Keterangan
Built to Last: EP-AG135 Agricultural Rotary Cutter Gearbox
Itu EP-AG135 is built for the operator who values uptime above all else. This gearbox pertanian handles 50 HP through precision-machined spiral bevel gears, supported by premium bearings and multi-stage sealing for maximum service life.
📈 EP-AG135 Technical Specifications
| Parameter | Spesifikasi |
|---|---|
| Nomor Model | EP-AG135 |
| Jenis Gearbox | Agricultural Rotary Cutter Gearbox |
| Rasio Gigi | 1:1 |
| Konfigurasi Gigi | 20/20 |
| Modul Gigi | 6.0 |
| Daya Terukur | 50 HP |
| Kecepatan Masukan | 540 rpm |
| Poros Masukan/Keluaran | 1 3/8 Z6, Cone base aequilate spline shaft |
| Berat Bersih | 16.5 Kg |
| Bahan Roda Gigi | Baja Paduan 20CrMnTi, Dikarburisasi & Dikeraskan HRC 58-62 |
| Bahan Perumahan | Besi Cor Abu-abu (HT200/HT250) |
| Perlindungan Segel | Segel Oli Multi-Bibir NBR/FKM, Peringkat IP65+ |
| Pelumasan | Oli roda gigi SAE 80W-90 atau 85W-140 EP |
| Perawatan Permukaan | Primer E-Coat + Lapisan Serbuk Poliester, Warna Merah |
⭐ Fitur Utama & Keunggulan Teknik
🔬
Multi-Position Bolt Pattern
Versatile mounting interface with tapped holes at 0°, 90°, and 180° orientations, fitting a wide range of implement frame geometries without adapter plates.
⚖
E-Coat + Powder Coat Finish
25 μm zinc-rich e-coat primer plus 80 μm polyester powder topcoat provides 1,000+ hours of ASTM B117 salt-spray corrosion resistance.
🚀
Heavy-Duty Triple-Lip Seals + Scraper
Three-lip shaft seals with external scraper rings prevent soil and moisture ingress even during tillage in waterlogged or heavily saturated ground.
💪
Dedicated Thrust Bearing Stage
Purpose-designed thrust bearings absorb the axial forces generated as tiller blades engage the soil, preventing shaft walk and premature seal extrusion.
⚙
Stainless Steel Breather Valve
Labyrinthed breather prevents pressure build-up during temperature swings while blocking water and dust ingress — a common failure point in cheaper gearboxes.
⚗
CNC-Bored Bearing Seats, IT6 Tolerance
All bearing bores finish-bored to ISO IT6 on CNC horizontal boring mills, ensuring perfect bearing fit and eliminating the fretting corrosion caused by loose seats.
🔧 Kompatibilitas dan Referensi Silang Peralatan
🔄 Cross-Reference Compatibility for EP-AG135
The EP-AG135 is engineered as a direct replacement or upgrade for gearboxes fitted to equipment from leading manufacturers including:
Fella • Sonalika • Branson • Dongfeng • John Deere • AGCO • Rhino • LS Tractor
Penafian: Nama merek di atas hanya dirujuk untuk identifikasi kompatibilitas. Ever-power Australia Mower Gearbox Co.,Ltd. tidak berafiliasi dengan, didukung oleh, atau diotorisasi oleh produsen mana pun yang tercantum. Semua merek dagang milik pemiliknya masing-masing.
📚 Panduan Pemilihan Transmisi
The EP-AG135 covers a specific performance envelope. Use these selection criteria to verify it aligns with your operational parameters:
🌾 Skenario Aplikasi Umum
🌾 Flail mulching of pruning residue in fruit plantations
🚘 Orchard and vineyard floor maintenance between rows
🌱 Mining site vegetation rehabilitation and control
⛰ Forestry site preparation and plantation row clearing
🌳 Stubble incorporation and green manure tillage
🛠 Panduan Instalasi & Pengaturan
- Jika mengganti unit yang sudah ada, tiriskan oli lama sepenuhnya, lepaskan pengencang pemasangan, dan turunkan gearbox lama dengan hati-hati. Foto orientasinya dan catat ring pengganjal yang digunakan.
- Pasang semua baut pemasangan dengan cara dikencangkan secukupnya terlebih dahulu, kemudian kencangkan sesuai spesifikasi dengan pola silang (bintang) untuk memastikan pengencangan yang merata. Torsi tipikal: 80-120 Nm tergantung pada ukuran baut.
