제품 설명
Features:
1) Power: 5~15W, 15~25W, 25~40W, 40~60W, 60~90W, 90~120W, 120~150W, 150~200W
2) Ratio:i=3~100
|
Rated output torque |
N.M |
4.5-1800 |
|
Instant stop torque |
N.M |
Two times of rated output torque |
|
Life |
Hour |
30,000 |
|
Full load efficiency |
|
95%,98% |
|
Operating temperature |
°C |
-25—+90 |
|
IP |
|
IP54 |
|
Lubrication type |
|
Lifetime lubrication |
|
Mounting type |
|
Any |
|
Product type |
|
PLS70 |
PLS90 |
PLS115 |
PLS142 |
PLS190 |
|
Torsional stiffness |
N.M/arcmin |
6,7 |
9,10 |
20,22 |
44,46 |
130,140 |
|
Noise |
dB(A) |
58 |
60 |
65 |
68 |
70 |
|
Max output speed |
Min |
14000 |
10000 |
8500 |
6500 |
6000 |
|
Recommend input speed |
Min |
5000 |
4500 |
4000 |
3000 |
2500 |
Noise test standard pressure level,distance 1m,measured on idle running with an input speed of 3000rpm.
High precision planetary gearbox matched with serve motor,stepping motor are widely used.lowest backlash<3");high output torques;high efficiency(96%);honed toothings;22 ratios i=3,…,512;low noise(<65dB(A));any mounting position;easy motor mounting;life time lubrication;Figure diameters 40,60,80,120,160mm.more options.
Planetary gearbox:
ZDE:Precision planetary-round flange output
ZDF:Precision planetary-square flange output
ZDWE:Precise planetary-right angle round flange output
ZDWF:Precise planetary-right angle square flange output
ZDS:Precise planetary-high rigidity,low back lash
/* 2571년 1월 22일 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| 애플리케이션: | Motor |
|---|---|
| 경도: | OEM |
| 설치: | OEM |
| 공들여 나열한 것: | OEM |
| Gear Shape: | OEM |
| 단계: | OEM |
| 맞춤 설정: |
사용 가능
| 맞춤형 요청 |
|---|
Adjusting Tension on a Mower Gearbox Belt
Proper tension adjustment of the gearbox belt in your mower is crucial for optimal performance and belt longevity. Follow these steps to adjust the tension:
- Preparation: Turn off the mower’s engine and disconnect the spark plug wire to ensure safety.
- Locate the Adjustment Mechanism: Identify the tension adjustment mechanism on the mower. This could be a tensioning bolt, an adjustable bracket, or another mechanism depending on the mower model.
- Loosen Bolts: If your mower has tensioning bolts, slightly loosen the mounting bolts securing the gearbox in place. This allows the gearbox to move and adjust tension.
- Adjust Tension: Use the tension adjustment mechanism to increase or decrease the tension on the belt. Refer to your mower’s manual for recommended tension specifications.
- Check Tension: After adjusting, check the tension by pressing down on the belt at a midpoint between the pulleys. The belt should give a little, but not excessively. Also, check for proper alignment of the pulleys.
- Tighten Bolts: Once the tension is set correctly, tighten the mounting bolts of the gearbox to secure it in place.
- Test Operation: Reconnect the spark plug wire and start the mower to observe the belt’s operation. Listen for any unusual noises and monitor the belt for proper engagement with the pulleys.
Regularly checking and adjusting the tension of the gearbox belt ensures efficient power transmission and prevents premature wear. If you’re unsure about the proper tension adjustment, consult your mower’s manual or seek assistance from a professional.
Troubleshooting Strange Noises from a Mower Gearbox
If you hear strange noises coming from your mower gearbox, follow these steps to troubleshoot the issue:
- Identify the Noise: Determine the type of noise, such as grinding, squealing, or knocking. Different noises can indicate various problems.
- Check Lubrication: Insufficient or contaminated lubrication can cause unusual noises. Check the gearbox’s oil level and condition and replace it if necessary.
- Inspect Gears and Bearings: Worn, damaged, or misaligned gears and bearings can generate noise. Inspect these components for wear, chipping, or misalignment.
- Tighten Fasteners: Loose bolts and fasteners can lead to vibration and noise. Check and tighten all fasteners connecting the gearbox to the mower.
- Check Belt Tension: A loose or misaligned drive belt can cause noise. Adjust the belt tension according to the manufacturer’s guidelines.
- Inspect Clutch Components: If your mower has a clutch, worn or damaged clutch components can create noise. Inspect the clutch assembly for any issues.
- Examine Blade Components: If the noise is related to blade engagement, check the blade assembly for damage, alignment, and balance.
- Clean Debris: Debris, dirt, and grass clippings can accumulate in the gearbox and cause noise. Clean the gearbox thoroughly and remove any obstructions.
- Seek Professional Help: If you can’t identify or fix the issue, consult a professional technician or service center for diagnosis and repair.
Regular maintenance and prompt identification of unusual noises can help prevent further damage and ensure the smooth operation of your mower gearbox.
Signs of a Faulty Mower Gearbox
A faulty mower gearbox can lead to poor performance and potentially expensive repairs if not addressed promptly. Here are some common signs that indicate your mower gearbox may be experiencing issues:
- Unusual Noises: Grinding, clunking, or squealing noises during operation can indicate worn or damaged gears or bearings in the gearbox.
- Loss of Power: If your mower is struggling to cut grass or move forward efficiently, it could be due to a gearbox problem affecting power transmission.
- Difficulty in Shifting Gears: If your mower has a manual transmission, difficulty in shifting gears or gears slipping out of place can be a sign of gearbox trouble.
- Leaking Oil: Visible oil leaks around the gearbox housing suggest a potential seal or gasket issue that needs attention.
- Excessive Vibration: Excessive vibration or shaking while operating the mower may indicate misaligned gears or other internal problems within the gearbox.
- Uneven Cutting: If your mower is leaving uneven patches of grass, it could be due to an issue with the gearbox affecting blade synchronization.
- Delayed Engagement: A delay between engaging the transmission and movement of the mower can signal a problem with the gearbox’s engagement mechanism.
- Burning Smell: A burning or overheated odor could be the result of friction caused by damaged or improperly lubricated gearbox components.
If you notice any of these signs, it’s crucial to address the issue promptly. Ignoring gearbox problems can lead to further damage and more expensive repairs down the line. It’s recommended to consult a professional for an accurate diagnosis and appropriate repairs.
editor by CX 2024-05-02
