Penerangan Produk
Penerangan Produk
ATA Series Shaft mounted Gearbox Reducer SMR Series Shaft mounted Gearbox Reducer
ATA series shaft mounted gearbox(speed reducer) with helical hardened gears has the characteristics of high carrying capacity, smooth transmission, light weight, low energy consumption and so on. Input shaft of ATA speed reducer is connected with gear motor by belt pulley, hollow output shaft is linked with a key. It can be replaced by electric drum as power for belt conveyors and lifting equipments. ATA series shaft mounted gearbox could be attached with back-stop to avoid the working machine back skating, and conveniently mounted by tie rod. ATA series shaft mounted speed reducer is widely applied in the mining equipments, concrete mixing batching plant, stone crushers, sand making production line and other belt conveyors, mechanical transmission areas.
Mechanical belt conveyors drive system is composed of ATA shaft mounted speed reducer, torque arm, pulleys and gear motors, whose power transmission from the gear motor to the gearbox through the pulley, and then speed reducer passed to the drive pulley through the hollow output shaft and the gearbox is fixed by torque arm, anti-slip device can be configured. The system is convenient to install,use and maintain.
Features
Mounting Type: Tie rod Hanging shaft mounted
Output Shaft: Single key hollow shaft, each model can select 3 hollow diameter at most.
Gearbox Housing: Hard Iron Steel, can be used outside.
Anti-slip device: Can suit for any model, It’s very convenient to be mounted.
Application
Stone crushers plant , Cement plant, Concrete batch mixing plant, Mining conveyors, Port transfer
conveyor, Crushing machine, etc ···
Characteristic
1) All gears are heat treated and fixed to achieve low noise and high output
2) Mounting dimensions are interchangeable with Fenner
Product Parameters
| TA Shaft Mounted Reducer | Output Shaft Bore [mm] | Ratio(i) | Rated torque | |
| TA30 | Φ30 | 7, 10, 12.5 | 180N.m | |
| TA35 | Φ35 | 5,10,15,20,25 | 420N.m | |
| TA40 | Φ40 | 5,10,12.5,15,20,25 | 900N.m | |
| Φ45 | ||||
| TA45 | Φ45 | 5,10,12.5,15,20,25 | 1400N.m | |
| Φ50 | ||||
| Φ55 | ||||
| TA50 | Φ50 | 5,10,12.5,15,20,25 | 2300N.m | |
| Φ55 | ||||
| Φ60 | ||||
| TA60 | Φ60 | 5,10,12.5,15,20,25 | 3600N.m | |
| Φ70 | ||||
| TA70 | Φ70 | 5,10,12.5,15,20,25,31 | 5100N.m | |
| Φ85 | ||||
| TA80 | Φ80 | 5,10,12.5,15,20,25,31 | 7000N.m | |
| Φ100 | ||||
| TA100 | Φ100 | 5,10,12.5,15,20,25,31 | 11000N.m | |
| SMR Model No. |
Output Shaft Bore [mm] |
Ratio(i) | ||
| Standard | Alternative | 5:1 13:1 20:1 |
||
| B | Φ30 | Φ40 | ||
| C | Φ40 | Φ50 | ||
| D | Φ50 | Φ55 | ||
| E | Φ55 | Φ65 | ||
| F | Φ65 | Φ75 | ||
| G | Φ75 | Φ85 | ||
| H | Φ85 | Φ100 | ||
| J | Φ100 | Φ120 | ||
Production Process
| Permohonan: | Industry |
|---|---|
| Kekerasan: | Permukaan Gigi yang Mengeras |
| Pemasangan: | 90 Degree |
| Penyesuaian: |
Tersedia
| Permintaan Tersuai |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Melaraskan Ketegangan pada Tali Sawat Kotak Gear Pemotong Rumput
Pelarasan ketegangan tali sawat kotak gear yang betul dalam mesin pemotong rumput anda adalah penting untuk prestasi optimum dan ketahanan tali sawat. Ikuti langkah-langkah ini untuk melaraskan ketegangan:
- Persediaan: Matikan enjin mesin pemotong rumput dan cabut wayar palam pencucuh untuk memastikan keselamatan.
- Cari Mekanisme Pelarasan: Kenal pasti mekanisme pelarasan tegangan pada mesin pemotong rumput. Ini mungkin bolt penegang, pendakap boleh laras atau mekanisme lain bergantung pada model mesin pemotong rumput.
- Longgarkan Bolt: Jika mesin pemotong rumput anda mempunyai bolt penegang, longgarkan sedikit bolt pelekap yang mengikat kotak gear di tempatnya. Ini membolehkan kotak gear bergerak dan melaraskan ketegangan.
- Laraskan Ketegangan: Gunakan mekanisme pelarasan tegangan untuk meningkatkan atau mengurangkan tegangan pada tali sawat. Rujuk manual mesin pemotong rumput anda untuk spesifikasi tegangan yang disyorkan.
- Periksa Ketegangan: Selepas melaraskan, periksa ketegangan dengan menekan tali sawat pada titik tengah antara takal. Tali sawat hendaklah memberi sedikit tekanan, tetapi tidak berlebihan. Selain itu, periksa sama ada penjajaran takal betul.
