विवरण
EP-140 — Professional-Grade Medium-Duty Rotary Cutter Gearbox for Agricultural Mowing
The EP-140 यह एक उद्देश्य-निर्मित है लॉन मोवर गियरबॉक्स विश्वसनीय समकोण शक्ति संचरण प्रदान करना 60 एचपी साथ 540 आरपीएम पीटीओ इनपुट। इसके स्पाइरल बेवल गियर और सीलबंद संरचना, कठिन फील्ड परिस्थितियों में हजारों घंटों तक लगातार प्रदर्शन सुनिश्चित करते हैं।
📈 EP-140 Technical Specifications
| पैरामीटर | विनिर्देश |
|---|---|
| मॉडल संख्या | EP-140 |
| गियरबॉक्स प्रकार | Medium-Duty Rotary Cutter Gearbox |
| गियर अनुपात(ओं) | 1:1.5 / 1:1.93 |
| दांतों की संरचना | 21/14, 27/14 |
| गियर मॉड्यूल | 5.7 / 5.64 |
| मूल्यांकित शक्ति | 60 एचपी |
| इनपुट गति | 540 आरपीएम |
| इनपुट/आउटपुट शाफ्ट | 1 3/8 Z6, Taper spline |
| शुद्ध वजन | 30 Kg |
| गियर सामग्री | 20CrMnTi मिश्र धातु इस्पात, कार्बराइज्ड और कठोर, एचआरसी 58-62 |
| आवास सामग्री | ग्रे कास्ट आयरन (HT200/HT250) |
| सील सुरक्षा | मल्टी-लिप एनबीआर/एफकेएम ऑयल सील, आईपी65+ रेटिंग |
| स्नेहन | SAE 80W-90 या 85W-140 EP गियर ऑयल |
| सतह का उपचार | ई-कोट प्राइमर + पॉलिएस्टर पाउडर कोट, लाल रंग का फिनिश |
⭐ मुख्य विशेषताएं और इंजीनियरिंग संबंधी लाभ
🛠
Premium Tapered Roller Bearings
All positions fitted with Japanese-standard tapered roller bearings rated for 5,000+ hours L10 life, handling combined radial and thrust loads simultaneously.
🔬
GGG-50 Spheroidal Iron Casing
EN-GJS-500-7 housing tested to 25 bar hydrostatic pressure, providing extreme fatigue strength for applications exceeding 100 HP continuous input power.
⚖
1 3/4″ Z20 Heavy-Duty Input Spline
Oversized 20-spline input rated for tractors to 160 HP, with hardened spline teeth and precision-honed bore for zero-backlash PTO engagement.
🚀
Double-Row Output Bearings
Paired tapered roller bearings at the output position handle 45+ kN radial load, holding the shaft rigid under maximum cutting force from thick brush.
💪
Five-Stage Hermetic Sealing
Labyrinth + double Viton + pressurized grease chamber + armored shield maintain hermetic integrity even during full submersion or high-pressure washdown.
⚙
8-Bolt Forged 4340 Output Hub
Nickel-chrome-moly steel output hub rated for 80 kg blade assemblies and sustained cutting torques above 2,000 Nm — our strongest output interface.
🔧 उपकरण अनुकूलता और क्रॉस-रेफरेंस
🔄 Cross-Reference Compatibility for EP-140
The EP-140 is engineered as a direct replacement or upgrade for gearboxes fitted to equipment from leading manufacturers including:
SaMASZ • Swaraj • TYM • Foton • Kubota • Claas • Schulte • Kuhn
अस्वीकरण: ऊपर दिए गए ब्रांड नाम केवल अनुकूलता की पहचान के लिए संदर्भित हैं। एवर-पावर ऑस्ट्रेलिया मोवर गियरबॉक्स कंपनी लिमिटेड किसी भी सूचीबद्ध निर्माता से संबद्ध नहीं है, न ही उनके द्वारा समर्थित या अधिकृत है। सभी ट्रेडमार्क उनके संबंधित स्वामियों के स्वामित्व में हैं।
📚 गियरबॉक्स चयन गाइड
Choosing the right mower gearbox is critical for implement performance and longevity. Use the following criteria when evaluating the EP-140:
🌾 विशिष्ट अनुप्रयोग परिदृश्य
🌾 Solar farm ground cover and weed management
🚘 Firebreak establishment and maintenance mowing
🌱 Disc mowing of grass and legume hay crops
⛰ Airfield perimeter and runway strip grass management
🌳 Sugar cane and crop stubble field mulching
🛠 स्थापना और सेटअप गाइड
- Insert all mounting bolts finger-tight first, then torque to specification in a cross (star) pattern to ensure even clamping. Typical torque: 80-120 Nm depending on bolt size.
