EP-68 Degree Angle Lawn Mower Gearbox

EP-68 Degree Angle Lawn Mower Gearbox

Unlike standard 90-degree gearboxes, the EP-68 transmits power at a 68-degree shaft angle with a 1:1 ratio. Specialty implement builders and steep-terrain mowing contractors use this unique angle to position blades closer to embankments, levee walls, and ditch slopes that perpendicular drives cannot reach.

商品コード: 904769ee807e カテゴリー: タグ: , , , ,

説明


EP-68 — The Operator’s Choice in 68-Degree Angle Gearbox Technology

Trusted by professional farmers and contractors worldwide, the EP-68 芝刈り機のギアボックス combines 30馬力 capacity with robust 13.2 Kg cast construction. Available in 1:1 ratio configurations, it adapts to your mowing conditions with ease.

EP-68 68-Degree Angle Gearbox

📈 EP-68 Technical Specifications

パラメータ 仕様
型番 EP-68
ギアボックスタイプ 68度角度ギアボックス
ギア比 1:1
歯の形状 19/19
ギアモジュール 4.23
定格電力 30馬力
入力速度 540回転/分
入力/出力シャフト Optic axis / Spline
正味重量 13.2 Kg
ギア素材 20CrMnTi合金鋼、浸炭焼入れ済み、硬度HRC 58-62
ハウジング材 ねずみ鋳鉄（HT200/HT250）
シール保護 マルチリップNBR/FKMオイルシール、IP65+規格準拠
潤滑 SAE 80W-90または85W-140 EPギアオイル
表面処理 Eコートプライマー＋ポリエステル粉体塗装、赤色仕上げ

⭐ 主な特長とエンジニアリング上の利点

🛠

一体型ベアリングカートリッジ

あらかじめ荷重がかけられ、潤滑剤が塗布されたカートリッジベアリングは、現場での迅速な交換のために簡単に装着でき、ベアリングの故障による予期せぬダウンタイムを最大70%削減します。

🔬

合成PAO充填材、-40～+150℃

工場で充填されたポリアルファオレフィン系ギアオイルは、極寒の始動から高温の​​熱帯地域での連続運転まで、劣化することなく粘度安定性を維持します。

⚖

焼入れ処理済み平歯車列

HRC 56-60合金鋼製平歯車は、ロータリー耕うん機による土壌への激しい接触時に発生する高衝撃の反転荷重に対応するように設計されています。

🚀

最大トルク出力容量3倍

定格トルクの3倍の過渡トルクに耐えられる大型の出力軸を採用し、耕うん刃が地中の岩や根に当たった際の繰り返し発生する衝撃荷重を吸収します。

💪

500-Hour Extended Oil Intervals

Large sump capacity with high-grade EP oil enables 500-hour drain intervals, reducing maintenance frequency during the busiest planting and cultivation seasons.

⚙

Oil-Bath Splash Lubrication

Generous sump with directional baffles ensures all gear teeth and bearing races are oil-wetted at all times, even at the lowest recommended operating speed.

農業用芝刈り機のギアボックス

🔧 機器の互換性と相互参照

🔄 Cross-Reference Compatibility for EP-68

The EP-68 is engineered as a direct replacement or upgrade for gearboxes fitted to equipment from leading manufacturers including:

Krone • McConnel • Fendt • Iseki • YTO • Massey Ferguson • Deutz-Fahr • Woods

免責事項：上記のブランド名は、互換性確認のためのみに記載されています。Ever-power Australia Mower Gearbox Co.,Ltd.は、記載されているメーカーとは一切提携、承認、または認可を受けていません。すべての商標は、それぞれの所有者に帰属します。

📚 ギアボックス選定ガイド

Getting gearbox selection right the first time saves money and headaches. Here is a systematic approach to specifying the EP-68:

📌 Cast Iron Housing vs Aluminium Housing
The EP-68 uses a grey cast iron housing. Cast iron excels in vibration damping, impact resistance, and heat dissipation — ideal for rough, rocky mowing conditions. Aluminium is lighter and more corrosion-resistant, better suited to wet environments and weight-sensitive implements.
📌 標準カタログ vs カスタム仕様
The EP-68 is available as a standard catalog item shipping in 3-5 days. If your application requires a non-standard ratio, shaft type, or mounting configuration, our engineering team offers custom designs with 4-6 week lead times. Minimum order quantities may apply.
📌出力軸タイプの互換性
The EP-68 features Optic axis / Spline output. Verify your blade hub or implement rotor accepts this shaft type before ordering. We offer multiple output configurations — spline, taper, keyway, and flange — to match virtually any existing installation.
📌重量と取り付けに関する考慮事項
At 13.2 Kg, the EP-68 is designed for specialty mounting configurations. Confirm your implement frame and three-point hitch can support this weight plus the weight of the blade assembly. Mounting bolt pattern and orientation should match your existing layout.
📌 ギア比とブレード先端速度のマッチング
For the EP-68 with ratio(s) 1:1, calculate your required blade tip speed: typically 4,500-5,500 m/min for standard rotary cutters, 3,000-4,000 m/min for heavy brush cutting, and 5,500-6,500 m/min for fine finish mowing. Output RPM = PTO RPM ÷ ratio. Multiply by blade diameter to get tip speed.

