Deskripsi Produk
Deskripsi Produk
ATA Series Shaft mounted Gearbox Reducer SMR Series Shaft mounted Gearbox Reducer
ATA series shaft mounted gearbox(speed reducer) with helical hardened gears has the characteristics of high carrying capacity, smooth transmission, light weight, low energy consumption and so on. Input shaft of ATA speed reducer is connected with gear motor by belt pulley, hollow output shaft is linked with a key. It can be replaced by electric drum as power for belt conveyors and lifting equipments. ATA series shaft mounted gearbox could be attached with back-stop to avoid the working machine back skating, and conveniently mounted by tie rod. ATA series shaft mounted speed reducer is widely applied in the mining equipments, concrete mixing batching plant, stone crushers, sand making production line and other belt conveyors, mechanical transmission areas.
Mechanical belt conveyors drive system is composed of ATA shaft mounted speed reducer, torque arm, pulleys and gear motors, whose power transmission from the gear motor to the gearbox through the pulley, and then speed reducer passed to the drive pulley through the hollow output shaft and the gearbox is fixed by torque arm, anti-slip device can be configured. The system is convenient to install,use and maintain.
Features
Mounting Type: Tie rod Hanging shaft mounted
Poros Keluaran: Single key hollow shaft, each model can select 3 hollow diameter at most.
Gearbox Housing: Hard Iron Steel, can be used outside.
Anti-slip device: Can suit for any model, It’s very convenient to be mounted.
Aplikasi
Stone crushers plant , Cement plant, Concrete batch mixing plant, Mining conveyors, Port transfer
conveyor, Crushing machine, etc ···
Characteristic
1) All gears are heat treated and fixed to achieve low noise and high output
2) Mounting dimensions are interchangeable with Fenner
Product Parameters
| TA Shaft Mounted Reducer | Output Shaft Bore [mm] | Ratio(i) | Rated torque | |
| TA30 | Φ30 | 7, 10, 12.5 | 180N.m | |
| TA35 | Φ35 | 5,10,15,20,25 | 420N.m | |
| TA40 | Φ40 | 5,10,12.5,15,20,25 | 900N.m | |
| Φ45 | ||||
| TA45 | Φ45 | 5,10,12.5,15,20,25 | 1400N.m | |
| Φ50 | ||||
| Φ55 | ||||
| TA50 | Φ50 | 5,10,12.5,15,20,25 | 2300N.m | |
| Φ55 | ||||
| Φ60 | ||||
| TA60 | Φ60 | 5,10,12.5,15,20,25 | 3600N.m | |
| Φ70 | ||||
| TA70 | Φ70 | 5,10,12.5,15,20,25,31 | 5100N.m | |
| Φ85 | ||||
| TA80 | Φ80 | 5,10,12.5,15,20,25,31 | 7000N.m | |
| Φ100 | ||||
| TA100 | Φ100 | 5,10,12.5,15,20,25,31 | 11000N.m | |
| SMR Model No. |
Output Shaft Bore [mm] |
Ratio(i) | ||
| Standar | Alternative | 5:1 13:1 20:1 |
||
| B | Φ30 | Φ40 | ||
| C | Φ40 | Φ50 | ||
| D | Φ50 | Φ55 | ||
| E | Φ55 | Φ65 | ||
| F | Φ65 | Φ75 | ||
| G | Φ75 | Φ85 | ||
| H | Φ85 | Φ100 | ||
| J | Φ100 | Φ120 | ||
Production Process
| Aplikasi: | Industry |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | 90 Degree |
| Kustomisasi: |
Tersedia
| Permintaan Khusus |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Adjusting Tension on a Mower Gearbox Belt
Proper tension adjustment of the gearbox belt in your mower is crucial for optimal performance and belt longevity. Follow these steps to adjust the tension:
- Preparation: Turn off the mower’s engine and disconnect the spark plug wire to ensure safety.
- Locate the Adjustment Mechanism: Identify the tension adjustment mechanism on the mower. This could be a tensioning bolt, an adjustable bracket, or another mechanism depending on the mower model.
- Loosen Bolts: If your mower has tensioning bolts, slightly loosen the mounting bolts securing the gearbox in place. This allows the gearbox to move and adjust tension.
- Adjust Tension: Use the tension adjustment mechanism to increase or decrease the tension on the belt. Refer to your mower’s manual for recommended tension specifications.
- Check Tension: After adjusting, check the tension by pressing down on the belt at a midpoint between the pulleys. The belt should give a little, but not excessively. Also, check for proper alignment of the pulleys.
- Tighten Bolts: Once the tension is set correctly, tighten the mounting bolts of the gearbox to secure it in place.
- Test Operation: Reconnect the spark plug wire and start the mower to observe the belt’s operation. Listen for any unusual noises and monitor the belt for proper engagement with the pulleys.
