Keterangan
EP-01-790 — Engineered for Australian & Global Farming Conditions
Itu EP-01-790 from Ever-power Australia Mower Gearbox Co.,Ltd. is a field-proven right-angle gearbox built for rotary mower and brush cutter applications. Its 40 / 30 HP capacity and hardened bevel gears keep your operation running efficiently from dawn to dusk, season after season.
📈 EP-01-790 Technical Specifications
| Parameter | Spesifikasi |
|---|---|
| Nomor Model | EP-01-790 |
| Jenis Gearbox | Compact Rotary Cutter Gearbox |
| Rasio Gigi | 1:1.92 / 1:2.5 |
| Konfigurasi Gigi | 25/13, 30/12 |
| Modul Gigi | 5.25 / 3.9 |
| Daya Terukur | 40 / 30 HP |
| Kecepatan Masukan | 540 rpm |
| Poros Masukan/Keluaran | 1 3/8 Z6 / Keyway |
| Berat Bersih | 22 Kg |
| Bahan Roda Gigi | Baja Paduan 20CrMnTi, Dikarburisasi & Dikeraskan HRC 58-62 |
| Bahan Perumahan | Besi Cor Abu-abu (HT200/HT250) |
| Perlindungan Segel | Segel Oli Multi-Bibir NBR/FKM, Peringkat IP65+ |
| Pelumasan | Oli roda gigi SAE 80W-90 atau 85W-140 EP |
| Perawatan Permukaan | Primer E-Coat + Lapisan Serbuk Poliester, Warna Merah |
⭐ Fitur Utama & Keunggulan Teknik
⚖
Quadruple-Barrier Environmental Sealing
Labyrinth + twin Viton FKM seals + armored debris shield achieve IP67, protecting against total submersion and high-pressure cleaning equipment.
🚀
Forced-Splash Oil Distribution
Gear-driven splash channels route lubricant to every bearing and mesh zone even on hillside slopes up to 35°, preventing dry-running at extreme operating angles.
💪
AISI 9310 Aircraft-Grade Gears
Vacuum-carburized, cryogenically treated gears reaching HRC 62-65 surface with a ductile core — the same metallurgy used in helicopter transmission gears.
⚙
99% Peak Efficiency, AGMA Class 12
Super-finished teeth ground to ≤ 0.2 μm Ra with class-leading accuracy, transmitting power with virtually zero parasitic friction at rated speed and load.
⚗
Hypoid Gear Precision Set
High-precision hypoid gears from 20MnCr5 steel, carburized and ground to AGMA Class 9, for smooth and quiet power transfer inside disc mower hubs.
🔒
Concentric Blade-Mount Hub
Precision-machined pilot diameter and balanced bolt circle ensure vibration-free disc rotation, maintaining uniform cutting height across the full mower bar width.
🔧 Kompatibilitas dan Referensi Silang Peralatan
🔄 Cross-Reference Compatibility for EP-01-790
The EP-01-790 is engineered as a direct replacement or upgrade for gearboxes fitted to equipment from leading manufacturers including:
Fendt • Iseki • YTO • Massey Ferguson • Deutz-Fahr • Woods • Krone • McConnel
Penafian: Nama merek di atas hanya dirujuk untuk identifikasi kompatibilitas. Ever-power Australia Mower Gearbox Co.,Ltd. tidak berafiliasi dengan, didukung oleh, atau diotorisasi oleh produsen mana pun yang tercantum. Semua merek dagang milik pemiliknya masing-masing.
📚 Panduan Pemilihan Transmisi
The correct gearbox specification depends on your tractor, implement, and field conditions. Evaluate these factors for the EP-01-790:
🌾 Skenario Aplikasi Umum
🌾 Mining site vegetation rehabilitation and control
🚘 Forestry site preparation and plantation row clearing
🌱 Stubble incorporation and green manure tillage
⛰ Municipal park and recreational reserve mowing
🌳 Silage paddock management and pasture renovation
🛠 Panduan Instalasi & Pengaturan
- Connect the PTO drive shaft to the gearbox input spline. Push the shaft on fully and verify it telescopes freely through the complete range of three-point hitch travel.
- After the first 10 hours of operation, re-torque all mounting bolts to specification and verify oil level. Perform the first oil drain and refill at 50 hours.