🌾 一般的なアプリケーションシナリオ

🌾 Construction site vegetation clearing and preparation

🚘 Roadside and highway verge vegetation management

🌱 Pipeline and powerline easement clearing

⛰ Riparian zone and waterway bank vegetation control

🌳 Rotary tiller seedbed preparation for row crops

エバーパワー・オーストラリア・モアギアボックス株式会社の製造施設

🛠 インストールとセットアップガイド

  1. Disconnect the tractor PTO shaft and safely support the mower implement on jack stands or blocks before beginning the gearbox installation procedure.
  2. For units weighing over 25 kg, use a chain hoist, engine crane, or two-person lift to position the gearbox. Never attempt to lift heavy gearboxes solo.
  3. Fill the gearbox with the recommended gear oil (SAE 80W-90 or 85W-140 EP) to the level indicated on the sight glass or dipstick. Do not overfill.
  4. 全負荷運転を行う前に、段階的な慣らし運転を行ってください。まず、スロットルを半分開けて30分間運転し、次にスロットルを4分の3開けて30分間運転してから、PTOを全開速度で運転してください。
  5. 定規を使って、作業機の取り付け面が平坦かどうかを点検してください。0.5mmを超える歪みがある場合は、新しいギアボックスを取り付ける前に修正する必要があります。
  6. 運転中の振動による緩みを防ぐため、すべての取り付けボルトにNord-Lockワッシャーまたはねじロック剤を使用してください。
  7. ギアボックスを無負荷状態で5～10分間運転した後、停止させてオイルレベルを再確認してください。新しいシールやベアリングは、初期段階で少量のオイルを吸収することがよくあります。

❓よくある質問

❓ Is this suitable for mulching applications?

Yes. Our gearboxes are widely used on mulching mowers and brush cutters. For mulching, select a model rated 25-30% above your actual PTO horsepower to provide a safety margin against the intermittent shock loads typical of mulching.

❓ What quality inspections do you perform?

Every gearbox undergoes 100% dimensional inspection (CMM), gear tooth geometry verification (Gleason analyzer), hardness testing, oil-leak testing, and no-load run-in testing before shipment.

❓ What warranty do you provide?

Every gearbox ships with a 12-month warranty covering material and workmanship defects under normal operating conditions. Warranty claims are handled through our dealer network with replacement units dispatched within 48 hours of approval.

❓ How do I determine the correct model for my mower?

You need four pieces of information: (1) tractor PTO HP, (2) PTO speed (540 or 1000 RPM), (3) current gearbox mounting dimensions, and (4) output shaft type. Send us these details and we will cross-reference the best match.

❓ Is synthetic gear oil recommended?

Synthetic PAO-based 75W-90 or 80W-140 GL-5 oil is excellent, especially in extreme temperatures. Synthetics offer better cold-flow, higher film strength, and longer drain intervals. Fully compatible with all our seal materials.

⭐ お客様の声と現場レポート

★★★★★

📍 New South Wales, Australia

Replaced a failed OEM unit on a 15-year-old mower. This new gearbox is actually smoother and quieter than the original ever was.

★★★★★

📍 Hokkaido, Japan

Best aftermarket unit I have used in 20+ years of farming. Bolt holes aligned first try. Oil sight glass is a thoughtful touch.

★★★★★

📍 Castilla, Spain

Precision manufacturing is evident when you look at the gear teeth. Mesh noise is minimal. Very satisfied with this purchase.

★★★★☆

📍 Mendoza, Argentina

The compact size was critical for our application and this model delivered. Two years running, zero problems whatsoever.

★★★★☆

📍 Bavaria, Germany

We ordered in bulk for our dealer network. Customer return rate is near zero. That speaks volumes about reliability.

農業用ギアボックスシリーズ

⚖ EP-68 vs. Low-Cost Alternatives

特徴 EP-68 (Ever-power) ジェネリック／低価格代替品
Traceability ✔ Laser-Etched Serial, Full Material Records ✘ No Serial Number, No Traceability
Housing Machining ✔ 5-Axis CNC, IT6 Bore Tolerance ✘ 3-Axis CNC or Manual, IT9 Bore Tolerance
Spare Parts Availability ✔ Full Inventory, Ships Within 24 Hours ✘ Limited Stock, 4-8 Week Back-Order
Lead Time ✔ 3-5 Days Standard, 4-6 Weeks Custom ✘ 8-12 Weeks, No Expedite Option
Gear Accuracy ✔ AGMA Class 8-10, CNC Ground Post Heat-Treatment ✘ AGMA Class 5-6, Hobbed Only, No Grinding
Oil Capacity ✔ Generous Sump for Extended Cooling, Sight Glass ✘ Minimal Oil Volume, No Level Indicator
Drain Plug ✔ Magnetic Plug Captures Wear Particles ✘ Standard Plug, No Particle Capture

🔄関連商品・アクセサリー

🏆 認証と品質基準

Our production of the EP-68 follows ISO 9001:2015 requirements with additional internal standards that exceed baseline certification. Key processes include: 100% CMM dimensional verification, Vickers hardness mapping on every gear, hydrostatic housing leak test at 1.5× rated pressure, and a 15-minute no-load run-in test. Test reports accompany every shipment.

🏭 Ever-power Australia Mower Gearbox Co.,Ltd.を選ぶ理由とは？

What sets Ever-power Australia Mower Gearbox Co.,Ltd. apart is our ability to scale seamlessly from engineering support for a single unique application to mass production of 64000+ units per year without any compromise in quality. Our 9 gear production lines, climate-controlled metrology lab, and experienced technical sales team work together to make your sourcing process as efficient as your fieldwork needs to be.

PTO駆動シャフト

📞 Get Your EP-68 Quote Today

Stop losing field time to gearbox failures. The EP-68 is built to run all season without skipping a beat. Talk to our specialists about the right configuration for your operation.

見積もりを依頼する全商品を見る

関連商品