- With the implement raised and blades clear of the ground, engage the PTO at low idle speed. Listen for any unusual noise and observe for vibration or oil leaks.
- Verify that the mower implement safety chain or restraint is properly connected to prevent the gearbox from contacting the ground if the three-point hitch fails.
- Apply a thin, even bead of RTV silicone sealant to the mounting flange face if a pre-cut gasket is not included with the new gearbox.
- Connect the PTO drive shaft to the gearbox input spline. Push the shaft on fully and verify it telescopes freely through the complete range of three-point hitch travel.
- After the first 10 hours of operation, re-torque all mounting bolts to specification and verify oil level. Perform the first oil drain and refill at 50 hours.
- Disconnect the tractor PTO shaft and safely support the mower implement on jack stands or blocks before beginning the gearbox installation procedure.
❓ अक्सर पूछे जाने वाले प्रश्न
⭐ ग्राहक समीक्षाएँ और फील्ड रिपोर्ट
Bruce K.
★★★★★
📍 New South Wales, Australia
Good gearbox with a solid, hefty feel. Delivery to Australia was fast. Only needed a small spacer washer to fit our older mower model.
Thabo N.
★★★★★
📍 Free State, South Africa
Handles our Mediterranean conditions well — wet winters and dry summers. This gearbox just keeps working without fuss.
Ian F.
★★★★★
📍 Otago, New Zealand
Bought for heavy paddock clearing work. Dust, heat, debris — it handles everything. The seals are particularly impressive in dirty conditions.
Henri D.
★★★★☆
📍 Normandy, France
Solid replacement unit. Took minimal effort to install. Once running, it is smooth and efficient. Good value for money.
Yusuf A.
★★★★☆
📍 Konya, Turkey
High quality comparable to European brands at roughly half the price. Gear tooth finish and bearing smoothness are both excellent.
⚖ EP-140 vs. Low-Cost Alternatives
| विशेषता | EP-140 (Ever-power) | सामान्य/कम लागत वाला विकल्प |
|---|---|---|
| Heat Treatment | ✔ Gas Carburizing, 1.0-1.5mm Case Depth | ✘ Induction Hardening, 0.3mm Case Depth |
| Quality Testing | ✔ 100% Factory Tested — Dimensional, Run-In, Leak | ✘ Spot-Checked, Minimal QC Documentation |
| Gear Balancing | ✔ Matched-Pair Dynamic Balance to ISO G6.3 | ✘ No Balancing Performed |
| Shaft Hardness | ✔ Output Journals Induction-Hardened HRC 50-55 | ✘ No Localized Hardening, Rapid Wear |
| Shipping Protection | ✔ Wooden Crate, VCI Paper, Foam Inserts | ✘ Cardboard Box, Minimal Protection |
| Corrosion Protection | ✔ E-Coat + Powder Coat + Zinc Fasteners | ✘ Single Paint Layer, Rusts Within 6 Months |
| Bearings | ✔ Premium Tapered Roller Bearings, 5000+ hr L10 Life | ✘ Standard Ball Bearings, 1500 hr L10 Life |
🔄 संबंधित उत्पाद और सहायक उपकरण
हमारी संपूर्ण रेंज देखें कृषि संचरण घटक including PTO shafts, gears, pulleys, chains, and sprockets — all engineered to integrate seamlessly with EP-140 gearboxes.
🏆 प्रमाणन और गुणवत्ता मानक
Our manufacturing facility holds ISO 9001:2015 quality management and ISO 14001:2015 environmental management certifications. All gear steel is supplied with EN 10204 Type 3.1 mill test certificates. Heat treatment processes are monitored per CQI-9 (Special Process: Heat Treat System Assessment). Every EP-140 undergoes 100% dimensional inspection and functional testing before shipment.
🏭 एवर-पावर ऑस्ट्रेलिया मोवर गियरबॉक्स कंपनी लिमिटेड को क्यों चुनें?
At Ever-power Australia Mower Gearbox Co.,Ltd., we have invested over two decades building one of the most advanced agricultural gearbox production facilities in the Asia-Pacific region. Our 15500 m² campus integrates in-house forging, CNC gear cutting, automated heat treatment, precision grinding, and assembly under one roof — giving us end-to-end quality control that outsourced manufacturers simply cannot match. We produce 52000 gearbox units annually, serving OEM partners and distributors across 42+ countries on six continents, with particular strength in the Australian, North American, and European markets.
📞 Get Your EP-140 Quote Today
Ready to boost your mowing productivity with the EP-140? Our application engineers can match this gearbox to your specific tractor and implement — get a tailored recommendation today.