- Dengan alat terangkat dan mata pisau tidak menyentuh tanah, aktifkan PTO pada kecepatan idle rendah. Dengarkan apakah ada suara yang tidak biasa dan amati apakah ada getaran atau kebocoran oli.
- Verify that the mower implement safety chain or restraint is properly connected to prevent the gearbox from contacting the ground if the three-point hitch fails.
- Apply a thin, even bead of RTV silicone sealant to the mounting flange face if a pre-cut gasket is not included with the new gearbox.
- Connect the PTO drive shaft to the gearbox input spline. Push the shaft on fully and verify it telescopes freely through the complete range of three-point hitch travel.
- After the first 10 hours of operation, re-torque all mounting bolts to specification and verify oil level. Perform the first oil drain and refill at 50 hours.
❓ Pertanyaan yang Sering Diajukan
⭐ Ulasan Pelanggan & Laporan Lapangan
Mark T.
★★★★★
📍 Victoria, Australia
Precision manufacturing is evident when you look at the gear teeth. Mesh noise is minimal. Very satisfied with this purchase.
Marco P.
★★★★★
📍 Emilia-Romagna, Italy
The compact size was critical for our application and this model delivered. Two years running, zero problems whatsoever.
Fernando M.
★★★★★
📍 Jalisco, Meksiko
We ordered in bulk for our dealer network. Customer return rate is near zero. That speaks volumes about reliability.
Piotr N.
★★★★☆
📍 Lublin, Polandia
Fast shipping, professional packaging, and the gearbox itself is built like a tank. Highly recommended for serious agricultural work.
Luca V.
★★★★☆
📍 Toskana, Italia
Installed on a rotary cutter that sees 8+ hours of use per day during season. Absolutely dependable. That is all I ask of a gearbox.
⚖ EP-AG135 vs. Low-Cost Alternatives
| Fitur | EP-AG135 (Ever-power) | Alternatif Generik / Murah |
|---|---|---|
| Metode Penempaan Roda Gigi | ✔ Ditempa dengan Cetakan Tertutup, Penyelarasan Aliran Butir | ✘ Ditempa atau Dicor dengan Cetakan Terbuka, Struktur Butir yang Lemah |
| Desain Pendinginan | ✔ Machined External Cooling Fins, 35% More Area | ✘ Smooth Housing, Poor Heat Dissipation |
| Output Flange | ✔ Forged Steel, Heat-Treated HRC 28-32 | ✘ Cast Iron, Untreated, Prone to Cracking |
| Bahan Roda Gigi | ✔ Baja Paduan Tempa 20CrMnTi, Karburisasi HRC 58-62 | ✘ Baja Karbon 45#, Permukaan Dikeraskan HRC 40-45 |
| Jaminan | ✔ Garansi Pabrik Penuh 12 Bulan | ✘ Garansi Terbatas 3-6 Bulan |
| Ketahanan Segel | ✔ Segel FKM/Viton, Masa Pakai 2000+ Jam | ✘ Segel NBR, Tahan 500-800 Jam Sebelum Bocor |
| Istirahat | ✔ Katup Ventilasi Stainless Steel Labyrinth | ✘ Lubang Ventilasi Terbuka Sederhana, Memungkinkan Masuknya Air |
🔄 Related Products & Accessories
Browse our complete range of agricultural transmission components including PTO shafts, gears, pulleys, chains, and sprockets — all engineered to integrate seamlessly with EP-AG135 gearboxes.
🏆 Certifications & Quality Standards
Manufactured under ISO 9001:2015 and audited annually by international OEM customers, the EP-AG135 represents our commitment to world-class quality. Gear material certificates (3.1), heat-treatment records, bearing lot traceability, and final inspection reports are maintained for every production batch and available upon customer request.
🏭 Why Choose Ever-power Australia Mower Gearbox Co.,Ltd.?
At Ever-power Australia Mower Gearbox Co.,Ltd., we are not just a gearbox factory — we are a full-service power transmission partner. From initial application engineering and 3D prototype modelling through to volume production, global logistics, and after-sales technical support, we manage the complete product lifecycle. Our 22000 m² facility in China is audited annually by international OEM customers and consistently rated among the top-tier suppliers in the agricultural transmission sector.
📞 Get Your EP-AG135 Quote Today
Need the EP-AG135 shipped fast? In-stock standard models dispatch within 3-5 business days. Contact us now to confirm availability and lock in today’s pricing before your next mowing season.
