EP-RC130-146 Lawn Mower Gearbox

EP-RC130-146 Lawn Mower Gearbox

The EP-RC130-146 is an industrial-grade 130 HP gearbox with 1 3/4 inch Z20 input for large-scale rotary cutters. Land clearing contractors and government road maintenance crews depend on its dual-ratio flexibility and 56 kg cast iron housing to handle thick brush and rough terrain daily.

SKU: 75974929faee Category: Tags: , , , ,

وصف


EP-RC130-146 High-Power Rotary Cutter Gearbox — Precision Power Transmission for Modern Mowing

ال EP-RC130-146 represents the latest in علبة تروس زراعية engineering. With 130 / 100 HP capacity, 1:1.46 / 1:1.92 ratio configuration, and 56 Kg optimized construction, it delivers the power density and reliability today’s farming operations require.

EP-RC130-146 High-Power Rotary Cutter Gearbox

📈 EP-RC130-146 Technical Specifications

المعلمة مواصفة
رقم الموديل EP-RC130-146
نوع علبة التروس High-Power Rotary Cutter Gearbox
نسبة التروس 1:1.46 / 1:1.92
تكوين الأسنان 19/13, 27/14
وحدة التروس 6 / 8
القدرة المقدرة 130 / 100 HP
سرعة الإدخال 540 دورة في الدقيقة
عمود الإدخال/الإخراج 1 3/4 Z20, Taper spline
الوزن الصافي 56 Kg
مادة التروس فولاذ سبيكي 20CrMnTi، مُكربن ومُقسّى HRC 58-62
مواد البناء Ductile Cast Iron (QT450-10)
حماية الختم موانع تسرب زيت متعددة الحواف من مادة NBR/FKM، حاصلة على تصنيف IP65+
تشحيم زيت تروس SAE 80W-90 أو 85W-140 EP
معالجة السطح طبقة أساسية مطلية بالكهرباء + طبقة مسحوق بوليستر، لون أحمر

⭐ الميزات الرئيسية والمزايا الهندسية

⚡

Pre-Filled EP90 Gear Lubricant

Ships factory-filled with extreme-pressure SAE 90 gear oil and includes a clear sight glass for instant oil-level verification before each operating session.

🔄

QT450-10 Ductile Iron Shell

Nodular graphite iron housing absorbs 40% more impact energy than grey iron, protecting internal components when the mower strikes concealed rocks or fence posts.

🔨

Dual 540/1000 RPM Configurability

Input shaft and gear set available in both 540 RPM and 1000 RPM PTO configurations, covering the full range of modern tractor PTO standards from a single product family.

🌡

Rapid-Release Blade Flange

Quick-disconnect output flange with self-centering pilot reduces blade swap time to under 10 minutes, cutting maintenance downtime by 60% versus bolted hubs.

🛠

Quadruple-Barrier Environmental Sealing

Labyrinth + twin Viton FKM seals + armored debris shield achieve IP67, protecting against total submersion and high-pressure cleaning equipment.

🔬

Forced-Splash Oil Distribution

Gear-driven splash channels route lubricant to every bearing and mesh zone even on hillside slopes up to 35°, preventing dry-running at extreme operating angles.

Mower gearbox in agricultural use

🔧 توافق المعدات والمراجع المتبادلة

🔄 Cross-Reference Compatibility for EP-RC130-146

The EP-RC130-146 is engineered as a direct replacement or upgrade for gearboxes fitted to equipment from leading manufacturers including:

Land Pride • Mahindra • Pöttinger • TAFE • McCormick • Mitsubishi • Zoomlion • Case IH

إخلاء مسؤولية: تُستخدم أسماء العلامات التجارية المذكورة أعلاه لأغراض تحديد التوافق فقط. شركة إيفر-باور أستراليا لتصنيع علب تروس جزازات العشب المحدودة ليست تابعة لأي من الشركات المصنعة المذكورة، ولا معتمدة منها، ولا مرخصة لها. جميع العلامات التجارية مملوكة لأصحابها المعنيين.

