Caja de engranajes para cultivador rotativo EP-RTD50

Caja de engranajes para cultivador rotativo EP-RTD50

As a center-drive gearbox for rotary tillers, the EP-RTD50 distributes 50 HP evenly to left and right tiller rotor sections. Broadacre tillage operators and commercial cultivation services select this model for its balanced power delivery, precision flange alignment, and extended 500-hour oil change intervals.

SKU: 427d10ca2d08 Categoría: Etiquetas: , , , ,

Descripción


EP-RTD50 — The Operator’s Choice in Rotary Tiller Center Gearbox Technology

Trusted by professional farmers and contractors worldwide, the EP-RTD50 caja de cambios de la segadora combines 50 HP capacity with robust 25 Kg (approx.) cast construction. Available in N/A ratio configurations, it adapts to your mowing conditions with ease.

EP-RTD50 Rotary Tiller Center Gearbox

📈 EP-RTD50 Technical Specifications

Parámetro Especificación
Número de modelo EP-RTD50
Tipo de caja de cambios Rotary Tiller Center Gearbox
Relación(es) de transmisión N/A
Configuración de los dientes N/A
Módulo de engranajes N/A
Potencia nominal 50 HP
Velocidad de entrada 540 rpm
Eje de entrada/salida Flange mount
Peso neto 25 Kg (approx.)
Material de engranajes Acero aleado 20CrMnTi, carburizado y endurecido HRC 58-62
Material de vivienda Grey Cast Iron (HT200/HT250)
Protección de sellado Retenes de aceite multilabios NBR/FKM, con clasificación IP65+
Lubricación Aceite para engranajes SAE 80W-90 o 85W-140 EP
Tratamiento de superficies Imprimación electroforética + recubrimiento en polvo de poliéster, acabado rojo.

⭐ Características clave y ventajas de ingeniería

⚖

Hot-Dip Galvanized Mounting Hardware

Grade 10.9 mounting bolts hot-dip galvanized to AS/NZS 4680, resisting corrosion in coastal and high-humidity farming regions like northern Queensland and Waikato.

🚀

Field-Rebuildable Modular Design

All internal components — gears, bearings, seals, shafts — are individually replaceable in the field with standard hand tools, eliminating the need to send units away for factory rebuild.

💪

Dual-Lip NBR Oil Seals

Twin-lip nitrile seals with integrated dust excluder on every shaft exit, rated to IP65, preventing moisture and crop debris from entering the gear chamber.

⚙

Optimized Lightweight Geometry

Finite-element-optimized casing walls remove unnecessary material while maintaining full load capacity, reducing installed weight by 15% versus previous-generation housings.

⚗

20CrMnTi Forged Gear Blanks

All gear blanks are closed-die forged (not cast) to align grain flow with tooth roots, increasing bending fatigue strength by 30% over alternative casting methods.

🔒

97%+ Mechanical Efficiency Rating

Super-finished gear flanks (Ra ≤ 0.6 μm) and optimized tooth contact deliver over 97% efficiency, reducing fuel consumption and allowing cooler continuous operation.

Caja de engranajes de segadora para uso agrícola

🔧 Compatibilidad de equipos y referencias cruzadas

🔄 Cross-Reference Compatibility for EP-RTD50

The EP-RTD50 is engineered as a direct replacement or upgrade for gearboxes fitted to equipment from leading manufacturers including:

Pöttinger • TAFE • McCormick • Mitsubishi • Zoomlion • Case IH • Land Pride • Mahindra

Descargo de responsabilidad: Las marcas mencionadas anteriormente se utilizan únicamente para identificar la compatibilidad. Ever-power Australia Mower Gearbox Co., Ltd. no está afiliada, respaldada ni autorizada por ninguno de los fabricantes mencionados. Todas las marcas registradas pertenecen a sus respectivos propietarios.

