EP-RC30-193 Lawn Mower Gearbox

EP-RC30-193 Lawn Mower Gearbox

Delivering a fixed 1:1.93 gear ratio at 30 HP, the EP-RC30-193 is built specifically for operators who need maximum output torque from compact tractors. Smallholders and orchard managers value its optic-axis output and lightweight 24.5 kg body for tight-space installation on narrow mower frames.

SKU: a104b0252d50 Kategori: Tag: , , , ,

Keterangan


EP-RC30-193 — Engineered for Australian & Global Farming Conditions

Itu EP-RC30-193 from Ever-power Australia Mower Gearbox Co.,Ltd. is a field-proven right-angle gearbox built for rotary mower and brush cutter applications. Its 30 HP capacity and hardened bevel gears keep your operation running efficiently from dawn to dusk, season after season.

EP-RC30-193 Rotary Cutter Gearbox

📈 EP-RC30-193 Technical Specifications

Parameter Spesifikasi
Nomor Model EP-RC30-193
Jenis Gearbox Gearbox Pemotong Putar
Rasio Gigi 1:1.93
Konfigurasi Gigi 15/29
Modul Gigi 4.0
Daya Terukur 30 HP
Kecepatan Masukan 540 rpm
Poros Masukan/Keluaran 1 3/8 Z6, ø31.75 Optic axis
Berat Bersih 24.5 Kg
Bahan Roda Gigi Baja Paduan 20CrMnTi, Dikarburisasi & Dikeraskan HRC 58-62
Bahan Perumahan Besi Cor Abu-abu (HT200/HT250)
Perlindungan Segel Segel Oli Multi-Bibir NBR/FKM, Peringkat IP65+
Pelumasan Oli roda gigi SAE 80W-90 atau 85W-140 EP
Perawatan Permukaan Primer E-Coat + Lapisan Serbuk Poliester, Warna Merah

⭐ Fitur Utama & Keunggulan Teknik

🔒

Standard 1 3/8″ 6-Spline PTO Input

Industry-standard input spline accepts all 540 RPM PTO shafts, ensuring bolt-on compatibility with tractors from 15 HP sub-compacts to 50 HP utility models.

⚡

Induction-Hardened Output Shaft

Output shaft journals hardened to HRC 50-55 via controlled induction heating, extending bearing seat life beyond 3,000 operating hours before re-machining is needed.

🔄

Triple-Stage Shaft Sealing

Inner labyrinth + double-lip FKM seal + external V-ring slinger form a three-barrier defense against water, mud, and fine dust penetrating to the bearing cavities.

🔨

Integrated External Cooling Fins

35% additional surface area from machined cooling ribs accelerates heat rejection, keeping oil temperature below 80 °C during sustained full-load summer mowing.

🌡

18CrNiMo7-6 Aerospace Gear Steel

Vacuum-carburized gears from aircraft-grade alloy achieve HRC 60-63 surface and a tough pearlitic core, meeting AGMA Class 10 tooth accuracy standards.

🛠

98%+ Power Delivery Efficiency

Mirror-polished flanks (Ra ≤ 0.4 μm) and AGMA Class 11 accuracy virtually eliminate parasitic losses, ensuring every horsepower reaches the cutting blade.

Mower gearbox in agricultural use

🔧 Kompatibilitas dan Referensi Silang Peralatan

🔄 Cross-Reference Compatibility for EP-RC30-193

The EP-RC30-193 is engineered as a direct replacement or upgrade for gearboxes fitted to equipment from leading manufacturers including:

Claas • Schulte • Kuhn • SaMASZ • Swaraj • TYM • Foton • Kubota

Penafian: Nama merek di atas hanya dirujuk untuk identifikasi kompatibilitas. Ever-power Australia Mower Gearbox Co.,Ltd. tidak berafiliasi dengan, didukung oleh, atau diotorisasi oleh produsen mana pun yang tercantum. Semua merek dagang milik pemiliknya masing-masing.