📚 دليل اختيار علبة التروس

Selecting a gearbox that matches your exact requirements avoids premature wear and costly downtime. Consider these points for the EP-RC130-146:

📌 اعتبارات الوزن والتركيب
At 56 Kg, the EP-RC130-146 is designed for large-frame tractor implements and heavy-duty mowers. Confirm your implement frame and three-point hitch can support this weight plus the weight of the blade assembly. Mounting bolt pattern and orientation should match your existing layout.
📌 مطابقة نسبة التروس مع سرعة طرف الشفرة
For the EP-RC130-146 with ratio(s) 1:1.46 / 1:1.92, calculate your required blade tip speed: typically 4,500-5,500 m/min for standard rotary cutters, 3,000-4,000 m/min for heavy brush cutting, and 5,500-6,500 m/min for fine finish mowing. Output RPM = PTO RPM ÷ ratio. Multiply by blade diameter to get tip speed.
📌 تحديد حجم قدرة المحرك بالحصان (PTO) للجرار
The EP-RC130-146 is rated at 130 / 100 HP. Always select a gearbox rated at or above your tractor’s maximum PTO horsepower. For shock-load applications (mulching, brush clearing), add a 25-30% safety margin: a 60 HP tractor should use a 75+ HP rated gearbox.
📌 اختيار سرعة دوران عمود إدارة الطاقة (PTO) بين 540 دورة في الدقيقة و1000 دورة في الدقيقة
The EP-RC130-146 operates at 540 rpm. Most rotary mowers use 540 RPM PTO. The 1000 RPM standard is for larger implements on high-HP tractors. Never connect a 540 RPM gearbox to a 1000 RPM PTO — the doubled speed will destroy bearings and gears within minutes.
📌 Cast Iron Housing vs Aluminium Housing
The EP-RC130-146 uses a ductile cast iron housing. Cast iron excels in vibration damping, impact resistance, and heat dissipation — ideal for rough, rocky mowing conditions. Aluminium is lighter and more corrosion-resistant, better suited to wet environments and weight-sensitive implements.

🌾 سيناريوهات التطبيق النموذجية

🌾 Airfield perimeter and runway strip grass management

🚘 Sugar cane and crop stubble field mulching

🌱 Dairy farm laneway and yard surround maintenance

⛰ Conservation tillage and minimum-disturbance cultivation

🌳 Railway corridor vegetation control programs

Ever-power Australia Mower Gearbox Co.,Ltd. manufacturing facility

🛠 دليل التثبيت والإعداد

  1. افحص قاعدة تثبيت الآلة للتأكد من استوائها باستخدام مسطرة مستقيمة. يجب تصحيح أي اعوجاج يتجاوز 0.5 مم قبل تركيب علبة التروس الجديدة.
  2. استخدم غسالات Nord-Lock أو مركب تثبيت الخيوط على جميع مسامير التثبيت لمنع الارتخاء الناتج عن الاهتزاز أثناء التشغيل.
  3. قم بتشغيل علبة التروس بدون حمل لمدة 5-10 دقائق، ثم قم بإيقاف تشغيلها وأعد فحص مستوى الزيت - غالبًا ما تمتص الأختام والمحامل الجديدة كمية صغيرة من الزيت الأولي.
  4. قم بتنظيف سطح تركيب الأداة جيدًا، وإزالة كل الصدأ ومواد الحشية القديمة ورقائق الطلاء والحطام الذي قد يمنع التلامس المحكم مع شفة علبة التروس.
  5. قم بوضع علبة التروس على مسامير التثبيت أو فتحات البراغي، مع التأكد من أن عمود الإدخال يواجه مأخذ الطاقة للجرار وأن عمود الإخراج يتماشى مع محور الشفرة أو الدوار.
  6. تأكد من أن عمود نقل الحركة (PTO) يحتوي على تداخل لا يقل عن 50% في جميع أوضاع التشغيل. يؤدي التداخل غير الكافي إلى تآكل سريع في التروس واحتمالية انفصال العمود.
  7. Record the installation date, tractor hour meter reading, and gearbox serial number in your maintenance log for warranty and service interval tracking.

❓ الأسئلة الشائعة

❓ What warranty do you provide?

Every gearbox ships with a 12-month warranty covering material and workmanship defects under normal operating conditions. Warranty claims are handled through our dealer network with replacement units dispatched within 48 hours of approval.

