Keterangan
Built to Last: EP-01-661 Industrial Rotary Cutter Gearbox
Itu EP-01-661 is built for the operator who values uptime above all else. This gearbox pertanian handles 80 HP through precision-machined spiral bevel gears, supported by premium bearings and multi-stage sealing for maximum service life.
📈 EP-01-661 Technical Specifications
| Parameter | Spesifikasi |
|---|---|
| Nomor Model | EP-01-661 |
| Jenis Gearbox | Industrial Rotary Cutter Gearbox |
| Rasio Gigi | 1:1.3 |
| Konfigurasi Gigi | 26/20 |
| Modul Gigi | 5.644 |
| Daya Terukur | 80 HP |
| Kecepatan Masukan | 540 rpm |
| Poros Masukan/Keluaran | 1 3/4 Z20 |
| Berat Bersih | 57.5 Kg |
| Bahan Roda Gigi | Baja Paduan 20CrMnTi, Dikarburisasi & Dikeraskan HRC 58-62 |
| Bahan Perumahan | Ductile Cast Iron (QT450-10) |
| Perlindungan Segel | Segel Oli Multi-Bibir NBR/FKM, Peringkat IP65+ |
| Pelumasan | Oli roda gigi SAE 80W-90 atau 85W-140 EP |
| Perawatan Permukaan | Primer E-Coat + Lapisan Serbuk Poliester, Warna Merah |
⭐ Fitur Utama & Keunggulan Teknik
⚗
Five-Stage Hermetic Sealing
Labyrinth + double Viton + pressurized grease chamber + armored shield maintain hermetic integrity even during full submersion or high-pressure washdown.
🔒
8-Bolt Forged 4340 Output Hub
Nickel-chrome-moly steel output hub rated for 80 kg blade assemblies and sustained cutting torques above 2,000 Nm — our strongest output interface.
⚡
FKM Viton High-Temperature Seals
Fluoroelastomer shaft seals rated from -25 °C to +200 °C, maintaining leak-free performance through the extreme seasonal temperature swings encountered in all-weather farming.
🔄
Sub-180 mm Hub Profile
Slim vertical envelope allows close disc spacing for continuous, overlap-free cutting — critical for clean swath formation in thick alfalfa and mixed-grass stands.
🔨
Self-Contained Bearing Cartridges
Pre-loaded, pre-lubricated cartridge bearings drop in for rapid field replacement, slashing unplanned downtime from bearing failures by up to 70%.
🌡
Synthetic PAO Fill, -40 to +150 °C
Factory-filled with polyalphaolefin gear oil maintaining viscosity stability from arctic cold starts to sustained high-temperature tropical operation without degradation.
🔧 Kompatibilitas dan Referensi Silang Peralatan
🔄 Cross-Reference Compatibility for EP-01-661
The EP-01-661 is engineered as a direct replacement or upgrade for gearboxes fitted to equipment from leading manufacturers including:
Zoomlion • Case IH • Land Pride • Mahindra • Pöttinger • TAFE • McCormick • Mitsubishi
Penafian: Nama merek di atas hanya dirujuk untuk identifikasi kompatibilitas. Ever-power Australia Mower Gearbox Co.,Ltd. tidak berafiliasi dengan, didukung oleh, atau diotorisasi oleh produsen mana pun yang tercantum. Semua merek dagang milik pemiliknya masing-masing.
📚 Panduan Pemilihan Transmisi
The EP-01-661 covers a specific performance envelope. Use these selection criteria to verify it aligns with your operational parameters:
🌾 Skenario Aplikasi Umum
🌾 Estate, golf course, and sportsfield maintenance
🚘 Flail mulching of pruning residue in fruit plantations
🌱 Orchard and vineyard floor maintenance between rows
⛰ Mining site vegetation rehabilitation and control
🌳 Forestry site preparation and plantation row clearing
🛠 Panduan Instalasi & Pengaturan
- Run the gearbox at no load for 5-10 minutes, then shut down and re-check oil level — new seals and bearings often absorb a small amount of initial oil.
- Bersihkan permukaan tempat pemasangan alat secara menyeluruh, hilangkan semua karat, sisa material paking lama, serpihan cat, dan kotoran yang dapat menghalangi kontak yang rapat dengan flensa gearbox.
- Posisikan kotak roda gigi pada baut atau lubang pemasangan, pastikan poros input menghadap PTO traktor dan poros output sejajar dengan hub pisau atau rotor.
