توضیحات محصول
توضیحات محصول
NB142 series adopts the design of integrating its sun gear and input shaft, the design of integrating its output structure. Using high- strength bearing, the product itself is characterized by high load, high precision, and low noise, focusing on the use of automation equipment, various types of packaging, printing, lithium-ion, LCD screens, robots, palletizers, woodworking, doors and windows and other industry sectors.
Product Name: High Precision Planetary Gearbox
Product Series: NB142 Series
Product features: high precision, high load, low noise.
توضیحات محصول:
Integrated design concept with high strength bearings ensure the product itself is durable and efficient
A variety of output ideas such as shaft output, flange and gear are available.
1 arc minute ≤ backlash ≤ 3 arc minutes
Reduction ratios ranging from 3 to 100
Frame design: increases torque and optimises power transmission
Optimised selection of oil seals: reduces friction and laminate transmission efficiency
Protection class IP65
Warranty: 2 years
Our Advantages
High precision
High load
Low noise
Detailed Photos
Product Parameters
| Segment number | Single segment | ||||||||
| Ratio | i | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
| Rated output torque | Nm | 320 | 510 | 610 | 570 | 520 | 470 | 420 | 420 |
| Emergency stop torque | Nm | Three times of Maximum Output Torque | |||||||
| Rated input speed | Rpm | 3000 | |||||||
| Max input speed | Rpm | 6000 | |||||||
| Ultraprecise backlash | arcmin | ≤1 | |||||||
| Precision backlash | arcmin | ≤3 | |||||||
| Standard backlash | arcmin | ≤5 | |||||||
| Torsional rigidity | Nm/arcmin | 50 | |||||||
| Max.bending moment | Nm | 9400 | |||||||
| Max.axial force | N | 4700 | |||||||
| Service life | hr | 20000(10000 under continuous operation) | |||||||
| Efficiency | % | ≥97% | |||||||
| Weight | kg | 14.5 | |||||||
| Operating Temperature | ºC | -10ºC~+90ºC | |||||||
| Lubrication | Synthetic grease | ||||||||
| Protection class | IP64 | ||||||||
| Mounting Position | All directions | ||||||||
| Noise level(N1=3000rpm,non-loaded) | dB(A) | ≤65 | |||||||
| Rotary inertia | Kg·cm² | 9.21 | 7.54 | 7.42 | 7.25 | 7.14 | 7.07 | 7.04 | 7.03 |
Applicable Industries
Packaging Machinery Mechanical Hand Textile Machinery
Non Standard automation Machine Tool Printing Equipment /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| کاربرد: | Motor, Machinery, Marine, Agricultural Machinery |
|---|---|
| سختی: | سطح دندانه سخت شده |
| نصب: | All Direction |
| طرح بندی: | Planetary Gearbox |
| شکل چرخ دنده: | Helical Gear |
| مرحله: | تک مرحلهای |
| سفارشی سازی: |
موجود است
| درخواست سفارشی |
|---|
Adjusting Tension on a Mower Gearbox Belt
Proper tension adjustment of the gearbox belt in your mower is crucial for optimal performance and belt longevity. Follow these steps to adjust the tension:
- Preparation: Turn off the mower’s engine and disconnect the spark plug wire to ensure safety.
- Locate the Adjustment Mechanism: Identify the tension adjustment mechanism on the mower. This could be a tensioning bolt, an adjustable bracket, or another mechanism depending on the mower model.
- Loosen Bolts: If your mower has tensioning bolts, slightly loosen the mounting bolts securing the gearbox in place. This allows the gearbox to move and adjust tension.
- Adjust Tension: Use the tension adjustment mechanism to increase or decrease the tension on the belt. Refer to your mower’s manual for recommended tension specifications.
- Check Tension: After adjusting, check the tension by pressing down on the belt at a midpoint between the pulleys. The belt should give a little, but not excessively. Also, check for proper alignment of the pulleys.
- Tighten Bolts: Once the tension is set correctly, tighten the mounting bolts of the gearbox to secure it in place.
- Test Operation: Reconnect the spark plug wire and start the mower to observe the belt’s operation. Listen for any unusual noises and monitor the belt for proper engagement with the pulleys.
