विवरण
EP-RTD50 — The Operator’s Choice in Rotary Tiller Center Gearbox Technology
Trusted by professional farmers and contractors worldwide, the EP-RTD50 घास काटने की मशीन का गियरबॉक्स combines 50 HP capacity with robust 25 Kg (approx.) cast construction. Available in N/A ratio configurations, it adapts to your mowing conditions with ease.
📈 EP-RTD50 Technical Specifications
| पैरामीटर | विनिर्देश |
|---|---|
| मॉडल संख्या | EP-RTD50 |
| गियरबॉक्स प्रकार | Rotary Tiller Center Gearbox |
| गियर अनुपात(ओं) | N/A |
| दांतों की संरचना | N/A |
| गियर मॉड्यूल | N/A |
| मूल्यांकित शक्ति | 50 HP |
| इनपुट गति | 540 आरपीएम |
| इनपुट/आउटपुट शाफ्ट | Flange mount |
| शुद्ध वजन | 25 Kg (approx.) |
| गियर सामग्री | 20CrMnTi मिश्र धातु इस्पात, कार्बराइज्ड और कठोर, एचआरसी 58-62 |
| आवास सामग्री | ग्रे कास्ट आयरन (HT200/HT250) |
| सील सुरक्षा | मल्टी-लिप एनबीआर/एफकेएम ऑयल सील, आईपी65+ रेटिंग |
| स्नेहन | SAE 80W-90 या 85W-140 EP गियर ऑयल |
| सतह का उपचार | ई-कोट प्राइमर + पॉलिएस्टर पाउडर कोट, लाल रंग का फिनिश |
⭐ मुख्य विशेषताएं और इंजीनियरिंग संबंधी लाभ
⚖
Hot-Dip Galvanized Mounting Hardware
Grade 10.9 mounting bolts hot-dip galvanized to AS/NZS 4680, resisting corrosion in coastal and high-humidity farming regions like northern Queensland and Waikato.
🚀
Field-Rebuildable Modular Design
All internal components — gears, bearings, seals, shafts — are individually replaceable in the field with standard hand tools, eliminating the need to send units away for factory rebuild.
💪
Dual-Lip NBR Oil Seals
Twin-lip nitrile seals with integrated dust excluder on every shaft exit, rated to IP65, preventing moisture and crop debris from entering the gear chamber.
⚙
Optimized Lightweight Geometry
Finite-element-optimized casing walls remove unnecessary material while maintaining full load capacity, reducing installed weight by 15% versus previous-generation housings.
⚗
20CrMnTi Forged Gear Blanks
All gear blanks are closed-die forged (not cast) to align grain flow with tooth roots, increasing bending fatigue strength by 30% over alternative casting methods.
🔒
97%+ Mechanical Efficiency Rating
Super-finished gear flanks (Ra ≤ 0.6 μm) and optimized tooth contact deliver over 97% efficiency, reducing fuel consumption and allowing cooler continuous operation.
🔧 उपकरण अनुकूलता और क्रॉस-रेफरेंस
🔄 Cross-Reference Compatibility for EP-RTD50
The EP-RTD50 is engineered as a direct replacement or upgrade for gearboxes fitted to equipment from leading manufacturers including:
Pöttinger • TAFE • McCormick • Mitsubishi • Zoomlion • Case IH • Land Pride • Mahindra
अस्वीकरण: ऊपर दिए गए ब्रांड नाम केवल अनुकूलता की पहचान के लिए संदर्भित हैं। एवर-पावर ऑस्ट्रेलिया मोवर गियरबॉक्स कंपनी लिमिटेड किसी भी सूचीबद्ध निर्माता से संबद्ध नहीं है, न ही उनके द्वारा समर्थित या अधिकृत है। सभी ट्रेडमार्क उनके संबंधित स्वामियों के स्वामित्व में हैं।
📚 गियरबॉक्स चयन गाइड
Getting gearbox selection right the first time saves money and headaches. Here is a systematic approach to specifying the EP-RTD50:
🌾 विशिष्ट अनुप्रयोग परिदृश्य
🌾 Pipeline and powerline easement clearing
🚘 Riparian zone and waterway bank vegetation control
🌱 Rotary tiller seedbed preparation for row crops
⛰ Land clearing of light to medium regrowth scrub
🌳 Hay field pre-cut conditioning and topping
🛠 स्थापना और सेटअप गाइड
- वारंटी और सर्विस अंतराल को ट्रैक करने के लिए, अपनी रखरखाव लॉग बुक में इंस्टॉलेशन की तारीख, ट्रैक्टर आवर मीटर रीडिंग और गियरबॉक्स सीरियल नंबर दर्ज करें।
- If replacing an existing unit, drain the old oil completely, remove mounting fasteners, and carefully lower the old gearbox. Photograph the orientation and note any shim washers used.
