EP-01-707 Lawn Mower Gearbox

EP-01-707 Lawn Mower Gearbox

The EP-01-707 pairs a 1:1.44 ratio with module 6 gears and 1 3/4 Z20 spline input to deliver 60 HP reliably. Municipal councils and highway departments select this model for its balance of output speed, torque, and service weight — heavy enough for durability, light enough for standard three-point hitch mounting.

商品コード: 42432a702cff カテゴリー: タグ: , , , ,

説明


EP-01-707 — Professional-Grade Medium-Duty Rotary Cutter Gearbox for Agricultural Mowing

の EP-01-707 is a purpose-engineered lawn mower gearbox delivering reliable right-angle power transmission at 60馬力 with 540回転/分 PTO input. Its spiral bevel gears and sealed construction ensure consistent performance across thousands of operating hours in demanding field conditions.

EP-01-707 Medium-Duty Rotary Cutter Gearbox

📈 EP-01-707 Technical Specifications

パラメータ 仕様
型番 EP-01-707
ギアボックスタイプ Medium-Duty Rotary Cutter Gearbox
ギア比 1:1.44
歯の形状 23/16
ギアモジュール 6
定格電力 60馬力
入力速度 540回転/分
入力/出力シャフト 1 3/4 Z20 / Taper spline
正味重量 37 Kg
ギア素材 20CrMnTi合金鋼、浸炭焼入れ済み、硬度HRC 58-62
ハウジング材 ねずみ鋳鉄（HT200/HT250）
シール保護 マルチリップNBR/FKMオイルシール、IP65+規格準拠
潤滑 SAE 80W-90または85W-140 EPギアオイル
表面処理 Eコートプライマー＋ポリエステル粉体塗装、赤色仕上げ

⭐ 主な特長とエンジニアリング上の利点

🔒

Pressurized Internal Oil Pump

Gear-driven micro-pump maintains positive lubrication pressure at all critical contacts, enabling safe operation on slopes exceeding 40° without oil starvation.

⚡

Lightweight AlSi7Mg T6 Housing

Aluminum-silicon alloy housing with T6 temper provides excellent thermal conductivity for cooler operation and natural corrosion resistance in wet haymaking environments.

🔄

Sealed-for-Life Bearing Pack

Bearings factory-packed with Mobil XHP 222 high-temp grease, delivering 1,500 hours of maintenance-free disc mower operation before re-greasing is needed.

🔨

Space-Optimized Thin-Wall Enclosure

Compact aluminum or thin-wall iron casing for applications where overall gearbox envelope and weight are hard-limited by implement frame constraints.

🌡

Multi-Position Bolt Pattern

Versatile mounting interface with tapped holes at 0°, 90°, and 180° orientations, fitting a wide range of implement frame geometries without adapter plates.

🛠

E-Coat + Powder Coat Finish

25 μm zinc-rich e-coat primer plus 80 μm polyester powder topcoat provides 1,000+ hours of ASTM B117 salt-spray corrosion resistance.

農業用芝刈り機のギアボックス

🔧 機器の互換性と相互参照

🔄 Cross-Reference Compatibility for EP-01-707

The EP-01-707 is engineered as a direct replacement or upgrade for gearboxes fitted to equipment from leading manufacturers including:

Massey Ferguson • Deutz-Fahr • Woods • Krone • McConnel • Fendt • Iseki • YTO

免責事項：上記のブランド名は、互換性確認のためのみに記載されています。Ever-power Australia Mower Gearbox Co.,Ltd.は、記載されているメーカーとは一切提携、承認、または認可を受けていません。すべての商標は、それぞれの所有者に帰属します。

📚 ギアボックス選定ガイド

Choosing the right mower gearbox is critical for implement performance and longevity. Use the following criteria when evaluating the EP-01-707:

