Waktu
Pengimbangan Gear ✔ Imbangan Dinamik Pasangan Padanan kepada ISO G6.3 ✘ Tiada Pengimbangan Dilakukan
Kekerasan Aci ✔ Jurnal Output HRC 50-55 yang Diperkeraskan dengan Induksi ✘ Tiada Pengerasan Setempat, Haus Cepat
Perlindungan Penghantaran ✔ Peti Kayu, Kertas VCI, Sisipan Buih ✘ Kotak Kadbod, Perlindungan Minimum
Perlindungan Kakisan ✔ E-Coat + Salutan Serbuk + Pengikat Zink ✘ Lapisan Cat Tunggal, Berkarat Dalam Tempoh 6 Bulan

🔄 Produk & Aksesori Berkaitan

🏆 Pensijilan & Piawaian Kualiti

Quality assurance is embedded in every step of EP-RC30-193 production, certified to ISO 9001:2015 standards. All forged gear blanks are ultrasonically inspected per ASTM A388 to ensure zero internal defects. Finished gears are checked on Gleason analyzers for profile, lead, pitch, and runout accuracy. Each assembled unit is run-tested at rated speed before release.

🏭 Mengapa Memilih Ever-power Australia Mower Gearbox Co.,Ltd.?

Ever-power Australia Mower Gearbox Co.,Ltd. was founded with a simple mission: give farmers worldwide access to durable, fairly priced power transmission components. Today, our vertically integrated operation — from raw steel procurement to finished-product testing — processes over 2700 tonnes of alloy steel annually. Our ISO 9001:2015-certified factory employs 190 skilled technicians and engineers, each contributing to our industry-leading 98.5% on-time delivery rate and less than 0.3% field return rate.

Aci pemacu PTO

📞 Get Your EP-RC30-193 Quote Today

Whether you need a single EP-RC30-193 replacement or a container load for your production line, we deliver. Reach out to our sales team for volume pricing and priority lead times.

Minta Sebut HargaLayari Semua Produk

Produk berkaitan