EP20.100J.01WW Lawn Mower Gearbox

EP20.100J.01WW Lawn Mower Gearbox

Despite weighing only 16 kg, the EP20.100J.01WW handles 100-120 HP through its 1:1 ratio and module 5.4 gear set — an industry-leading power-to-weight ratio. High-performance mower OEMs and racing-turf maintenance teams specify this model when minimum implement weight is as critical as maximum power throughput.

SKU: 19ac5eac77f9 Санат: Тегтер: , , , ,

Сипаттама


EP20.100J.01WW — Professional-Grade High-Power Compact Gearbox for Agricultural Mowing

The EP20.100J.01WW is a purpose-engineered lawn mower gearbox delivering reliable right-angle power transmission at 100 / 120 HP with 540 айн/мин PTO input. Its spiral bevel gears and sealed construction ensure consistent performance across thousands of operating hours in demanding field conditions.

EP20.100J.01WW High-Power Compact Gearbox

📈 EP20.100J.01WW Technical Specifications

Параметр Техникалық сипаттама
Модель нөмірі EP20.100J.01WW
Беріліс қорабының түрі High-Power Compact Gearbox
Беріліс коэффициенті(лері) 1:1
Тістердің конфигурациясы 15/15
Беріліс модулі 5.4
Номиналды қуат 100 / 120 HP
Енгізу жылдамдығы 540 айн/мин
Кіріс/шығыс білігі 1 3/8 Z6
Таза салмақ 16 Kg
Беріліс материалы 20CrMnTi қорытпасынан жасалған болат, карбюрленген және шыңдалған HRC 58-62
Корпус материалы Сұр шойын (HT200/HT250)
Тығыздағышты қорғау Көп ерінді NBR/FKM май тығыздағыштары, IP65+ рейтингі
Майлау SAE 80W-90 немесе 85W-140 EP беріліс майы
Беттік өңдеу E-Coat праймері + полиэстер ұнтақ бояуы, қызыл түсті әрлеу

⭐ Негізгі ерекшеліктері мен инженерлік артықшылықтары

🔄

Magnetic Drain Plug

Neodymium drain plug captures ferrous wear particles from break-in and normal operation, protecting gears and bearings from abrasive recirculation damage.

🔨

High-Capacity Oil Sump Design

30% larger oil volume compared to standard models, reducing operating temperature by 8-12 °C during sustained high-load mowing and extending lubricant life.

🌡

Split-Line O-Ring Seal

Precision-machined housing split line with fluorocarbon O-ring eliminates the gasket creep and re-torque requirements of traditional paper or RTV gasket joints.

🛠

Low-Backlash Preloaded Assembly

Bearing preload and controlled gear mesh clearance hold total backlash below 0.08 mm, critical for reversing-load applications and precision-cut implements.

🔬

Redundant Lubrication Groove System

Machined oil distribution grooves in the housing bore supplement splash lubrication, providing a secondary oil path to bearings if sump level drops slightly below specification.

⚖

Reinforced Grey Cast Iron Housing

HT250-grade grey iron casing with 14 mm wall thickness, ribbed for vibration damping and thermal dissipation, resisting cracking from rock strikes at mowing speed.

Ауыл шаруашылығында қолданылатын шөп шабатын беріліс қорабы

🔧 Жабдықтың үйлесімділігі және айқаспалы сілтеме

🔄 Cross-Reference Compatibility for EP20.100J.01WW

The EP20.100J.01WW is engineered as a direct replacement or upgrade for gearboxes fitted to equipment from leading manufacturers including:

Case IH • Land Pride • Mahindra • Pöttinger • TAFE • McCormick • Mitsubishi • Zoomlion

Ескерту: Жоғарыдағы бренд атаулары тек үйлесімділікті анықтау үшін ғана сілтеме жасалған. Ever-power Australia Mower Gearbox Co.,Ltd. компаниясы тізімделген ешбір өндірушімен байланысты емес, олар мақұлдамаған немесе рұқсат бермеген. Барлық сауда белгілері тиісті иелеріне тиесілі.