📌 ギア比とブレード先端速度のマッチング
For the EP-01-707 with ratio(s) 1:1.44, calculate your required blade tip speed: typically 4,500-5,500 m/min for standard rotary cutters, 3,000-4,000 m/min for heavy brush cutting, and 5,500-6,500 m/min for fine finish mowing. Output RPM = PTO RPM ÷ ratio. Multiply by blade diameter to get tip speed.
📌トラクターPTO馬力に対する出力定格の選定
The EP-01-707 is rated at 60 HP. Always select a gearbox rated at or above your tractor’s maximum PTO horsepower. For shock-load applications (mulching, brush clearing), add a 25-30% safety margin: a 60 HP tractor should use a 75+ HP rated gearbox.
📌 540 RPM vs 1000 RPM PTO Selection
The EP-01-707 operates at 540 rpm. Most rotary mowers use 540 RPM PTO. The 1000 RPM standard is for larger implements on high-HP tractors. Never connect a 540 RPM gearbox to a 1000 RPM PTO — the doubled speed will destroy bearings and gears within minutes.
📌 Cast Iron Housing vs Aluminium Housing
The EP-01-707 uses a grey cast iron housing. Cast iron excels in vibration damping, impact resistance, and heat dissipation — ideal for rough, rocky mowing conditions. Aluminium is lighter and more corrosion-resistant, better suited to wet environments and weight-sensitive implements.
📌 標準カタログ vs カスタム仕様
The EP-01-707 is available as a standard catalog item shipping in 3-5 days. If your application requires a non-standard ratio, shaft type, or mounting configuration, our engineering team offers custom designs with 4-6 week lead times. Minimum order quantities may apply.

🌾 一般的なアプリケーションシナリオ

🌾 Firebreak establishment and maintenance mowing

🚘 Disc mowing of grass and legume hay crops

🌱 Airfield perimeter and runway strip grass management

⛰ Sugar cane and crop stubble field mulching

🌳 Dairy farm laneway and yard surround maintenance

エバーパワー・オーストラリア・モアギアボックス株式会社の製造施設

🛠 インストールとセットアップガイド

  1. After the first 10 hours of operation, re-torque all mounting bolts to specification and verify oil level. Perform the first oil drain and refill at 50 hours.
  2. Disconnect the tractor PTO shaft and safely support the mower implement on jack stands or blocks before beginning the gearbox installation procedure.
  3. For units weighing over 25 kg, use a chain hoist, engine crane, or two-person lift to position the gearbox. Never attempt to lift heavy gearboxes solo.
  4. Fill the gearbox with the recommended gear oil (SAE 80W-90 or 85W-140 EP) to the level indicated on the sight glass or dipstick. Do not overfill.
  5. 全負荷運転を行う前に、段階的な慣らし運転を行ってください。まず、スロットルを半分開けて30分間運転し、次にスロットルを4分の3開けて30分間運転してから、PTOを全開速度で運転してください。
  6. 定規を使って、作業機の取り付け面が平坦かどうかを点検してください。0.5mmを超える歪みがある場合は、新しいギアボックスを取り付ける前に修正する必要があります。
  7. 運転中の振動による緩みを防ぐため、すべての取り付けボルトにNord-Lockワッシャーまたはねじロック剤を使用してください。

❓よくある質問

❓ このギアボックスは動作中にどれくらい騒音が出ますか？

当社のスパイラルベベル設計は、定格負荷時において1メートル離れた場所で72～78dB(A)の騒音レベルを実現しており、ストレートベベル設計（通常82～88dB）に比べて大幅に静音化されています。作業者はギアノイズの著しい低減を実感できます。

❓ What is the difference between ratio options?

Ratio determines the speed/torque trade-off at the output. 1:1 maintains PTO speed (high blade RPM); 1:1.93 nearly halves output speed while doubling torque. Choose based on your target blade tip speed and vegetation density.

❓ What is the lead time for standard models?

In-stock standard models ship within 3-5 business days. For models requiring custom ratios or configurations, typical lead time is 4-6 weeks. Rush production is available for urgent requirements.

