EP-RC130-146 Lawn Mower Gearbox

EP-RC130-146 Lawn Mower Gearbox

The EP-RC130-146 is an industrial-grade 130 HP gearbox with 1 3/4 inch Z20 input for large-scale rotary cutters. Land clearing contractors and government road maintenance crews depend on its dual-ratio flexibility and 56 kg cast iron housing to handle thick brush and rough terrain daily.

Artikelnummer: 75974929faee Categorie: Tags: , , , ,

Beschrijving


EP-RC130-146 High-Power Rotary Cutter Gearbox — Precision Power Transmission for Modern Mowing

De EP-RC130-146 represents the latest in agricultural gearbox engineering. With 130 / 100 HP capacity, 1:1.46 / 1:1.92 ratio configuration, and 56 Kg optimized construction, it delivers the power density and reliability today’s farming operations require.

EP-RC130-146 High-Power Rotary Cutter Gearbox

📈 EP-RC130-146 Technical Specifications

Parameter Specificatie
Modelnummer EP-RC130-146
Versnellingsbaktype High-Power Rotary Cutter Gearbox
Overbrengingsverhouding(en) 1:1.46 / 1:1.92
Tandconfiguratie 19/13, 27/14
Tandwielmodule 6 / 8
Nominaal vermogen 130 / 100 HP
Invoersnelheid 540 toeren per minuut
Invoer-/uitvoeras 1 3/4 Z20, Taper spline
Nettogewicht 56 Kg
Tandwielmateriaal 20CrMnTi gelegeerd staal, gecarburiseerd en gehard HRC 58-62
Behuizingsmateriaal Ductile Cast Iron (QT450-10)
Verzegeling Bescherming Meervoudige NBR/FKM-oliekeerringen, IP65+-geclassificeerd
Smering SAE 80W-90 of 85W-140 EP tandwielolie
Oppervlaktebehandeling E-coat primer + polyester poedercoating, rode afwerking

⭐ Belangrijkste kenmerken en technische voordelen

⚡

Pre-Filled EP90 Gear Lubricant

Ships factory-filled with extreme-pressure SAE 90 gear oil and includes a clear sight glass for instant oil-level verification before each operating session.

🔄

QT450-10 Ductile Iron Shell

Nodular graphite iron housing absorbs 40% more impact energy than grey iron, protecting internal components when the mower strikes concealed rocks or fence posts.

🔨

Dual 540/1000 RPM Configurability

Input shaft and gear set available in both 540 RPM and 1000 RPM PTO configurations, covering the full range of modern tractor PTO standards from a single product family.

🌡

Rapid-Release Blade Flange

Quick-disconnect output flange with self-centering pilot reduces blade swap time to under 10 minutes, cutting maintenance downtime by 60% versus bolted hubs.

🛠

Quadruple-Barrier Environmental Sealing

Labyrinth + twin Viton FKM seals + armored debris shield achieve IP67, protecting against total submersion and high-pressure cleaning equipment.

🔬

Forced-Splash Oil Distribution

Gear-driven splash channels route lubricant to every bearing and mesh zone even on hillside slopes up to 35°, preventing dry-running at extreme operating angles.

Mower gearbox in agricultural use

🔧 Compatibiliteit en kruisverwijzing van apparatuur

🔄 Cross-Reference Compatibility for EP-RC130-146

The EP-RC130-146 is engineered as a direct replacement or upgrade for gearboxes fitted to equipment from leading manufacturers including:

Land Pride • Mahindra • Pöttinger • TAFE • McCormick • Mitsubishi • Zoomlion • Case IH

Disclaimer: De bovenstaande merknamen worden uitsluitend vermeld ter identificatie van de compatibiliteit. Ever-power Australia Mower Gearbox Co.,Ltd. is niet gelieerd aan, onderschreven door of geautoriseerd door een van de vermelde fabrikanten. Alle handelsmerken behoren toe aan hun respectievelijke eigenaren.

