Description
EP-RC130-146 High-Power Rotary Cutter Gearbox — Precision Power Transmission for Modern Mowing
The EP-RC130-146 represents the latest in tarımsal şanzıman engineering. With 130 / 100 HP capacity, 1:1.46 / 1:1.92 ratio configuration, and 56 Kg optimized construction, it delivers the power density and reliability today’s farming operations require.
📈 EP-RC130-146 Technical Specifications
| Parameter | Specification |
|---|---|
| Model Number | EP-RC130-146 |
| Gearbox Type | High-Power Rotary Cutter Gearbox |
| Gear Ratio(s) | 1:1.46 / 1:1.92 |
| Teeth Configuration | 19/13, 27/14 |
| Gear Module | 6 / 8 |
| Rated Power | 130 / 100 HP |
| Input Speed | 540 rpm |
| Input/Output Shaft | 1 3/4 Z20, Taper spline |
| Net Weight | 56 Kg |
| Gear Material | 20CrMnTi Alloy Steel, Carburized & Hardened HRC 58-62 |
| Housing Material | Ductile Cast Iron (QT450-10) |
| Seal Protection | Multi-Lip NBR/FKM Oil Seals, IP65+ Rated |
| Yağlama | SAE 80W-90 or 85W-140 EP Gear Oil |
| Surface Treatment | E-Coat Primer + Polyester Powder Coat, Red Finish |
⭐ Key Features & Engineering Advantages
⚡
Pre-Filled EP90 Gear Lubricant
Ships factory-filled with extreme-pressure SAE 90 gear oil and includes a clear sight glass for instant oil-level verification before each operating session.
🔄
QT450-10 Ductile Iron Shell
Nodular graphite iron housing absorbs 40% more impact energy than grey iron, protecting internal components when the mower strikes concealed rocks or fence posts.
🔨
Dual 540/1000 RPM Configurability
Input shaft and gear set available in both 540 RPM and 1000 RPM PTO configurations, covering the full range of modern tractor PTO standards from a single product family.
🌡
Rapid-Release Blade Flange
Quick-disconnect output flange with self-centering pilot reduces blade swap time to under 10 minutes, cutting maintenance downtime by 60% versus bolted hubs.
🛠
Quadruple-Barrier Environmental Sealing
Labyrinth + twin Viton FKM seals + armored debris shield achieve IP67, protecting against total submersion and high-pressure cleaning equipment.
🔬
Forced-Splash Oil Distribution
Gear-driven splash channels route lubricant to every bearing and mesh zone even on hillside slopes up to 35°, preventing dry-running at extreme operating angles.
🔧 Equipment Compatibility & Cross-Reference
🔄 Cross-Reference Compatibility for EP-RC130-146
The EP-RC130-146 is engineered as a direct replacement or upgrade for gearboxes fitted to equipment from leading manufacturers including:
Land Pride • Mahindra • Pöttinger • TAFE • McCormick • Mitsubishi • Zoomlion • Case IH
Disclaimer: Brand names above are referenced solely for compatibility identification. Ever-power Australia Mower Gearbox Co.,Ltd. is not affiliated with, endorsed by, or authorized by any listed manufacturer. All trademarks belong to their respective owners.
📚 Gearbox Selection Guide
Selecting a gearbox that matches your exact requirements avoids premature wear and costly downtime. Consider these points for the EP-RC130-146:
🌾 Typical Application Scenarios
🌾 Airfield perimeter and runway strip grass management
🚘 Sugar cane and crop stubble field mulching
🌱 Dairy farm laneway and yard surround maintenance
⛰ Conservation tillage and minimum-disturbance cultivation
🌳 Railway corridor vegetation control programs
🛠 Installation & Setup Guide
- Inspect the implement mounting pad for flatness using a straightedge. Any warping exceeding 0.5 mm should be corrected before the new gearbox is installed.
- Use Nord-Lock washers or thread-locking compound on all mounting bolts to prevent vibration-induced loosening during operation.
- Run the gearbox at no load for 5-10 minutes, then shut down and re-check oil level — new seals and bearings often absorb a small amount of initial oil.