📚 Беріліс қорабын таңдау бойынша нұсқаулық

Choosing the right mower gearbox is critical for implement performance and longevity. Use the following criteria when evaluating the EP20.100J.01WW:

📌 Пышақтың ұшының жылдамдығына сәйкес келетін беріліс қатынасы
For the EP20.100J.01WW with ratio(s) 1:1, calculate your required blade tip speed: typically 4,500-5,500 m/min for standard rotary cutters, 3,000-4,000 m/min for heavy brush cutting, and 5,500-6,500 m/min for fine finish mowing. Output RPM = PTO RPM ÷ ratio. Multiply by blade diameter to get tip speed.
📌 Трактордың қуаттылығының өлшемі (ат күші)
The EP20.100J.01WW is rated at 100 / 120 HP. Always select a gearbox rated at or above your tractor’s maximum PTO horsepower. For shock-load applications (mulching, brush clearing), add a 25-30% safety margin: a 60 HP tractor should use a 75+ HP rated gearbox.
📌 540 RPM vs 1000 RPM PTO Selection
The EP20.100J.01WW operates at 540 rpm. Most rotary mowers use 540 RPM PTO. The 1000 RPM standard is for larger implements on high-HP tractors. Never connect a 540 RPM gearbox to a 1000 RPM PTO — the doubled speed will destroy bearings and gears within minutes.
📌 Cast Iron Housing vs Aluminium Housing
The EP20.100J.01WW uses a grey cast iron housing. Cast iron excels in vibration damping, impact resistance, and heat dissipation — ideal for rough, rocky mowing conditions. Aluminium is lighter and more corrosion-resistant, better suited to wet environments and weight-sensitive implements.
📌 Стандартты каталог және тапсырыс бойынша жасалған сипаттама
The EP20.100J.01WW is available as a standard catalog item shipping in 3-5 days. If your application requires a non-standard ratio, shaft type, or mounting configuration, our engineering team offers custom designs with 4-6 week lead times. Minimum order quantities may apply.

🌾 Әдеттегі қолдану сценарийлері

🌾 Airfield perimeter and runway strip grass management

🚘 Sugar cane and crop stubble field mulching

🌱 Dairy farm laneway and yard surround maintenance

⛰ Conservation tillage and minimum-disturbance cultivation

🌳 Railway corridor vegetation control programs

Ever-power Australia Mower Gearbox Co.,Ltd. өндіріс орны

🛠 Орнату және орнату нұсқаулығы

  1. PTO білігінің барлық жұмыс күйлерінде кемінде 50% сплайн қабаттасуы бар екеніне көз жеткізіңіз. Қабаттасудың жеткіліксіздігі сплайнның тез тозуына және біліктің ажырауына әкелуі мүмкін.
  2. Record the installation date, tractor hour meter reading, and gearbox serial number in your maintenance log for warranty and service interval tracking.
  3. If replacing an existing unit, drain the old oil completely, remove mounting fasteners, and carefully lower the old gearbox. Photograph the orientation and note any shim washers used.
  4. Insert all mounting bolts finger-tight first, then torque to specification in a cross (star) pattern to ensure even clamping. Typical torque: 80-120 Nm depending on bolt size.
  5. With the implement raised and blades clear of the ground, engage the PTO at low idle speed. Listen for any unusual noise and observe for vibration or oil leaks.
  6. Verify that the mower implement safety chain or restraint is properly connected to prevent the gearbox from contacting the ground if the three-point hitch fails.
  7. Apply a thin, even bead of RTV silicone sealant to the mounting flange face if a pre-cut gasket is not included with the new gearbox.

❓ Жиі қойылатын сұрақтар

❓ What is the lead time for standard models?

In-stock standard models ship within 3-5 business days. For models requiring custom ratios or configurations, typical lead time is 4-6 weeks. Rush production is available for urgent requirements.

❓ How do I select the right gear ratio?

Match the ratio to your blade tip speed target. Lower ratios (e.g. 1:1) give higher blade RPM for finish mowing; higher ratios (e.g. 1:1.93 or above) trade speed for torque, ideal for thick brush. Calculate: output RPM = input RPM ÷ ratio.

❓ What is the expected operational lifespan?