- Pastikan poros PTO memiliki tumpang tindih spline minimal 50% di semua posisi pengoperasian. Tumpang tindih yang tidak memadai menyebabkan keausan spline yang cepat dan potensi pemisahan poros.
- Catat tanggal pemasangan, pembacaan meter jam traktor, dan nomor seri gearbox dalam buku catatan perawatan Anda untuk keperluan garansi dan pelacakan interval servis.
- Jika mengganti unit yang sudah ada, tiriskan oli lama sepenuhnya, lepaskan pengencang pemasangan, dan turunkan gearbox lama dengan hati-hati. Foto orientasinya dan catat ring pengganjal yang digunakan.
- Pasang semua baut pemasangan dengan cara dikencangkan secukupnya terlebih dahulu, kemudian kencangkan sesuai spesifikasi dengan pola silang (bintang) untuk memastikan pengencangan yang merata. Torsi tipikal: 80-120 Nm tergantung pada ukuran baut.
❓ Pertanyaan yang Sering Diajukan
⭐ Ulasan Pelanggan & Laporan Lapangan
Bruce K.
★★★★★
📍 New South Wales, Australia
We run these on land management in high-temperature conditions. Absolutely no overheating after 600+ hours. Thermals are well managed.
Erik S.
★★★★★
📍 Skåne, Sweden
Perfect for our pasture maintenance. The compact design fits between rows with room to spare. Very reliable day-to-day operation.
Maria G.
★★★★★
📍 Alentejo, Portugal
Good quality for the price. Our crew runs these gearboxes hard and they hold up better than previous brands we have tried.
David L.
★★★★☆
📍 Canterbury, New Zealand
We fitted six of these across our fleet. Every single unit has performed flawlessly through two complete cutting seasons.
Andrei M.
★★★★☆
📍 Krasnodar, Russia
Excellent for paddock clearing. The split-line O-ring seal makes maintenance easy and keeps unplanned downtime to a minimum.
⚖ EP-01-661 vs. Low-Cost Alternatives
| Fitur | EP-01-661 (Ever-power) | Alternatif Generik / Murah |
|---|---|---|
| Documentation | ✔ Full Drawings, Cross-Reference, Install Guide | ✘ Basic Single-Page Spec Sheet Only |
| Fastener Protection | ✔ Zinc-Flake Coated Grade 10.9 Bolts | ✘ Plain Steel Grade 8.8, Corrodes and Seizes |
| Oil Level Check | ✔ Clear Sight Glass + Dipstick Standard | ✘ No Sight Glass, Must Remove Fill Plug |
| After-Sales Support | ✔ Dedicated Technical Team, Video Call Support | ✘ Email Only, 1-2 Week Response Time |
| Engineering Support | ✔ Free Application Engineering & Cross-Reference | ✘ No Technical Support Provided |
| Oil Seals | ✔ Double-Lip NBR/FKM, IP65 Rated | ✘ Single-Lip NBR, No Dust Lip |
| Dimensional Tolerance | ✔ ISO IT6-IT7, CNC Machined Throughout | ✘ ISO IT9-IT10, Partially Hand-Finished |
🔄 Related Products & Accessories
Browse our complete range of agricultural transmission components including PTO shafts, gears, pulleys, chains, and sprockets — all engineered to integrate seamlessly with EP-01-661 gearboxes.
🏆 Certifications & Quality Standards
Manufactured under ISO 9001:2015 and audited annually by international OEM customers, the EP-01-661 represents our commitment to world-class quality. Gear material certificates (3.1), heat-treatment records, bearing lot traceability, and final inspection reports are maintained for every production batch and available upon customer request.
🏭 Why Choose Ever-power Australia Mower Gearbox Co.,Ltd.?
At Ever-power Australia Mower Gearbox Co.,Ltd., we are not just a gearbox factory — we are a full-service power transmission partner. From initial application engineering and 3D prototype modelling through to volume production, global logistics, and after-sales technical support, we manage the complete product lifecycle. Our 18500 m² facility in China is audited annually by international OEM customers and consistently rated among the top-tier suppliers in the agricultural transmission sector.
📞 Get Your EP-01-661 Quote Today
Need the EP-01-661 shipped fast? In-stock standard models dispatch within 3-5 business days. Contact us now to confirm availability and lock in today’s pricing before your next mowing season.