📚 Panduan Pemilihan Transmisi

The correct gearbox specification depends on your tractor, implement, and field conditions. Evaluate these factors for the EP-RC30-193:

📌 Katalog Standar vs Spesifikasi Khusus
The EP-RC30-193 is available as a standard catalog item shipping in 3-5 days. If your application requires a non-standard ratio, shaft type, or mounting configuration, our engineering team offers custom designs with 4-6 week lead times. Minimum order quantities may apply.
📌 Output Shaft Type Compatibility
The EP-RC30-193 features 1 3/8 Z6, ø31.75 Optic axis output. Verify your blade hub or implement rotor accepts this shaft type before ordering. We offer multiple output configurations — spline, taper, keyway, and flange — to match virtually any existing installation.
📌 Weight and Mounting Considerations
At 24.5 Kg, the EP-RC30-193 is designed for compact and sub-compact tractor implements. Confirm your implement frame and three-point hitch can support this weight plus the weight of the blade assembly. Mounting bolt pattern and orientation should match your existing layout.
📌 Menyesuaikan Rasio Gigi dengan Kecepatan Ujung Pisau
For the EP-RC30-193 with ratio(s) 1:1.93, calculate your required blade tip speed: typically 4,500-5,500 m/min for standard rotary cutters, 3,000-4,000 m/min for heavy brush cutting, and 5,500-6,500 m/min for fine finish mowing. Output RPM = PTO RPM ÷ ratio. Multiply by blade diameter to get tip speed.
📌 Penentuan Ukuran Daya yang Sesuai dengan Daya PTO Traktor
The EP-RC30-193 is rated at 30 HP. Always select a gearbox rated at or above your tractor’s maximum PTO horsepower. For shock-load applications (mulching, brush clearing), add a 25-30% safety margin: a 60 HP tractor should use a 75+ HP rated gearbox.

🌾 Skenario Aplikasi Umum

🌾 Orchard and vineyard floor maintenance between rows

🚘 Mining site vegetation rehabilitation and control

🌱 Forestry site preparation and plantation row clearing

⛰ Stubble incorporation and green manure tillage

🌳 Municipal park and recreational reserve mowing

Ever-power Australia Mower Gearbox Co.,Ltd. manufacturing facility

🛠 Panduan Instalasi & Pengaturan

  1. Jika mengganti unit yang sudah ada, tiriskan oli lama sepenuhnya, lepaskan pengencang pemasangan, dan turunkan gearbox lama dengan hati-hati. Foto orientasinya dan catat ring pengganjal yang digunakan.
  2. Pasang semua baut pemasangan dengan cara dikencangkan secukupnya terlebih dahulu, kemudian kencangkan sesuai spesifikasi dengan pola silang (bintang) untuk memastikan pengencangan yang merata. Torsi tipikal: 80-120 Nm tergantung pada ukuran baut.
  3. Dengan alat terangkat dan mata pisau tidak menyentuh tanah, aktifkan PTO pada kecepatan idle rendah. Dengarkan apakah ada suara yang tidak biasa dan amati apakah ada getaran atau kebocoran oli.
  4. Verify that the mower implement safety chain or restraint is properly connected to prevent the gearbox from contacting the ground if the three-point hitch fails.
  5. Apply a thin, even bead of RTV silicone sealant to the mounting flange face if a pre-cut gasket is not included with the new gearbox.
  6. Connect the PTO drive shaft to the gearbox input spline. Push the shaft on fully and verify it telescopes freely through the complete range of three-point hitch travel.
  7. After the first 10 hours of operation, re-torque all mounting bolts to specification and verify oil level. Perform the first oil drain and refill at 50 hours.

❓ Pertanyaan yang Sering Diajukan

❓ What is the recommended oil change schedule?

Drain and replace oil after the first 50 hours of break-in. After that, change oil every 200-300 hours or at least once per season. Always drain warm oil for complete evacuation and inspect the magnetic drain plug for metallic debris.

❓ Do you manufacture custom ratios and shaft types?

Absolutely. We offer custom gear ratios, shaft profiles, and mounting configurations. Minimum order quantities apply for fully custom designs. Lead time is typically 4-6 weeks from order confirmation.

❓ What PTO shaft should I pair with this gearbox?

Use a standard agricultural PTO shaft rated for your tractor HP output with the matching spline profile. We strongly recommend shafts with shear bolt or friction clutch protection to prevent gearbox damage from sudden overloads.