- Disconnect the tractor PTO shaft and safely support the mower implement on jack stands or blocks before beginning the gearbox installation procedure.
- For units weighing over 25 kg, use a chain hoist, engine crane, or two-person lift to position the gearbox. Never attempt to lift heavy gearboxes solo.
- Fill the gearbox with the recommended gear oil (SAE 80W-90 or 85W-140 EP) to the level indicated on the sight glass or dipstick. Do not overfill.
- Before operating at full load, run through a graduated break-in sequence: 30 minutes at half-throttle, then 30 minutes at three-quarter throttle, before engaging full PTO speed.
- Inspect the implement mounting pad for flatness using a straightedge. Any warping exceeding 0.5 mm should be corrected before the new gearbox is installed.
❓ Pertanyaan yang Sering Diajukan
⭐ Ulasan Pelanggan & Laporan Lapangan
Steve H.
★★★★★
📍 Western Australia, Australia
High quality comparable to European brands at roughly half the price. Gear tooth finish and bearing smoothness are both excellent.
Piotr N.
★★★★★
📍 Lublin, Polandia
Third unit purchased for our growing fleet. Consistent quality every time. Their factory clearly has disciplined production processes.
Luca V.
★★★★★
📍 Toskana, Italia
Our mechanic was impressed by the machining quality when he opened the box. Everything was precisely finished and well-protected for shipping.
Rajesh P.
★★★★☆
📍 Punjab, India
The oil sight glass is a real bonus. Saves us time in the workshop and lets us spend more hours in the paddock. Great design.
Thabo N.
★★★★☆
📍 Free State, South Africa
Oil change was simple thanks to the drain and fill locations being well-positioned. Small details like this show engineering thought.
⚖ EP-01-790 vs. Low-Cost Alternatives
| Fitur | EP-01-790 (Ever-power) | Alternatif Generik / Murah |
|---|---|---|
| Oil Capacity | ✔ Generous Sump for Extended Cooling, Sight Glass | ✘ Minimal Oil Volume, No Level Indicator |
| Drain Plug | ✔ Magnetic Plug Captures Wear Particles | ✘ Standard Plug, No Particle Capture |
| Traceability | ✔ Laser-Etched Serial, Full Material Records | ✘ No Serial Number, No Traceability |
| Housing Machining | ✔ 5-Axis CNC, IT6 Bore Tolerance | ✘ 3-Axis CNC or Manual, IT9 Bore Tolerance |
| Spare Parts Availability | ✔ Full Inventory, Ships Within 24 Hours | ✘ Limited Stock, 4-8 Week Back-Order |
| Lead Time | ✔ 3-5 Days Standard, 4-6 Weeks Custom | ✘ 8-12 Weeks, No Expedite Option |
| Gear Accuracy | ✔ AGMA Class 8-10, CNC Ground Post Heat-Treatment | ✘ AGMA Class 5-6, Hobbed Only, No Grinding |
🔄 Related Products & Accessories
Browse our complete range of agricultural transmission components including PTO shafts, gears, pulleys, chains, and sprockets — all engineered to integrate seamlessly with EP-01-790 gearboxes.
🏆 Certifications & Quality Standards
Quality assurance is embedded in every step of EP-01-790 production, certified to ISO 9001:2015 standards. All forged gear blanks are ultrasonically inspected per ASTM A388 to ensure zero internal defects. Finished gears are checked on Gleason analyzers for profile, lead, pitch, and runout accuracy. Each assembled unit is run-tested at rated speed before release.
🏭 Why Choose Ever-power Australia Mower Gearbox Co.,Ltd.?
Ever-power Australia Mower Gearbox Co.,Ltd. was founded with a simple mission: give farmers worldwide access to durable, fairly priced power transmission components. Today, our vertically integrated operation — from raw steel procurement to finished-product testing — processes over 3400 tonnes of alloy steel annually. Our ISO 9001:2015-certified factory employs 225 skilled technicians and engineers, each contributing to our industry-leading 98.5% on-time delivery rate and less than 0.3% field return rate.
📞 Get Your EP-01-790 Quote Today
Whether you need a single EP-01-790 replacement or a container load for your production line, we deliver. Reach out to our sales team for volume pricing and priority lead times.