Regularly checking and adjusting the tension of the gearbox belt ensures efficient power transmission and prevents premature wear. If you’re unsure about the proper tension adjustment, consult your mower’s manual or seek assistance from a professional.
Using Synthetic Oil in Your Mower Gearbox
Yes, you can use synthetic oil in your mower gearbox, and in many cases, it’s recommended for its benefits. Synthetic oils offer several advantages over conventional oils:
- Improved Lubrication: Synthetic oils provide better lubrication, reducing friction and wear on gearbox components.
- Temperature Stability: Synthetic oils perform well in a wide range of temperatures, ensuring consistent lubrication in both hot and cold conditions.
- Resistance to Breakdown: Synthetic oils have a higher resistance to thermal breakdown, which helps them maintain their properties and effectiveness over time.
- Extended Oil Change Intervals: Synthetic oils often last longer than conventional oils, allowing for extended oil change intervals.
- Reduced Deposits: Synthetic oils tend to produce fewer deposits and sludge in the gearbox, keeping it cleaner.
Before switching to synthetic oil, it’s important to:
- Check the manufacturer’s recommendations: Confirm whether your mower’s gearbox is compatible with synthetic oil.
- Choose the right viscosity: Select a synthetic oil with the appropriate viscosity rating for your mower’s gearbox.
- Ensure proper mixing: If you’re switching from conventional to synthetic oil, it’s a good practice to thoroughly drain the old oil before adding the synthetic oil.
Using synthetic oil can contribute to the overall performance and longevity of your mower gearbox. However, always refer to your mower’s manual and the oil manufacturer’s recommendations for the best results.
عملکرد گیربکس ماشین چمن زنی
گیربکس ماشین چمنزنی از طریق مجموعهای از چرخدندهها و اجزایی که با هم کار میکنند تا قدرت را منتقل کرده و حرکت چرخشی موتور را به عمل برش تیغهها تبدیل کنند، عمل میکند. در اینجا نحوه عملکرد یک گیربکس معمولی ماشین چمنزنی آورده شده است:
- ورودی برق: گیربکس ماشین چمن زنی، نیرو را از طریق یک شفت محرک از موتور ماشین چمن زنی دریافت می کند.
- کاهش دنده: گیربکس شامل مجموعهای از چرخدندهها است که با نسبتهای مشخصی چیده شدهاند تا به گشتاور و تبدیل سرعت مورد نیاز دست یابند. چرخدنده ورودی که به شفت محرک متصل است، با یک یا چند چرخدنده میانی درگیر میشود.
- تبدیل گشتاور: با چرخش چرخدنده ورودی، چرخدندههای میانی نیز به حرکت در میآیند. چیدمان چرخدندهها در گیربکس منجر به کاهش سرعت و افزایش گشتاور میشود. این امر برای تأمین نیروی لازم برای برش پوشش گیاهی توسط تیغههای برش ضروری است.
- اتصال تیغه: شفت خروجی گیربکس به تیغههای برش متصل است. با چرخش شفت خروجی گیربکس، گشتاور به تیغهها منتقل میشود و باعث چرخش آنها میگردد.
- چرخش تیغه: حرکت چرخشی تیغهها همان چیزی است که آنها را قادر میسازد تا چمن و سایر پوششهای گیاهی را برش دهند. گشتاور افزایش یافته تولید شده توسط گیربکس به تیغهها اجازه میدهد تا به طور مؤثر اقدامات برش یا مالچپاشی را انجام دهند.
گیربکسهای ماشین چمنزنی مدرن برای کارایی، دوام و دقت طراحی شدهاند. آنها اغلب مجهز به بلبرینگ، آببند و روانکاری هستند تا اصطکاک را به حداقل برسانند و عملکرد روان را تضمین کنند. برخی از گیربکسهای ماشین چمنزنی همچنین شامل ویژگیهای اضافی مانند ارتفاع برش قابل تنظیم، هماهنگسازی تیغه و کنترل جهت برای افزایش تطبیقپذیری ماشین چمنزنی هستند.
editor by CX 2024-04-30