- Clean the implement mounting surface thoroughly, removing all rust, old gasket material, paint flakes, and debris that could prevent flush contact with the gearbox flange.
- Position the gearbox onto the mounting studs or bolt holes, verifying the input shaft faces the tractor PTO and the output shaft aligns with the blade hub or rotor.
- Ensure the PTO shaft has at least 50% spline overlap in all operating positions. Inadequate overlap causes rapid spline wear and potential shaft separation.
- Record the installation date, tractor hour meter reading, and gearbox serial number in your maintenance log for warranty and service interval tracking.
❓ Frequently Asked Questions
⭐ Customer Reviews & Field Reports
Steve H.
★★★★★
📍 Western Australia, Australia
The compact size was critical for our application and this model delivered. Two years running, zero problems whatsoever.
Oleksiy H.
★★★★★
📍 Poltava, Ukraine
We ordered in bulk for our dealer network. Customer return rate is near zero. That speaks volumes about reliability.
Carlos R.
★★★★★
📍 Córdoba, Argentina
Fast shipping, professional packaging, and the gearbox itself is built like a tank. Highly recommended for serious agricultural work.
Pierre L.
★★★★☆
📍 Bordeaux, France
Installed on a mulching mower that sees 8+ hours of use per day during season. Absolutely dependable. That is all I ask of a gearbox.
Mustafa O.
★★★★☆
📍 Adana, Turkey
We maintain 40+ mowers for council contracts. Switching to this brand has reduced our gearbox failure rate by over 60 percent.
⚖ EP-RC130-146 vs. Low-Cost Alternatives
| Feature | EP-RC130-146 (Ever-power) | Generic / Low-Cost Alternative |
|---|---|---|
| Oil Seals | ✔ Double-Lip NBR/FKM, IP65 Rated | ✘ Single-Lip NBR, No Dust Lip |
| Dimensional Tolerance | ✔ ISO IT6-IT7, CNC Machined Throughout | ✘ ISO IT9-IT10, Partially Hand-Finished |
| Documentation | ✔ Full Drawings, Cross-Reference, Install Guide | ✘ Basic Single-Page Spec Sheet Only |
| Fastener Protection | ✔ Zinc-Flake Coated Grade 10.9 Bolts | ✘ Plain Steel Grade 8.8, Corrodes and Seizes |
| Oil Level Check | ✔ Clear Sight Glass + Dipstick Standard | ✘ No Sight Glass, Must Remove Fill Plug |
| After-Sales Support | ✔ Dedicated Technical Team, Video Call Support | ✘ Email Only, 1-2 Week Response Time |
| Engineering Support | ✔ Free Application Engineering & Cross-Reference | ✘ No Technical Support Provided |
🔄 Related Products & Accessories
Browse our complete range of agricultural transmission components including PTO shafts, gears, pulleys, chains, and sprockets — all engineered to integrate seamlessly with EP-RC130-146 gearboxes.
🏆 Certifications & Quality Standards
The EP-RC130-146 is produced in our ISO 9001:2015 certified facility with full material traceability from steel mill to finished product. We perform incoming material inspection (spectrometry and hardness), in-process dimensional verification at every machining stage, and final assembly testing that includes noise, vibration, and oil-leak checks. Certificates of conformance are available on request.
🏭 Why Choose Ever-power Australia Mower Gearbox Co.,Ltd.?
Choosing Ever-power Australia Mower Gearbox Co.,Ltd. means partnering with a manufacturer that understands agricultural machinery from the ground up. Our R&D team develops 15 new gearbox models each year, collaborating directly with implement OEMs in Australia, Germany, the United States, Brazil, and beyond. Whether you need a standard catalog gearbox shipped next week or a fully custom design with unique ratios and mounting interfaces, we deliver — on specification, on budget, and on time.
📞 Get Your EP-RC130-146 Quote Today
Upgrade from unreliable aftermarket gearboxes to the proven EP-RC130-146. Our team is ready to provide datasheets, cross-reference guides, and a no-obligation quotation within 24 hours.