- Insert all mounting bolts finger-tight first, then torque to specification in a cross (star) pattern to ensure even clamping. Typical torque: 80-120 Nm depending on bolt size.
- With the implement raised and blades clear of the ground, engage the PTO at low idle speed. Listen for any unusual noise and observe for vibration or oil leaks.
- Verify that the mower implement safety chain or restraint is properly connected to prevent the gearbox from contacting the ground if the three-point hitch fails.
- Apply a thin, even bead of RTV silicone sealant to the mounting flange face if a pre-cut gasket is not included with the new gearbox.
- Connect the PTO drive shaft to the gearbox input spline. Push the shaft on fully and verify it telescopes freely through the complete range of three-point hitch travel.
❓ अक्सर पूछे जाने वाले प्रश्न
⭐ ग्राहक समीक्षाएँ और फील्ड रिपोर्ट
स्टीव एच.
★★★★★
📍 पश्चिमी ऑस्ट्रेलिया, ऑस्ट्रेलिया
Runs noticeably cooler than the old gearbox it replaced. The improved cooling design and better oil volume are making a real difference.
Miguel S.
★★★★★
📍 São Paulo, Brazil
We tested this against a competitor unit side by side. This one runs quieter, stays cooler, and the oil stayed cleaner over 200 hours.
Erik S.
★★★★★
📍 Skåne, Sweden
First purchase from this manufacturer and I am thoroughly impressed. Build quality, documentation, and support were all top-notch.
Maria G.
★★★★☆
📍 Alentejo, Portugal
After comparing specifications across five brands, this offered the best combination of materials, weight, and price. No regrets.
David L.
★★★★☆
📍 Canterbury, New Zealand
Fitted to my pasture topper last season. Over 400 hours and counting — zero leaks, minimal noise. Excellent value for a professional-grade unit.
⚖ EP-RTD50 vs. Low-Cost Alternatives
| विशेषता | EP-RTD50 (Ever-power) | सामान्य/कम लागत वाला विकल्प |
|---|---|---|
| Engineering Support | ✔ Free Application Engineering & Cross-Reference | ✘ No Technical Support Provided |
| Oil Seals | ✔ Double-Lip NBR/FKM, IP65 Rated | ✘ Single-Lip NBR, No Dust Lip |
| Dimensional Tolerance | ✔ ISO IT6-IT7, CNC Machined Throughout | ✘ ISO IT9-IT10, Partially Hand-Finished |
| Documentation | ✔ Full Drawings, Cross-Reference, Install Guide | ✘ Basic Single-Page Spec Sheet Only |
| Fastener Protection | ✔ Zinc-Flake Coated Grade 10.9 Bolts | ✘ Plain Steel Grade 8.8, Corrodes and Seizes |
| Oil Level Check | ✔ Clear Sight Glass + Dipstick Standard | ✘ No Sight Glass, Must Remove Fill Plug |
| After-Sales Support | ✔ Dedicated Technical Team, Video Call Support | ✘ Email Only, 1-2 Week Response Time |
🔄 संबंधित उत्पाद और सहायक उपकरण
हमारी संपूर्ण रेंज देखें कृषि संचरण घटक including PTO shafts, gears, pulleys, chains, and sprockets — all engineered to integrate seamlessly with EP-RTD50 gearboxes.
🏆 प्रमाणन और गुणवत्ता मानक
Our production of the EP-RTD50 follows ISO 9001:2015 requirements with additional internal standards that exceed baseline certification. Key processes include: 100% CMM dimensional verification, Vickers hardness mapping on every gear, hydrostatic housing leak test at 1.5× rated pressure, and a 15-minute no-load run-in test. Test reports accompany every shipment.
🏭 एवर-पावर ऑस्ट्रेलिया मोवर गियरबॉक्स कंपनी लिमिटेड को क्यों चुनें?
What sets Ever-power Australia Mower Gearbox Co.,Ltd. apart is our ability to scale seamlessly from engineering support for a single unique application to mass production of 78000+ units per year without any compromise in quality. Our 11 gear production lines, climate-controlled metrology lab, and experienced technical sales team work together to make your sourcing process as efficient as your fieldwork needs to be.
📞 Get Your EP-RTD50 Quote Today
Stop losing field time to gearbox failures. The EP-RTD50 is built to run all season without skipping a beat. Talk to our specialists about the right configuration for your operation.