Regularly checking and adjusting the tension of the gearbox belt ensures efficient power transmission and prevents premature wear. If you’re unsure about the proper tension adjustment, consult your mower’s manual or seek assistance from a professional.
Using Synthetic Oil in Your Mower Gearbox
Yes, you can use synthetic oil in your mower gearbox, and in many cases, it’s recommended for its benefits. Synthetic oils offer several advantages over conventional oils:
- Improved Lubrication: Synthetic oils provide better lubrication, reducing friction and wear on gearbox components.
- Temperature Stability: Synthetic oils perform well in a wide range of temperatures, ensuring consistent lubrication in both hot and cold conditions.
- Resistance to Breakdown: Synthetic oils have a higher resistance to thermal breakdown, which helps them maintain their properties and effectiveness over time.
- Extended Oil Change Intervals: Synthetic oils often last longer than conventional oils, allowing for extended oil change intervals.
- Reduced Deposits: Synthetic oils tend to produce fewer deposits and sludge in the gearbox, keeping it cleaner.
Before switching to synthetic oil, it’s important to:
- Check the manufacturer’s recommendations: Confirm whether your mower’s gearbox is compatible with synthetic oil.
- Choose the right viscosity: Select a synthetic oil with the appropriate viscosity rating for your mower’s gearbox.
- Ensure proper mixing: If you’re switching from conventional to synthetic oil, it’s a good practice to thoroughly drain the old oil before adding the synthetic oil.
Using synthetic oil can contribute to the overall performance and longevity of your mower gearbox. However, always refer to your mower’s manual and the oil manufacturer’s recommendations for the best results.
Komponen Utama Kotak Gigi Mesin Pemotong Rumput
Kotak roda gigi mesin pemotong rumput adalah rakitan mekanis kompleks yang terdiri dari berbagai komponen yang bekerja bersama untuk mentransmisikan daya dan mengontrol bilah pemotong. Komponen utama dari kotak roda gigi mesin pemotong rumput meliputi:
- Poros Masukan: Poros input terhubung ke mesin pemotong rumput melalui poros penggerak. Poros ini menerima daya putar dari mesin dan mentransfernya ke gearbox.
- Gigi roda: Roda gigi merupakan komponen penting yang bertanggung jawab untuk mentransmisikan dan mengubah torsi dan kecepatan. Kotak roda gigi mesin pemotong rumput berisi seperangkat roda gigi, termasuk roda gigi masukan, roda gigi perantara, dan roda gigi keluaran, yang saling terkait untuk mencapai rasio torsi dan kecepatan yang diinginkan.
- Poros Keluaran: Poros keluaran terhubung ke mata pisau pemotong. Poros ini menerima torsi dari gearbox dan mentransfernya ke mata pisau, menyebabkan mata pisau berputar dan melakukan aksi pemotongan.
- Bantalan: Bantalan menopang poros dan roda gigi yang berputar di dalam kotak roda gigi, mengurangi gesekan dan memastikan pergerakan yang lancar. Bantalan bola atau bantalan rol umumnya digunakan untuk meningkatkan efisiensi dan umur pakai kotak roda gigi.
- Sistem Pelumasan: Kotak roda gigi mesin pemotong rumput memerlukan pelumasan yang tepat untuk meminimalkan gesekan dan keausan antara bagian-bagian yang bergerak. Pelumasan memastikan bahwa roda gigi dan bantalan beroperasi dengan lancar dan efisien.
- Perumahan: Rumah girboks membungkus dan melindungi komponen internal dari unsur-unsur eksternal. Selain itu, rumah girboks juga menampung oli pelumas dan mencegah kotoran serta serpihan masuk ke dalam girboks.
- Segel: Seal mencegah masuknya kontaminan seperti air, debu, dan kotoran ke dalam gearbox. Seal memainkan peran penting dalam menjaga integritas sistem pelumasan dan melindungi komponen internal.
- Kopling dan Rem: Beberapa kotak roda gigi mesin pemotong rumput dilengkapi dengan kopling dan rem yang memungkinkan pengaktifan dan penonaktifan mata pisau pemotong. Komponen-komponen ini memberikan kendali atas aksi pemotongan dan memungkinkan pengoperasian yang aman.
- Mekanisme Penyesuaian: Tergantung pada jenis mesin pemotong rumputnya, kotak roda gigi mungkin mencakup mekanisme penyesuaian untuk mengatur ketinggian pemotongan atau sudut mata pisau. Mekanisme ini meningkatkan keserbagunaan dan kinerja mesin pemotong rumput.
Kombinasi komponen-komponen ini di dalam gearbox mesin pemotong rumput memastikan transmisi daya yang efektif dan kontrol yang tepat atas mata pisau pemotong, sehingga menghasilkan operasi pemotongan rumput yang efisien dan akurat.
editor by CX 2023-12-12