❓ How does your pricing compare to genuine OEM parts?

Our gearboxes use equivalent or superior materials at typically 30-50% less than OEM pricing. Independent testing confirms comparable or better performance and service life. The savings are significant for fleet operators.

❓ Spesifikasi oli transmisi apa yang dibutuhkan gearbox ini?

Gunakan oli gir tekanan ekstrem SAE 80W-90 atau SAE 85W-140 GL-5 dalam kondisi normal. Untuk iklim di bawah nol derajat Celcius, di bawah -20 °C, oli sintetis 75W-90 memastikan aliran yang tepat saat start dingin. Selalu periksa kaca pengintai atau tongkat pengukur oli sebelum setiap perpindahan gigi.

⭐ Ulasan Pelanggan & Laporan Lapangan

★★★★★

📍 Victoria, Australia

Ini adalah unit aftermarket terbaik yang pernah saya gunakan selama lebih dari 20 tahun bertani. Lubang baut sejajar pada percobaan pertama. Kaca pengintai oli adalah sentuhan yang sangat bermanfaat.

★★★★★

📍 Canterbury, New Zealand

Precision manufacturing is evident when you look at the gear teeth. Mesh noise is minimal. Very satisfied with this purchase.

★★★★★

📍 Krasnodar, Russia

The compact size was critical for our application and this model delivered. Two years running, zero problems whatsoever.

★★★★☆

📍 Emilia-Romagna, Italy

We ordered in bulk for our dealer network. Customer return rate is near zero. That speaks volumes about reliability.

★★★★☆

📍 Jalisco, Meksiko

Fast shipping, professional packaging, and the gearbox itself is built like a tank. Highly recommended for serious agricultural work.

Rentang gearbox pertanian

⚖ EP-RC30-193 vs. Low-Cost Alternatives

Fitur EP-RC30-193 (Ever-power) Alternatif Generik / Murah
Bearings ✔ Premium Tapered Roller Bearings, 5000+ hr L10 Life ✘ Standard Ball Bearings, 1500 hr L10 Life
Heat Treatment ✔ Gas Carburizing, 1.0-1.5mm Case Depth ✘ Induction Hardening, 0.3mm Case Depth
Quality Testing ✔ 100% Factory Tested — Dimensional, Run-In, Leak ✘ Spot-Checked, Minimal QC Documentation
Gear Balancing ✔ Matched-Pair Dynamic Balance to ISO G6.3 ✘ No Balancing Performed
Shaft Hardness ✔ Output Journals Induction-Hardened HRC 50-55 ✘ No Localized Hardening, Rapid Wear
Shipping Protection ✔ Wooden Crate, VCI Paper, Foam Inserts ✘ Cardboard Box, Minimal Protection
Corrosion Protection ✔ E-Coat + Powder Coat + Zinc Fasteners ✘ Single Paint Layer, Rusts Within 6 Months

🔄 Related Products & Accessories

🏆 Certifications & Quality Standards

Quality assurance is embedded in every step of EP-RC30-193 production, certified to ISO 9001:2015 standards. All forged gear blanks are ultrasonically inspected per ASTM A388 to ensure zero internal defects. Finished gears are checked on Gleason analyzers for profile, lead, pitch, and runout accuracy. Each assembled unit is run-tested at rated speed before release.

🏭 Why Choose Ever-power Australia Mower Gearbox Co.,Ltd.?

Ever-power Australia Mower Gearbox Co.,Ltd. was founded with a simple mission: give farmers worldwide access to durable, fairly priced power transmission components. Today, our vertically integrated operation — from raw steel procurement to finished-product testing — processes over 2700 tonnes of alloy steel annually. Our ISO 9001:2015-certified factory employs 190 skilled technicians and engineers, each contributing to our industry-leading 98.5% on-time delivery rate and less than 0.3% field return rate.

PTO drive shaft

📞 Get Your EP-RC30-193 Quote Today

Whether you need a single EP-RC30-193 replacement or a container load for your production line, we deliver. Reach out to our sales team for volume pricing and priority lead times.

Request a QuoteBrowse All Products

Produk Terkait