EP-40002 Lawn Mower Gearbox

EP-40002 Lawn Mower Gearbox

The EP-40002 is our flagship ultra-heavy-duty unit at 111 kg and 85 HP, featuring extreme reduction ratios up to 4.17:1. Mining rehabilitation teams and heavy-construction vegetation contractors specify this gearbox when maximum cutting torque through dense regrowth and saplings is the primary engineering requirement.

SKU: d5fd738876f7 Category: Tags: , , , ,

Beschrijving


High-Performance Ultra-Heavy-Duty Rotary Cutter Gearbox: EP-40002 by Ever-power Australia Mower Gearbox Co.,Ltd.

Engineered for sustained heavy use, the EP-40002 versnellingsbak van de maaier converts your tractor’s PTO output into efficient cutting force. Rated at 85 / 85 / 85 HP with gear ratio options of 3.2:1 / 3.77:1 / 4.17:1, this unit combines flexibility with the durability that commercial operators demand.

EP-40002 Ultra-Heavy-Duty Rotary Cutter Gearbox

📈 EP-40002 Technical Specifications

Parameter Specificatie
Modelnummer EP-40002
Versnellingsbaktype Ultra-Heavy-Duty Rotary Cutter Gearbox
Overbrengingsverhouding(en) 3.2:1 / 3.77:1 / 4.17:1
Tandconfiguratie 15/48, 13/49, 12/50
Versnellingsbakmodule 15/48, 13/49, 12/50
Nominaal vermogen 85 / 85 / 85 HP
Invoersnelheid 540 toeren per minuut
Invoer-/uitvoeras 1 3/4 Z6
Nettogewicht 111 Kg
Tandwielmateriaal 20CrMnTi gelegeerd staal, gecarburiseerd en gehard HRC 58-62
Behuizingsmateriaal Ductile Cast Iron (QT450-10)
Verzegeling Bescherming Meervoudige NBR/FKM-oliekeerringen, IP65+-geclassificeerd
Smering SAE 80W-90 of 85W-140 EP tandwielolie
Oppervlaktebehandeling E-coat primer + polyester poedercoating, rode afwerking

⭐ Belangrijkste kenmerken en technische voordelen

🚀

Through-Hardened Spur Gear Train

HRC 56-60 alloy steel spur gears designed for the high-impact reversing loads encountered during aggressive rotary tiller soil engagement.

💪

3× Peak Torque Output Capacity

Oversized output shaft rated for transient torques three times nominal, absorbing the repeated shock loads when tiller blades strike buried rocks and roots.

⚙

500-Hour Extended Oil Intervals

Large sump capacity with high-grade EP oil enables 500-hour drain intervals, reducing maintenance frequency during the busiest planting and cultivation seasons.

⚗

Oil-Bath Splash Lubrication

Generous sump with directional baffles ensures all gear teeth and bearing races are oil-wetted at all times, even at the lowest recommended operating speed.

🔒

Magnetic Drain Plug

Neodymium drain plug captures ferrous wear particles from break-in and normal operation, protecting gears and bearings from abrasive recirculation damage.

⚡

High-Capacity Oil Sump Design

30% larger oil volume compared to standard models, reducing operating temperature by 8-12 °C during sustained high-load mowing and extending lubricant life.

Versnellingsbak van een maaier voor agrarisch gebruik

🔧 Compatibiliteit en kruisverwijzing van apparatuur

🔄 Cross-Reference Compatibility for EP-40002

The EP-40002 is engineered as a direct replacement or upgrade for gearboxes fitted to equipment from leading manufacturers including:

Swaraj • TYM • Foton • Kubota • Claas • Schulte • Kuhn • SaMASZ

Disclaimer: De bovenstaande merknamen worden uitsluitend vermeld ter identificatie van de compatibiliteit. Ever-power Australia Mower Gearbox Co.,Ltd. is niet gelieerd aan, onderschreven door of geautoriseerd door een van de vermelde fabrikanten. Alle handelsmerken behoren toe aan hun respectievelijke eigenaren.