❓ How do I select the right gear ratio?

Match the ratio to your blade tip speed target. Lower ratios (e.g. 1:1) give higher blade RPM for finish mowing; higher ratios (e.g. 1:1.93 or above) trade speed for torque, ideal for thick brush. Calculate: output RPM = input RPM ÷ ratio.

❓ What is the expected operational lifespan?

With proper maintenance, our gearboxes typically deliver 3,000 to 5,000 operating hours. Many units in the field have exceeded 6,000 hours. Lifespan depends on operating load, maintenance compliance, and field conditions.

⭐ お客様の声と現場レポート

★★★★★

📍 Victoria, Australia

Good quality for the price. Our crew runs these gearboxes hard and they hold up better than previous brands we have tried.

★★★★★

📍 アメリカ合衆国アイオワ州

We fitted six of these across our fleet. Every single unit has performed flawlessly through two complete cutting seasons.

★★★★★

📍 Faisalabad, Pakistan

Excellent for orchard floor management. The cooling fin design makes maintenance easy and keeps unplanned downtime to a minimum.

★★★★☆

📍 Poltava, Ukraine

Runs noticeably cooler than the old gearbox it replaced. The improved cooling design and better oil volume are making a real difference.

★★★★☆

📍 Córdoba, Argentina

競合他社製品と並べてテストした結果、本製品はより静かに作動し、発熱も少なく、200時間以上使用してもオイルが汚れずにきれいな状態を保っていました。

農業用ギアボックスシリーズ

⚖ EP-01-707 vs. Low-Cost Alternatives

特徴 EP-01-707 (Ever-power) ジェネリック／低価格代替品
Drain Plug ✔ Magnetic Plug Captures Wear Particles ✘ Standard Plug, No Particle Capture
Traceability ✔ Laser-Etched Serial, Full Material Records ✘ No Serial Number, No Traceability
Housing Machining ✔ 5-Axis CNC, IT6 Bore Tolerance ✘ 3-Axis CNC or Manual, IT9 Bore Tolerance
Spare Parts Availability ✔ Full Inventory, Ships Within 24 Hours ✘ Limited Stock, 4-8 Week Back-Order
Lead Time ✔ 3-5 Days Standard, 4-6 Weeks Custom ✘ 8-12 Weeks, No Expedite Option
Gear Accuracy ✔ AGMA Class 8-10, CNC Ground Post Heat-Treatment ✘ AGMA Class 5-6, Hobbed Only, No Grinding
Oil Capacity ✔ Generous Sump for Extended Cooling, Sight Glass ✘ Minimal Oil Volume, No Level Indicator

🔄関連商品・アクセサリー

🏆 認証と品質基準

Our manufacturing facility holds ISO 9001:2015 quality management and ISO 14001:2015 environmental management certifications. All gear steel is supplied with EN 10204 Type 3.1 mill test certificates. Heat treatment processes are monitored per CQI-9 (Special Process: Heat Treat System Assessment). Every EP-01-707 undergoes 100% dimensional inspection and functional testing before shipment.

🏭 Ever-power Australia Mower Gearbox Co.,Ltd.を選ぶ理由とは？

At Ever-power Australia Mower Gearbox Co.,Ltd., we have invested over two decades building one of the most advanced agricultural gearbox production facilities in the Asia-Pacific region. Our 19000 m² campus integrates in-house forging, CNC gear cutting, automated heat treatment, precision grinding, and assembly under one roof — giving us end-to-end quality control that outsourced manufacturers simply cannot match. We produce 59000 gearbox units annually, serving OEM partners and distributors across 49+ countries on six continents, with particular strength in the Australian, North American, and European markets.

PTO駆動シャフト

📞 Get Your EP-01-707 Quote Today

Ready to boost your mowing productivity with the EP-01-707? Our application engineers can match this gearbox to your specific tractor and implement — get a tailored recommendation today.

見積もりを依頼する全商品を見る

関連商品