📚 Guía de selección de cajas de cambios

Getting gearbox selection right the first time saves money and headaches. Here is a systematic approach to specifying the EP-RTD50:

📌 Cast Iron Housing vs Aluminium Housing
The EP-RTD50 uses a grey cast iron housing. Cast iron excels in vibration damping, impact resistance, and heat dissipation — ideal for rough, rocky mowing conditions. Aluminium is lighter and more corrosion-resistant, better suited to wet environments and weight-sensitive implements.
📌 Standard Catalog vs Custom Specification
The EP-RTD50 is available as a standard catalog item shipping in 3-5 days. If your application requires a non-standard ratio, shaft type, or mounting configuration, our engineering team offers custom designs with 4-6 week lead times. Minimum order quantities may apply.
📌 Compatibilidad con el tipo de eje de salida
The EP-RTD50 features Flange mount output. Verify your blade hub or implement rotor accepts this shaft type before ordering. We offer multiple output configurations — spline, taper, keyway, and flange — to match virtually any existing installation.
📌 Consideraciones sobre el peso y el montaje
At 25 Kg (approx.), the EP-RTD50 is designed for rotary tiller frames and cultivation equipment. Confirm your implement frame and three-point hitch can support this weight plus the weight of the blade assembly. Mounting bolt pattern and orientation should match your existing layout.
📌 Adaptación de la relación de engranajes a la velocidad de la punta de la cuchilla
For the EP-RTD50 with ratio(s) N/A, calculate your required blade tip speed: typically 4,500-5,500 m/min for standard rotary cutters, 3,000-4,000 m/min for heavy brush cutting, and 5,500-6,500 m/min for fine finish mowing. Output RPM = PTO RPM ÷ ratio. Multiply by blade diameter to get tip speed.

🌾 Escenarios de aplicación típicos

🌾 Pipeline and powerline easement clearing

🚘 Riparian zone and waterway bank vegetation control

🌱 Rotary tiller seedbed preparation for row crops

⛰ Land clearing of light to medium regrowth scrub

🌳 Hay field pre-cut conditioning and topping

Planta de fabricación de Ever-power Australia Mower Gearbox Co., Ltd.

🛠 Guía de instalación y configuración

  1. Anote la fecha de instalación, la lectura del contador de horas del tractor y el número de serie de la caja de cambios en su registro de mantenimiento para el seguimiento de la garantía y los intervalos de servicio.
  2. Si va a reemplazar una unidad existente, drene completamente el aceite viejo, retire los sujetadores de montaje y baje con cuidado la caja de engranajes vieja. Fotografie la posición y anote las arandelas de ajuste utilizadas.
  3. Primero, apriete todos los tornillos de montaje a mano y, a continuación, aplique el par de apriete especificado siguiendo un patrón en cruz (o estrella) para asegurar una sujeción uniforme. Par de apriete típico: 80-120 Nm, según el tamaño del tornillo.
  4. With the implement raised and blades clear of the ground, engage the PTO at low idle speed. Listen for any unusual noise and observe for vibration or oil leaks.
  5. Verify that the mower implement safety chain or restraint is properly connected to prevent the gearbox from contacting the ground if the three-point hitch fails.
  6. Apply a thin, even bead of RTV silicone sealant to the mounting flange face if a pre-cut gasket is not included with the new gearbox.
  7. Connect the PTO drive shaft to the gearbox input spline. Push the shaft on fully and verify it telescopes freely through the complete range of three-point hitch travel.

❓ Preguntas frecuentes

❓ What warranty do you provide?

Every gearbox ships with a 12-month warranty covering material and workmanship defects under normal operating conditions. Warranty claims are handled through our dealer network with replacement units dispatched within 48 hours of approval.

❓ How do I determine the correct model for my mower?

You need four pieces of information: (1) tractor PTO HP, (2) PTO speed (540 or 1000 RPM), (3) current gearbox mounting dimensions, and (4) output shaft type. Send us these details and we will cross-reference the best match.

❓ Is synthetic gear oil recommended?