❓ How do I determine the correct model for my mower?

You need four pieces of information: (1) tractor PTO HP, (2) PTO speed (540 or 1000 RPM), (3) current gearbox mounting dimensions, and (4) output shaft type. Send us these details and we will cross-reference the best match.

❓ Is synthetic gear oil recommended?

Synthetic PAO-based 75W-90 or 80W-140 GL-5 oil is excellent, especially in extreme temperatures. Synthetics offer better cold-flow, higher film strength, and longer drain intervals. Fully compatible with all our seal materials.

❓ What shipping methods are available?

Sea freight (20-35 days), air freight (5-10 days), and express courier (3-5 days) worldwide. Sea freight is most economical for bulk orders. All shipments include protective packaging, documentation, and full tracking.

❓ Can this unit directly replace my OEM gearbox?

Yes. Our mounting patterns, shaft diameters, and spline profiles match industry-standard OEM dimensions. We supply detailed technical drawings for cross-referencing. If your existing unit differs slightly, our engineering team can advise on adapters.

⭐ آراء العملاء وتقارير ميدانية

★★★★★

📍 Western Australia, Australia

The compact size was critical for our application and this model delivered. Two years running, zero problems whatsoever.

★★★★★

📍 بولتافا، أوكرانيا

We ordered in bulk for our dealer network. Customer return rate is near zero. That speaks volumes about reliability.

★★★★★

📍 Córdoba, Argentina

Fast shipping, professional packaging, and the gearbox itself is built like a tank. Highly recommended for serious agricultural work.

★★★★☆

📍 Bordeaux, France

Installed on a mulching mower that sees 8+ hours of use per day during season. Absolutely dependable. That is all I ask of a gearbox.

★★★★☆

📍 Adana, Turkey

We maintain 40+ mowers for council contracts. Switching to this brand has reduced our gearbox failure rate by over 60 percent.

Agricultural gearbox range

⚖ EP-RC130-146 vs. Low-Cost Alternatives

ميزة EP-RC130-146 (Ever-power) بديل عام / منخفض التكلفة
Oil Seals ✔ Double-Lip NBR/FKM, IP65 Rated ✘ Single-Lip NBR, No Dust Lip
Dimensional Tolerance ✔ ISO IT6-IT7, CNC Machined Throughout ✘ ISO IT9-IT10, Partially Hand-Finished
Documentation ✔ Full Drawings, Cross-Reference, Install Guide ✘ Basic Single-Page Spec Sheet Only
Fastener Protection ✔ Zinc-Flake Coated Grade 10.9 Bolts ✘ Plain Steel Grade 8.8, Corrodes and Seizes
Oil Level Check ✔ Clear Sight Glass + Dipstick Standard ✘ No Sight Glass, Must Remove Fill Plug
After-Sales Support ✔ Dedicated Technical Team, Video Call Support ✘ Email Only, 1-2 Week Response Time
Engineering Support ✔ Free Application Engineering & Cross-Reference ✘ No Technical Support Provided

🔄 Related Products & Accessories

🏆 Certifications & Quality Standards

The EP-RC130-146 is produced in our ISO 9001:2015 certified facility with full material traceability from steel mill to finished product. We perform incoming material inspection (spectrometry and hardness), in-process dimensional verification at every machining stage, and final assembly testing that includes noise, vibration, and oil-leak checks. Certificates of conformance are available on request.

🏭 Why Choose Ever-power Australia Mower Gearbox Co.,Ltd.?

Choosing Ever-power Australia Mower Gearbox Co.,Ltd. means partnering with a manufacturer that understands agricultural machinery from the ground up. Our R&D team develops 15 new gearbox models each year, collaborating directly with implement OEMs in Australia, Germany, the United States, Brazil, and beyond. Whether you need a standard catalog gearbox shipped next week or a fully custom design with unique ratios and mounting interfaces, we deliver — on specification, on budget, and on time.

PTO drive shaft

📞 Get Your EP-RC130-146 Quote Today

Upgrade from unreliable aftermarket gearboxes to the proven EP-RC130-146. Our team is ready to provide datasheets, cross-reference guides, and a no-obligation quotation within 24 hours.

Request a QuoteBrowse All Products

Related products