📚 Gids voor het kiezen van een versnellingsbak

Selecting a gearbox that matches your exact requirements avoids premature wear and costly downtime. Consider these points for the EP-RC130-146:

📌 Weight and Mounting Considerations
At 56 Kg, the EP-RC130-146 is designed for large-frame tractor implements and heavy-duty mowers. Confirm your implement frame and three-point hitch can support this weight plus the weight of the blade assembly. Mounting bolt pattern and orientation should match your existing layout.
📌 Afstemming van de overbrengingsverhouding op de snelheid van de bladpunt
For the EP-RC130-146 with ratio(s) 1:1.46 / 1:1.92, calculate your required blade tip speed: typically 4,500-5,500 m/min for standard rotary cutters, 3,000-4,000 m/min for heavy brush cutting, and 5,500-6,500 m/min for fine finish mowing. Output RPM = PTO RPM ÷ ratio. Multiply by blade diameter to get tip speed.
📌 Vermogensclassificatie afstemmen op aftakasvermogen (PTO) van de tractor
The EP-RC130-146 is rated at 130 / 100 HP. Always select a gearbox rated at or above your tractor’s maximum PTO horsepower. For shock-load applications (mulching, brush clearing), add a 25-30% safety margin: a 60 HP tractor should use a 75+ HP rated gearbox.
📌 Keuze tussen 540 tpm en 1000 tpm aftakas
The EP-RC130-146 operates at 540 rpm. Most rotary mowers use 540 RPM PTO. The 1000 RPM standard is for larger implements on high-HP tractors. Never connect a 540 RPM gearbox to a 1000 RPM PTO — the doubled speed will destroy bearings and gears within minutes.
📌 Gietijzeren behuizing versus aluminium behuizing
The EP-RC130-146 uses a ductile cast iron housing. Cast iron excels in vibration damping, impact resistance, and heat dissipation — ideal for rough, rocky mowing conditions. Aluminium is lighter and more corrosion-resistant, better suited to wet environments and weight-sensitive implements.

🌾 Typische toepassingsscenario's

🌾 Airfield perimeter and runway strip grass management

🚘 Sugar cane and crop stubble field mulching

🌱 Dairy farm laneway and yard surround maintenance

⛰ Conservation tillage and minimum-disturbance cultivation

🌳 Railway corridor vegetation control programs

Ever-power Australia Mower Gearbox Co.,Ltd. manufacturing facility

🛠 Installatie- en configuratiehandleiding

  1. Controleer met een liniaal of de montageplaat van het werktuig vlak is. Eventuele krommingen van meer dan 0,5 mm moeten worden gecorrigeerd voordat de nieuwe versnellingsbak wordt gemonteerd.
  2. Gebruik Nord-Lock-ringen of schroefdraadborgmiddel op alle bevestigingsbouten om losraken door trillingen tijdens gebruik te voorkomen.
  3. Run the gearbox at no load for 5-10 minutes, then shut down and re-check oil level — new seals and bearings often absorb a small amount of initial oil.
  4. Clean the implement mounting surface thoroughly, removing all rust, old gasket material, paint flakes, and debris that could prevent flush contact with the gearbox flange.
  5. Position the gearbox onto the mounting studs or bolt holes, verifying the input shaft faces the tractor PTO and the output shaft aligns with the blade hub or rotor.
  6. Ensure the PTO shaft has at least 50% spline overlap in all operating positions. Inadequate overlap causes rapid spline wear and potential shaft separation.
  7. Record the installation date, tractor hour meter reading, and gearbox serial number in your maintenance log for warranty and service interval tracking.

❓ Veelgestelde vragen

❓ What warranty do you provide?

Every gearbox ships with a 12-month warranty covering material and workmanship defects under normal operating conditions. Warranty claims are handled through our dealer network with replacement units dispatched within 48 hours of approval.

❓ How do I determine the correct model for my mower?

You need four pieces of information: (1) tractor PTO HP, (2) PTO speed (540 or 1000 RPM), (3) current gearbox mounting dimensions, and (4) output shaft type. Send us these details and we will cross-reference the best match.