📚 Gids voor het kiezen van een versnellingsbak

Proper gearbox selection protects your investment and maximizes field productivity. Here is how to determine if the EP-40002 is right for your operation:

📌 Keuze tussen 540 tpm en 1000 tpm aftakas
The EP-40002 operates at 540 rpm. Most rotary mowers use 540 RPM PTO. The 1000 RPM standard is for larger implements on high-HP tractors. Never connect a 540 RPM gearbox to a 1000 RPM PTO — the doubled speed will destroy bearings and gears within minutes.
📌 Cast Iron Housing vs Aluminium Housing
The EP-40002 uses a ductile cast iron housing. Cast iron excels in vibration damping, impact resistance, and heat dissipation — ideal for rough, rocky mowing conditions. Aluminium is lighter and more corrosion-resistant, better suited to wet environments and weight-sensitive implements.
📌 Standard Catalog vs Custom Specification
The EP-40002 is available as a standard catalog item shipping in 3-5 days. If your application requires a non-standard ratio, shaft type, or mounting configuration, our engineering team offers custom designs with 4-6 week lead times. Minimum order quantities may apply.
📌 Compatibiliteit van het type uitgaande as
The EP-40002 features 1 3/4 Z6 output. Verify your blade hub or implement rotor accepts this shaft type before ordering. We offer multiple output configurations — spline, taper, keyway, and flange — to match virtually any existing installation.
📌 Gewicht en montageoverwegingen
At 111 Kg, the EP-40002 is designed for industrial-grade vegetation management equipment. Confirm your implement frame and three-point hitch can support this weight plus the weight of the blade assembly. Mounting bolt pattern and orientation should match your existing layout.

🌾 Typische toepassingsscenario's

🌾 Rotary tiller seedbed preparation for row crops

🚘 Land clearing of light to medium regrowth scrub

🌱 Hay field pre-cut conditioning and topping

⛰ Seed crop header trail and paddock boundary mowing

🌳 Rotary cutting of improved pasture on dairy and beef farms

Ever-power Australia Mower Gearbox Co.,Ltd. productiefaciliteit

🛠 Installatie- en configuratiehandleiding

  1. Apply a thin, even bead of RTV silicone sealant to the mounting flange face if a pre-cut gasket is not included with the new gearbox.
  2. Connect the PTO drive shaft to the gearbox input spline. Push the shaft on fully and verify it telescopes freely through the complete range of three-point hitch travel.
  3. After the first 10 hours of operation, re-torque all mounting bolts to specification and verify oil level. Perform the first oil drain and refill at 50 hours.
  4. Disconnect the tractor PTO shaft and safely support the mower implement on jack stands or blocks before beginning the gearbox installation procedure.
  5. Voor units die meer dan 25 kg wegen, gebruik een kettingtakel, motortakel of een hijsinstallatie met twee personen om de versnellingsbak te positioneren. Probeer nooit zware versnellingsbakken in je eentje te tillen.
  6. Vul de versnellingsbak bij met de aanbevolen versnellingsbakolie (SAE 80W-90 of 85W-140 EP) tot het niveau dat is aangegeven op het kijkglas of de peilstok. Niet te veel bijvullen.
  7. Voordat u op vol vermogen gaat werken, doorloop een geleidelijke inloopperiode: 30 minuten op half gas, vervolgens 30 minuten op driekwart gas, voordat u het volledige aftakastoerental inschakelt.

❓ Veelgestelde vragen

❓ Can I replace just the gear set?

Yes. Replacement gear sets are available for all models and are cost-effective when the housing, bearings, and shafts remain in good condition. We recommend replacing bearings and seals simultaneously for best results.

❓ Can this gearbox handle reverse PTO rotation?

Our spiral bevel designs operate correctly in both rotational directions without modification. However, check your specific implement requirements, as some mower blade assemblies are direction-sensitive.

❓ Welke onderhoudscontroles moet ik regelmatig uitvoeren?

Vóór elk gebruik: controleer het oliepeil en inspecteer op lekkages. Elke 50 uur: smeer de externe fittingen indien aanwezig. Elke 200 uur: ververs de olie en inspecteer de afdichtingen en lagers. Jaarlijks: open de behuizing en inspecteer de tandwieloppervlakken visueel op putjes of slijtage.