- Ketatkan Bolt: Setelah ketegangan ditetapkan dengan betul, ketatkan bolt pelekap kotak gear untuk memastikannya berada di tempatnya.
- Operasi Ujian: Sambungkan semula wayar palam pencucuh dan hidupkan mesin pemotong rumput untuk memerhatikan operasi tali sawat. Dengar sebarang bunyi yang luar biasa dan pantau tali sawat untuk memastikan ia berfungsi dengan betul dengan takal.
Memeriksa dan melaraskan ketegangan tali sawat kotak gear secara berkala memastikan penghantaran kuasa yang cekap dan mencegah haus pramatang. Jika anda tidak pasti tentang pelarasan ketegangan yang betul, rujuk manual mesin pemotong rumput anda atau dapatkan bantuan daripada profesional.
Menggunakan Minyak Sintetik dalam Kotak Gear Pemotong Rumput Anda
Ya, anda boleh menggunakan minyak sintetik dalam kotak gear mesin pemotong rumput anda, dan dalam banyak kes, ia disyorkan kerana manfaatnya. Minyak sintetik menawarkan beberapa kelebihan berbanding minyak konvensional:
- Pelinciran yang Dipertingkatkan: Minyak sintetik memberikan pelinciran yang lebih baik, mengurangkan geseran dan haus pada komponen kotak gear.
- Kestabilan Suhu: Minyak sintetik berfungsi dengan baik dalam pelbagai suhu, memastikan pelinciran yang konsisten dalam keadaan panas dan sejuk.
- Rintangan terhadap Kerosakan: Minyak sintetik mempunyai daya tahan yang lebih tinggi terhadap kerosakan haba, yang membantunya mengekalkan sifat dan keberkesanannya dari semasa ke semasa.
- Selang Penukaran Minyak Lanjutan: Minyak sintetik selalunya tahan lebih lama daripada minyak konvensional, membolehkan selang penukaran minyak dilanjutkan.
- Deposit Dikurangkan: Minyak sintetik cenderung menghasilkan lebih sedikit mendapan dan enap cemar dalam kotak gear, sekali gus memastikan ia lebih bersih.
Sebelum beralih kepada minyak sintetik, adalah penting untuk:
- Semak cadangan pengilang: Sahkan sama ada kotak gear mesin pemotong rumput anda serasi dengan minyak sintetik.
- Pilih kelikatan yang betul: Pilih minyak sintetik dengan penarafan kelikatan yang sesuai untuk kotak gear mesin pemotong rumput anda.
- Pastikan pencampuran yang betul: Jika anda beralih daripada minyak konvensional kepada minyak sintetik, adalah amalan yang baik untuk mengalirkan minyak lama dengan teliti sebelum menambah minyak sintetik.
Menggunakan minyak sintetik boleh menyumbang kepada prestasi keseluruhan dan jangka hayat kotak gear pemotong rumput anda. Walau bagaimanapun, sentiasa rujuk manual pemotong rumput anda dan cadangan pengeluar minyak untuk hasil terbaik.
Key Components of a Mower Gearbox
A mower gearbox is a complex mechanical assembly consisting of various components that work together to transmit power and control the cutting blades. The key components of a mower gearbox include:
- Input Shaft: The input shaft is connected to the mower’s engine via a drive shaft. It receives the rotational power from the engine and transfers it to the gearbox.
- Gears: Gears are essential components responsible for transmitting and converting torque and speed. Mower gearboxes contain a set of gears, including input gears, intermediate gears, and output gears, that mesh together to achieve the desired torque and speed ratios.
- Output Shaft: The output shaft is connected to the cutting blades. It receives the torque from the gearbox and transfers it to the blades, causing them to rotate and perform the cutting action.
- Bearings: Bearings support the rotating shafts and gears within the gearbox, reducing friction and ensuring smooth movement. Ball bearings or roller bearings are commonly used to enhance the gearbox’s efficiency and longevity.
- Lubrication System: Mower gearboxes require proper lubrication to minimize friction and wear between moving parts. Lubrication ensures that the gears and bearings operate smoothly and efficiently.
- Housing: The gearbox housing encloses and protects the internal components from external elements. It also contains the lubricating oil and prevents dirt and debris from entering the gearbox.
- Meterai: Seals prevent the entry of contaminants such as water, dust, and dirt into the gearbox. They play a critical role in maintaining the integrity of the lubrication system and protecting the internal components.
- Clutches and Brakes: Some mower gearboxes feature clutches and brakes that allow for engagement and disengagement of the cutting blades. These components provide control over the cutting action and enable safe operation.
- Adjustment Mechanisms: Depending on the type of mower, the gearbox may include adjustment mechanisms for setting the cutting height or angle of the blades. These mechanisms enhance the mower’s versatility and performance.
The combination of these components within the mower gearbox ensures the effective transmission of power and precise control over the cutting blades, resulting in efficient and accurate mowing operations.
editor by CX 2023-12-12