❓ Is synthetic gear oil recommended?

Synthetic PAO-based 75W-90 or 80W-140 GL-5 oil is excellent, especially in extreme temperatures. Synthetics offer better cold-flow, higher film strength, and longer drain intervals. Fully compatible with all our seal materials.

❓ What shipping methods are available?

Sea freight (20-35 days), air freight (5-10 days), and express courier (3-5 days) worldwide. Sea freight is most economical for bulk orders. All shipments include protective packaging, documentation, and full tracking.

❓ Can this unit directly replace my OEM gearbox?

Yes. Our mounting patterns, shaft diameters, and spline profiles match industry-standard OEM dimensions. We supply detailed technical drawings for cross-referencing. If your existing unit differs slightly, our engineering team can advise on adapters.

⭐ Klantenrecensies en praktijkverslagen

★★★★★

📍 Western Australia, Australia

The compact size was critical for our application and this model delivered. Two years running, zero problems whatsoever.

★★★★★

📍 Poltava, Oekraïne

We ordered in bulk for our dealer network. Customer return rate is near zero. That speaks volumes about reliability.

★★★★★

📍 Córdoba, Argentinië

Fast shipping, professional packaging, and the gearbox itself is built like a tank. Highly recommended for serious agricultural work.

★★★★☆

📍 Bordeaux, France

Installed on a mulching mower that sees 8+ hours of use per day during season. Absolutely dependable. That is all I ask of a gearbox.

★★★★☆

📍 Adana, Turkey

We maintain 40+ mowers for council contracts. Switching to this brand has reduced our gearbox failure rate by over 60 percent.

Agricultural gearbox range

⚖ EP-RC130-146 vs. Low-Cost Alternatives

Functie EP-RC130-146 (Ever-power) Generiek / Goedkoop alternatief
Oil Seals ✔ Double-Lip NBR/FKM, IP65 Rated ✘ Single-Lip NBR, No Dust Lip
Dimensional Tolerance ✔ ISO IT6-IT7, CNC Machined Throughout ✘ ISO IT9-IT10, Partially Hand-Finished
Documentation ✔ Full Drawings, Cross-Reference, Install Guide ✘ Basic Single-Page Spec Sheet Only
Fastener Protection ✔ Zinc-Flake Coated Grade 10.9 Bolts ✘ Plain Steel Grade 8.8, Corrodes and Seizes
Oil Level Check ✔ Clear Sight Glass + Dipstick Standard ✘ No Sight Glass, Must Remove Fill Plug
After-Sales Support ✔ Dedicated Technical Team, Video Call Support ✘ Email Only, 1-2 Week Response Time
Engineering Support ✔ Free Application Engineering & Cross-Reference ✘ No Technical Support Provided

🔄 Related Products & Accessories

🏆 Certifications & Quality Standards

The EP-RC130-146 is produced in our ISO 9001:2015 certified facility with full material traceability from steel mill to finished product. We perform incoming material inspection (spectrometry and hardness), in-process dimensional verification at every machining stage, and final assembly testing that includes noise, vibration, and oil-leak checks. Certificates of conformance are available on request.

🏭 Why Choose Ever-power Australia Mower Gearbox Co.,Ltd.?

Choosing Ever-power Australia Mower Gearbox Co.,Ltd. means partnering with a manufacturer that understands agricultural machinery from the ground up. Our R&D team develops 15 new gearbox models each year, collaborating directly with implement OEMs in Australia, Germany, the United States, Brazil, and beyond. Whether you need a standard catalog gearbox shipped next week or a fully custom design with unique ratios and mounting interfaces, we deliver — on specification, on budget, and on time.

PTO drive shaft

📞 Get Your EP-RC130-146 Quote Today

Upgrade from unreliable aftermarket gearboxes to the proven EP-RC130-146. Our team is ready to provide datasheets, cross-reference guides, and a no-obligation quotation within 24 hours.

Request a QuoteBrowse All Products

Gerelateerde producten