❓ Kan ik losse reserveonderdelen kopen?

Ja. We hebben complete voorraden reserveonderdelen – tandwielsets, lagers, afdichtingen, assen en bevestigingsmaterialen – voor elk model dat we produceren. Onderdelen worden wereldwijd verzonden en de meeste artikelen die op voorraad zijn, worden binnen 24 uur na bestelling verzonden.

❓ Levert u maattekeningen?

Voor elk model zijn complete technische tekeningen beschikbaar, inclusief montagegaten, asspecificaties en afmetingen. U kunt deze downloaden via onze productpagina's of kosteloos aanvragen bij onze technische afdeling.

⭐ Klantenrecensies en praktijkverslagen

★★★★★

📍 Tasmania, Australia

Installed on a mulching mower that sees 8+ hours of use per day during season. Absolutely dependable. That is all I ask of a gearbox.

★★★★★

📍 Alentejo, Portugal

We maintain 40+ mowers for council contracts. Switching to this brand has reduced our gearbox failure rate by over 60 percent.

★★★★★

📍 Canterbury, New Zealand

Running in extreme cold (-25 °C) winters and hot summers. Synthetic oil in this gearbox handles both extremes without issue.

★★★★☆

📍 Krasnodar, Russia

We hebben drie originele versnellingsbakken in ons wagenpark vervangen door dit model. De kwaliteit van de tandwielen en de afdichtingen zijn merkbaar beter. We bestellen er alvast een voor volgend seizoen.

★★★★☆

📍 Emilia-Romagna, Italy

Third year of heavy use on our hay field cutting. Still going strong with just regular oil changes. The best aftermarket gearbox I have found.

Assortiment landbouwversnellingsbakken

⚖ EP-40002 vs. Low-Cost Alternatives

Functie EP-40002 (Ever-power) Generiek / Goedkoop alternatief
Shaft Hardness ✔ Output Journals Induction-Hardened HRC 50-55 ✘ No Localized Hardening, Rapid Wear
Shipping Protection ✔ Wooden Crate, VCI Paper, Foam Inserts ✘ Cardboard Box, Minimal Protection
Corrosion Protection ✔ E-Coat + Powder Coat + Zinc Fasteners ✘ Single Paint Layer, Rusts Within 6 Months
Bearings ✔ Premium Tapered Roller Bearings, 5000+ hr L10 Life ✘ Standard Ball Bearings, 1500 hr L10 Life
Heat Treatment ✔ Gas Carburizing, 1.0-1.5mm Case Depth ✘ Induction Hardening, 0.3mm Case Depth
Quality Testing ✔ 100% Factory Tested — Dimensional, Run-In, Leak ✘ Spot-Checked, Minimal QC Documentation
Gear Balancing ✔ Matched-Pair Dynamic Balance to ISO G6.3 ✘ No Balancing Performed

🔄 Gerelateerde producten en accessoires

🏆 Certificeringen en kwaliteitsnormen

We maintain rigorous quality standards backed by ISO 9001:2015 certification across our entire production process. Raw materials are verified through spectroscopic analysis with ASTM E415 certificates. Gear tooth geometry on every EP-40002 is validated using CNC gear inspection machines calibrated to national metrology standards. Our laboratory performs hardness testing, metallographic examination, and magnetic particle inspection on every batch.

🏭 Waarom kiezen voor Ever-power Australia Mower Gearbox Co.,Ltd.?

We at Ever-power Australia Mower Gearbox Co.,Ltd. combine deep metallurgical expertise with state-of-the-art manufacturing technology to produce agricultural gearboxes that compete head-to-head with the best European and American brands — at a fraction of the cost. Our 24 CNC machining centres and 12 dedicated gear production lines give us the capacity and flexibility to handle orders from single prototype units to full container-load production runs, all with the same unwavering commitment to dimensional accuracy and material quality.

PTO-aandrijfas

📞 Get Your EP-40002 Quote Today

Looking for a dependable ultra-heavy-duty rotary cutter gearbox that pays for itself season after season? Contact us now for a competitive quote on the EP-40002 and discover why thousands of farmers trust our gearboxes.

Vraag een offerte aanBekijk alle producten

Related products