Synthetic PAO-based 75W-90 or 80W-140 GL-5 oil is excellent, especially in extreme temperatures. Synthetics offer better cold-flow, higher film strength, and longer drain intervals. Fully compatible with all our seal materials.

❓ What shipping methods are available?

Sea freight (20-35 days), air freight (5-10 days), and express courier (3-5 days) worldwide. Sea freight is most economical for bulk orders. All shipments include protective packaging, documentation, and full tracking.

❓ Can this unit directly replace my OEM gearbox?

Yes. Our mounting patterns, shaft diameters, and spline profiles match industry-standard OEM dimensions. We supply detailed technical drawings for cross-referencing. If your existing unit differs slightly, our engineering team can advise on adapters.

⭐ Opiniones de clientes e informes de campo

★★★★★

📍 Western Australia, Australia

Runs noticeably cooler than the old gearbox it replaced. The improved cooling design and better oil volume are making a real difference.

★★★★★

📍 São Paulo, Brazil

We tested this against a competitor unit side by side. This one runs quieter, stays cooler, and the oil stayed cleaner over 200 hours.

★★★★★

📍 Skåne, Suecia

First purchase from this manufacturer and I am thoroughly impressed. Build quality, documentation, and support were all top-notch.

★★★★☆

📍 Alentejo, Portugal

After comparing specifications across five brands, this offered the best combination of materials, weight, and price. No regrets.

★★★★☆

📍 Canterbury, Nueva Zelanda

Fitted to my pasture topper last season. Over 400 hours and counting — zero leaks, minimal noise. Excellent value for a professional-grade unit.

Gama de cajas de cambios agrícolas

⚖ EP-RTD50 vs. Low-Cost Alternatives

Característica EP-RTD50 (Ever-power) Alternativa genérica/de bajo costo
Soporte de ingeniería ✔ Ingeniería de aplicaciones y referencias cruzadas gratuitas ✘ No se proporciona soporte técnico
Retenes de aceite ✔ Doble labio NBR/FKM, clasificación IP65 ✘ Labio único NBR, sin polvo
Tolerancia dimensional ✔ ISO IT6-IT7, mecanizado CNC en su totalidad ✘ ISO IT9-IT10, acabado parcialmente a mano
Documentación ✔ Planos completos, referencias cruzadas, guía de instalación ✘ Solo hoja de especificaciones básica de una página
Protección de sujetadores ✔ Pernos de grado 10.9 con recubrimiento de escamas de zinc ✘ Acero liso de grado 8.8, se corroe y se atasca.
Comprobación del nivel de aceite ✔ Mirilla transparente + varilla medidora de nivel estándar ✘ Sin mirilla, es necesario quitar el tapón de llenado.
Soporte posventa ✔ Equipo técnico especializado, soporte para videollamadas ✘ Solo por correo electrónico, tiempo de respuesta de 1 a 2 semanas.

🔄 Productos y accesorios relacionados

🏆 Certificaciones y estándares de calidad

Our production of the EP-RTD50 follows ISO 9001:2015 requirements with additional internal standards that exceed baseline certification. Key processes include: 100% CMM dimensional verification, Vickers hardness mapping on every gear, hydrostatic housing leak test at 1.5× rated pressure, and a 15-minute no-load run-in test. Test reports accompany every shipment.

🏭 ¿Por qué elegir Ever-power Australia Mower Gearbox Co.,Ltd.?

What sets Ever-power Australia Mower Gearbox Co.,Ltd. apart is our ability to scale seamlessly from engineering support for a single unique application to mass production of 78000+ units per year without any compromise in quality. Our 11 gear production lines, climate-controlled metrology lab, and experienced technical sales team work together to make your sourcing process as efficient as your fieldwork needs to be.

eje de transmisión de la toma de fuerza

📞 Get Your EP-RTD50 Quote Today

Stop losing field time to gearbox failures. The EP-RTD50 is built to run all season without skipping a beat. Talk to our specialists about the right configuration for your operation.

Solicitar presupuestoVer todos los productos

Productos relacionados