With proper maintenance, our gearboxes typically deliver 3,000 to 5,000 operating hours. Many units in the field have exceeded 6,000 hours. Lifespan depends on operating load, maintenance compliance, and field conditions.

❓ Is this suitable for mulching applications?

Yes. Our gearboxes are widely used on mulching mowers and brush cutters. For mulching, select a model rated 25-30% above your actual PTO horsepower to provide a safety margin against the intermittent shock loads typical of mulching.

❓ What quality inspections do you perform?

Every gearbox undergoes 100% dimensional inspection (CMM), gear tooth geometry verification (Gleason analyzer), hardness testing, oil-leak testing, and no-load run-in testing before shipment.

⭐ Тұтынушылардың пікірлері және далалық есептер

★★★★★

📍 Тасмания, Австралия

The cooling fin design is a real bonus. Saves us time in the workshop and lets us spend more hours in the paddock. Great design.

★★★★★

📍 Castilla, Spain

Майды ауыстыру оңай болды, себебі ағызу және толтыру орындары дұрыс орналастырылған. Мұндай ұсақ-түйектер инженерлік ойлауды көрсетеді.

★★★★★

📍 Mendoza, Argentina

We needed a gearbox fast after a mid-season failure. This arrived in 5 days, bolted on in an hour, and has been perfect since.

★★★★☆

📍 Bavaria, Germany

Bolt pattern matched my slasher perfectly. Quieter than the original gearbox it replaced and the oil stays clean much longer between changes.

★★★★☆

📍 Thessaly, Greece

Installed on our rotary cutter for sugarcane/crop field work. Oil seal quality is excellent — no leakage despite dusty and humid conditions.

Ауыл шаруашылығы беріліс қорабының диапазоны

⚖ EP20.100J.01WW vs. Low-Cost Alternatives

Функция EP20.100J.01WW (Ever-power) Жалпы / арзан балама
After-Sales Support ✔ Dedicated Technical Team, Video Call Support ✘ Email Only, 1-2 Week Response Time
Engineering Support ✔ Free Application Engineering & Cross-Reference ✘ No Technical Support Provided
Oil Seals ✔ Double-Lip NBR/FKM, IP65 Rated ✘ Single-Lip NBR, No Dust Lip
Dimensional Tolerance ✔ ISO IT6-IT7, CNC Machined Throughout ✘ ISO IT9-IT10, Partially Hand-Finished
Documentation ✔ Full Drawings, Cross-Reference, Install Guide ✘ Basic Single-Page Spec Sheet Only
Fastener Protection ✔ Zinc-Flake Coated Grade 10.9 Bolts ✘ Plain Steel Grade 8.8, Corrodes and Seizes
Oil Level Check ✔ Clear Sight Glass + Dipstick Standard ✘ No Sight Glass, Must Remove Fill Plug

🔄 Ұқсас өнімдер мен аксессуарлар

🏆 Сертификаттар және сапа стандарттары

Our manufacturing facility holds ISO 9001:2015 quality management and ISO 14001:2015 environmental management certifications. All gear steel is supplied with EN 10204 Type 3.1 mill test certificates. Heat treatment processes are monitored per CQI-9 (Special Process: Heat Treat System Assessment). Every EP20.100J.01WW undergoes 100% dimensional inspection and functional testing before shipment.

🏭 Неліктен Ever-power Australia Mower Gearbox Co.,Ltd. компаниясын таңдау керек?

At Ever-power Australia Mower Gearbox Co.,Ltd., we have invested over two decades building one of the most advanced agricultural gearbox production facilities in the Asia-Pacific region. Our 26000 m² campus integrates in-house forging, CNC gear cutting, automated heat treatment, precision grinding, and assembly under one roof — giving us end-to-end quality control that outsourced manufacturers simply cannot match. We produce 73000 gearbox units annually, serving OEM partners and distributors across 48+ countries on six continents, with particular strength in the Australian, North American, and European markets.

Қуат беру білігі

📞 Get Your EP20.100J.01WW Quote Today

Ready to boost your mowing productivity with the EP20.100J.01WW? Our application engineers can match this gearbox to your specific tractor and implement — get a tailored recommendation today.

Баға сұрауБарлық өнімдерді шолу

Ұқсас өнімдер