Deskripsi Produk
Fitur:
1) Power: 5~15W, 15~25W, 25~40W, 40~60W, 60~90W, 90~120W, 120~150W, 150~200W
2) Ratio:i=3~100
|
Rated output torque |
N.M |
4.5-1800 |
|
Instant stop torque |
N.M |
Two times of rated output torque |
|
Life |
Hour |
30,000 |
|
Full load efficiency |
|
95%,98% |
|
Operating temperature |
°C |
-25—+90 |
|
AKU P |
|
IP54 |
|
Lubrication type |
|
Lifetime lubrication |
|
Mounting type |
|
Any |
|
Product type |
|
PLS70 |
PLS90 |
PLS115 |
PLS142 |
PLS190 |
|
Torsional stiffness |
N.M/arcmin |
6,7 |
9,10 |
20,22 |
44,46 |
130,140 |
|
Noise |
dB(A) |
58 |
60 |
65 |
68 |
70 |
|
Max output speed |
Min |
14000 |
10000 |
8500 |
6500 |
6000 |
|
Recommend input speed |
Min |
5000 |
4500 |
4000 |
3000 |
2500 |
Noise test standard pressure level,distance 1m,measured on idle running with an input speed of 3000rpm.
High precision planetary gearbox matched with serve motor,stepping motor are widely used.lowest backlash<3");high output torques;high efficiency(96%);honed toothings;22 ratios i=3,…,512;low noise(<65dB(A));any mounting position;easy motor mounting;life time lubrication;Figure diameters 40,60,80,120,160mm.more options.
Planetary gearbox:
ZDE:Precision planetary-round flange output
ZDF:Precision planetary-square flange output
ZDWE:Precise planetary-right angle round flange output
ZDWF:Precise planetary-right angle square flange output
ZDS:Precise planetary-high rigidity,low back lash
/* 22 Januari 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Aplikasi: | Motor |
|---|---|
| Kekerasan: | OEM |
| Instalasi: | OEM |
| Tata letak: | OEM |
| Bentuk Gigi: | OEM |
| Melangkah: | OEM |
| Kustomisasi: |
Tersedia
| Permintaan Khusus |
|---|
Adjusting Tension on a Mower Gearbox Belt
Proper tension adjustment of the gearbox belt in your mower is crucial for optimal performance and belt longevity. Follow these steps to adjust the tension:
- Preparation: Turn off the mower’s engine and disconnect the spark plug wire to ensure safety.
- Locate the Adjustment Mechanism: Identify the tension adjustment mechanism on the mower. This could be a tensioning bolt, an adjustable bracket, or another mechanism depending on the mower model.
- Loosen Bolts: If your mower has tensioning bolts, slightly loosen the mounting bolts securing the gearbox in place. This allows the gearbox to move and adjust tension.
- Adjust Tension: Use the tension adjustment mechanism to increase or decrease the tension on the belt. Refer to your mower’s manual for recommended tension specifications.
- Check Tension: After adjusting, check the tension by pressing down on the belt at a midpoint between the pulleys. The belt should give a little, but not excessively. Also, check for proper alignment of the pulleys.
- Tighten Bolts: Once the tension is set correctly, tighten the mounting bolts of the gearbox to secure it in place.
- Test Operation: Reconnect the spark plug wire and start the mower to observe the belt’s operation. Listen for any unusual noises and monitor the belt for proper engagement with the pulleys.
Regularly checking and adjusting the tension of the gearbox belt ensures efficient power transmission and prevents premature wear. If you’re unsure about the proper tension adjustment, consult your mower’s manual or seek assistance from a professional.
Troubleshooting Strange Noises from a Mower Gearbox
If you hear strange noises coming from your mower gearbox, follow these steps to troubleshoot the issue:
- Identify the Noise: Determine the type of noise, such as grinding, squealing, or knocking. Different noises can indicate various problems.
- Check Lubrication: Insufficient or contaminated lubrication can cause unusual noises. Check the gearbox’s oil level and condition and replace it if necessary.
- Inspect Gears and Bearings: Worn, damaged, or misaligned gears and bearings can generate noise. Inspect these components for wear, chipping, or misalignment.
- Tighten Fasteners: Loose bolts and fasteners can lead to vibration and noise. Check and tighten all fasteners connecting the gearbox to the mower.
- Check Belt Tension: A loose or misaligned drive belt can cause noise. Adjust the belt tension according to the manufacturer’s guidelines.
- Inspect Clutch Components: If your mower has a clutch, worn or damaged clutch components can create noise. Inspect the clutch assembly for any issues.
- Examine Blade Components: If the noise is related to blade engagement, check the blade assembly for damage, alignment, and balance.
- Clean Debris: Debris, dirt, and grass clippings can accumulate in the gearbox and cause noise. Clean the gearbox thoroughly and remove any obstructions.
- Carilah Bantuan Profesional: If you can’t identify or fix the issue, consult a professional technician or service center for diagnosis and repair.
Regular maintenance and prompt identification of unusual noises can help prevent further damage and ensure the smooth operation of your mower gearbox.
Tanda-Tanda Kerusakan pada Gearbox Mesin Pemotong Rumput
Gearbox mesin pemotong rumput yang rusak dapat menyebabkan kinerja buruk dan perbaikan yang berpotensi mahal jika tidak segera ditangani. Berikut beberapa tanda umum yang menunjukkan bahwa gearbox mesin pemotong rumput Anda mungkin mengalami masalah:
- Suara-suara Aneh: Suara berderit, berdentuman, atau melengking selama pengoperasian dapat mengindikasikan roda gigi atau bantalan yang aus atau rusak di dalam kotak roda gigi.
- Pemadaman Listrik: Jika mesin pemotong rumput Anda kesulitan memotong rumput atau bergerak maju dengan efisien, hal itu mungkin disebabkan oleh masalah pada gearbox yang memengaruhi transmisi daya.
- Kesulitan dalam Mengganti Gigi: Jika mesin pemotong rumput Anda menggunakan transmisi manual, kesulitan dalam memindahkan gigi atau gigi yang terlepas dari tempatnya dapat menjadi tanda adanya masalah pada gearbox.
- Kebocoran Minyak: Kebocoran oli yang terlihat di sekitar rumah girboks menunjukkan potensi masalah pada seal atau gasket yang perlu diperbaiki.
- Getaran Berlebihan: Getaran atau guncangan berlebihan saat mengoperasikan mesin pemotong rumput dapat mengindikasikan roda gigi yang tidak sejajar atau masalah internal lainnya di dalam kotak roda gigi.
- Pemotongan Tidak Merata: Jika mesin pemotong rumput Anda meninggalkan bercak rumput yang tidak rata, hal itu mungkin disebabkan oleh masalah pada gearbox yang memengaruhi sinkronisasi pisau.
- Keterlibatan Tertunda: Keterlambatan antara pengaktifan transmisi dan pergerakan mesin pemotong rumput dapat menandakan masalah pada mekanisme pengaktifan gearbox.
- Bau Terbakar: Bau terbakar atau panas berlebih bisa jadi akibat gesekan yang disebabkan oleh komponen gearbox yang rusak atau tidak dilumasi dengan benar.
Jika Anda melihat salah satu tanda-tanda ini, sangat penting untuk segera mengatasi masalah tersebut. Mengabaikan masalah gearbox dapat menyebabkan kerusakan lebih lanjut dan perbaikan yang lebih mahal di kemudian hari. Disarankan untuk berkonsultasi dengan profesional untuk diagnosis yang akurat dan perbaikan yang tepat.
editor by CX 2024-05-02
